Monday, April 30, 2018

BUNNY

This is a pattern for a bunny requested by a former co-worker that is obsessed with bunnies.  This is my attempt to create a bunny based off one that she found online.  The colors that were used for the one online was white and lavender.  The one that she requested is blue and yellow.

MATERIALS:
Worsted Weight Yarn: White and lavender.
E crochet hook
Polyester Fiberfill
Tapestry needle
Sewing needle

ARMS (MAKE 2):
Rd 1: With white, 9 sc in magic ring.  (9)
Rd 2: (sc in next 2 sc, 2 sc in next sc) around.  (12)
Rd 3: (sc in next 3 sc, 2 sc in next sc) around.  (15)
Rds 4-5: sc in each sc around.  (15)
Rd 6: 3 sc in next 2 sc, sc in next 13 sc.  (19)
Rd 7: sc in each sc around.  (19)
Rd 8: (sc3tog) twice, sc in next 13 sc.  (15)
Rds 9-19: sc in each sc around.  (15)
Finish off.  Stuff ARMS firmly.

BODY:
Rd 1: With white, 8 sc in magic ring.  (8)
Rd 2: 2 sc in each sc around.  (16)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (24)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around.  (32)
Rd 5: (sc in next 3 sc, 2 sc in next sc) around.  (40)
Rd 6: (sc in next 4 sc, 2 sc in next sc) around.  (48)
Rd 7: (sc in next 11 sc, 2 sc in next sc) around.  (52)
Rd 8: (sc in next 12 sc, 2 sc in next sc) around.  (56)
Rds 9-19: sc in each sc around.  (56)
Rd 20: (sc in next 12 sc, sc2tog) around.  (52)
Rd 21: (sc in next 11 sc, sc2tog) around.  (48)
Rd 22: (sc in next 10 sc, sc2tog) around.  (44)
Rd 23: (sc in next 20 sc, sc2tog) around.  (42)
Rd 24: (sc in next 19 sc, sc2tog) around.  (40)
BEGIN STUFFING BODY FIRMLY.  CONTINUE STUFFING BODY FIRMLY AS YOU GO ALONG.
Rd 25: sc in next 7 sc, holding next sc on BODY and sc #11 on RIGHT ARM together and working through both thicknesses, sc in next 6 sc, sc in next 14 sc on BODY, holding next sc on BODY and sc #4 on LEFT ARM together and working through both thicknesses, sc in next 6 sc, sc in next 7 sc.
Rd 26: sc in next 7 sc, sc in next 9 sc on RIGHT ARM, sc in next 14 sc on BODY, sc in next 9 sc on LEFT ARM, sc in next 7 sc.  (46)
Rd 27: sc in next 6 sc, (sc2tog, sc in next sc) 3 times, sc2tog, sc in next 12 sc, (sc2tog, sc in next sc) 3 times, sc2tog, sc in next 6 sc.  (38)
Rd 28: (sc in next 6 sc, sc2tog) 3 times, (sc in next 5 sc, sc2tog) twice.  (33)
Rd 29: (sc in next 9 sc, sc2tog) around.  (30)
Rd 30: sc in each sc around.  (30)
Rd 31: (sc in next 2 sc, 2 sc in next sc) around.  (40)
Rd 32: sc in next 11 sc, 2 sc in next 4 sc, sc in next 16 sc, 2 sc in next 4 sc, sc in next 5 sc.  (48)
Rd 33: sc in next 11 sc, (sc in next sc, 2 sc in next sc) 4 times, sc in next 16 sc, (sc in next sc, 2 sc in next sc) 4 times, sc in next 5 sc. (56)
Rds 34-36: sc in each sc around.  (56)
Rd 37: sc in next 13 sc, (sc in next sc, sc2tog) 4 times, sc in next 16 sc, (sc in next sc, sc2tog) 4 times, sc in next 3 sc.  (48)
Rd 38: sc in next 14 sc, sc2tog, sc in next sc, sc2tog, sc in next 19 sc, sc2tog, sc in next sc, sc2tog, sc in next 5 sc.  (44)
Rd 39: sc in next 12 sc, sc2tog, sc in next 13 sc, sc2tog, sc in next 13 sc, sc2tog.  (41)
Rd 40: sc in each sc around.  (41)
Rd 41: sc in next 10 sc, sc2tog, sc in next 29 sc.  (40)
Rd 42: sc in each sc around.  (40)
Rd 43: sc in next 12 sc, sc2tog, (sc in next 11 sc, sc2tog) around.  (37)
Rd 44: (sc in next 4 sc, sc2tog) 6 times, sc in next sc.  (31)
Rd 45: sc in next 5 sc, sc2tog, (sc in next 6 sc, sc2tog) around.  (27)
Rd 46: (sc in next 2 sc, sc2tog) 3times, (sc in next sc, sc2tog) 5 times.  (19)
Rd 47: (sc in next 2 sc, sc2tog) 4 times, sc in next sc, sc2tog.  (14)
Rd 48: (sc in next sc, sc2tog) 4 times, sc in next 2 sc.  (10)
Rd 49: sc2tog around.  (5)
Finish off leaving a long tail.  Weave tail through sc of Rd 49, pull tightly and secure.  Weave in ends.

MUZZLE:
Rd 1: With white, ch 4, 2 sc in second ch from hook, sc in next ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 2 ch.  (8)
Rd 2: 2 sc in each sc around.  (16)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (24)
Rds 4-5: sc in each sc around.  (24)
Finish off leaving a long tail.  Sew MUZZLE on head of BODY stuffing before closing.

NOSE AND EYES:
Embroider NOSE and EYES on head of BODY.

TOES (MAKE 6):
Rd 1: With white, 6 sc in magic ring.  (6)
Rd 2: (sc in next 2 sc, 2 sc in next sc) around.  (8)
Rds 3-4: sc in each sc around.  (8)
Finish off in first 2 TOES for each FOOT.  DO NOT FINISH OFF in third TOE for each FOOT.

FEET (MAKE 2):
Rd 1: sc in next 4 sc on TOE #3, sc in next 4 sc on TOE #1, sc in next 8 sc on TOE #2, sc in next 4 sc on TOE #1, sc in next 4 sc on TOE #3.  (24)
Rds 2-12: sc in each sc around.  (24)
Rd 13: (sc in next 2 sc, sc2tog) around.  (18)
Rd 14: (sc in next sc, sc2tog) around.  (12)
STUFF FEET FIRMLY.
Rd 15: sc2tog around.  (6)
Finish off leaving a long tail.  Weave tail through sc of Rd 15, pull tightly and secure.  Sew FEET to BODY.

FOOT PADS (MAKE 2):
Rd 1: With lavender, 6 sc in magic ring.  (6)
Rd 2: 2 sc in each sc around.  (12)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (18)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around.  (24)
Finish off leaving a long tail.  Sew FOOT PADS to FEET.

EARS (MAKE 2):
INNER EARS (MAKE 2):
Rd 1:   With lavender, ch 30, sc in second ch from hook, sc in next 27 ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 27 ch, 3 sc in next ch.  (60)
Rd 2: sc in next 28 sc, 2 sc in next 3 sc, sc in next 28 sc, 3 sc in next sc. (65)
Rd 3: sc in next 29 sc, 2 sc in next 4 sc, sc in next 30 sc, 3 sc in next sc, sc in next sc.  (71)
Rd 4: sc in next 30 sc, (2 hdc in next sc, hdc in next sc) 3 times, 2 hdc in next sc, sc in next 32, 3 sc in next sc, sc in next sc.  (77)
Rd 5: sc in next 32 sc, (2 sc in next st, sc in next st) 3 times, 2 sc in next st, sc in next 34 sc, (2 sc in next sc, sc in next sc) twice.  (83)
Rd 6: sc in next 30 sc, hdc in next 4 sts, (2 hdc in next st, hdc in next st) 3 times, 2 hdc in next st, hdc in next 4 sts, sc in next 32 sc, 2 sc in next sc, sc in next 3 sc, 2 sc in next sc, sc in next 2 sc.  (89)
Rd 7: sc in next 35 sc, (2 sc in next st, sc in next st) 3 times, 2 sc in next st, sc in next 39 sc, (2 sc in next sc, sc in next 3 sc) twice.  (95)
OUTER EARS (MAKE 2):
Rd 1:   With white, ch 30, sc in second ch from hook, sc in next 27 ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 27 ch, 3 sc in next ch.  (60)
Rd 2: sc in next 28 sc, 2 sc in next 3 sc, sc in next 28 sc, 3 sc in next sc. (65)
Rd 3: sc in next 29 sc, 2 sc in next 4 sc, sc in next 30 sc, 3 sc in next sc, sc in next sc.  (71)
Rd 4: sc in next 30 sc, (2 hdc in next sc, hdc in next sc) 3 times, 2 hdc in next sc, sc in next 32, 3 sc in next sc, sc in next sc.  (77)
Rd 5: sc in next 32 sc, (2 sc in next st, sc in next st) 3 times, 2 sc in next st, sc in next 34 sc, (2 sc in next sc, sc in next sc) twice.  (83)
Rd 6: sc in next 30 sc, hdc in next 4 sts, (2 hdc in next st, hdc in next st) 3 times, 2 hdc in next st, hdc in next 4 sts, sc in next 32 sc, 2 sc in next sc, sc in next 3 sc, 2 sc in next sc, sc in next 2 sc.  (89)
Rd 7: sc in next 35 sc, (2 sc in next st, sc in next st) 3 times, 2 sc in next st, sc in next 39 sc, (2 sc in next sc, sc in next 3 sc) twice.  (95)
Rd 8: Holding INNER EAR and OUTER EAR together and working through both thicknesses, sc in each sc around.  (95)
Finish off leaving a long tail.  Sew EARS to BODY.

TAIL:
Rd 1: With lavender, 6 sc in magic ring.  (6)
Rd 2: 2 sc in each sc around.  (12)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (18)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around.  (24)
Rds 5-8: sc in each sc around.  (24)
Rd 9: (sc in next 2 sc, sc2tog) around.  (18)
Rd 10: (sc in next sc, sc2tog) around.  (12)
STUFF TAIL FIRMLY.
Rd 11: sc2tog around.  (6)
Finish off leaving a long tail.  Weave tail through sc of Rd 11, pull tightly and secure.  Sew TAIL to BODY.

This pattern is an original pattern and is © by Christjan Bee (April 2018). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint it on your site. You may keep a copy for your own personal use, but you may not sell or distribute it, or sell items made from this pattern.


ANNIE'S BALL

This is part of a continued series of PokeBalls.  This is a Annie’s Bal.  Great Ball is one of many PokeBalls available in the Pokemon video games.  This Great Ball can be made two different ways.  It can be made by simply stuffing the Annie’s Ball with Polyester Fiberfill or by inserting a tennis ball where indicated.  I made the one featured in the photo with a tennis ball inside.

MATERIALS:
Worsted weight yarn: Black, gray, white, and red.
F crochet hook
Tennis ball or Polyester Fiberfill
Tapestry needle

BALL:
Rd 1: With black, 6 sc in magic ring.  (6)
Rd 2: 2 sc in each sc around.  (12)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (18)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around.  (24)
Rd 5: (sc in next 3 sc, 2 sc in next sc) around.  (30)
Rd 6: (sc in next 4 sc, 2 sc in next sc) around.  (36)
Rd 7: (sc in next 5 sc, 2 sc in next sc) around.  (42)
Rd 8: sc in each sc around.  (42)  Change to gray.
Rd 9: sc in each sc around.  (42)
Rd 10: sc in each sc around.  (42)  Change to white.
Rd 11: sc in each sc around.  (42)
Rd 12: (sc in next 5 sc, sc2tog) around.  (36)
Rd 13: (sc in next 4 sc, sc2tog) around.  (30)
IF INSERTING TENNIS BALL, WHILE HOLDING IN PLACE, CONTINUE TO CROCHET AROUND IT.  YOU MAY NEED TO PULL YOUR FINISHED WORK TIGHTLY TO GET IT TO COVER TO COMPLETELY.
Rd 14: (sc in next 3 sc, sc2tog) around.  (24)
Rd 15: (sc in next 2 sc, sc2tog) around.  (18)
IF YOU ARE STUFFING THE GREAT BALL, THIS WOULD BE WHEN YOU WILL BE ADDING TO THE STUFFING.  CONTINUE STUFFING TO ACHIEVE DESIRED FIRMNESS.
Rd 16: (sc in next sc, sc2tog) around.  (12)
Rd 17: sc2tog around.  (6)
Finish off leaving a long tail.  Weave tail through sc of Rd 17, pull tightly, and secure.  Weave in ends.

BUTTON:
Rd 1: With white, ch 2, 4 sc in second ch from hook working around ch, slip st in first sc changing to gray.  (4)
Rd 2: Ch 1, 2 sc in each sc around, slip st in first sc.  (8)
Finish off leaving a long tail.  Sew BUTTON to ANNIE’S BALL over Rds 9 and 10.

LIPS:
Rd 1: With red, ch 5, sc in second ch from hook, sc in next 2 ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 2 ch, 2 sc in next ch.  (10)
Rd 2: (sc in next 4 sc, 3 sc in next sc) around.  (14)
Rd 3: sc in next sc, 3 hdc in next sc, slip st in next sc, 3 hdc in next sc, sc in next sc, slip st in next sc.
Finish off leaving a long tail.  Sew LIPS to ANNIE’S BALL.  Using black, embroider spot on LIPS.

Annie’s Ball, PokeBall, Pokemon is copyright Nintendo and their respective creators.

This crochet pattern is an original pattern and is © by Christjan Bee (October 2017).  Please do not claim this pattern as your own.  If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site.  You may print and keep a copy for your own personal use but you may not sell or distribute it, or sell items made from this pattern.

MAGNASAUR

Magnasaur is another concept drawn up by one of my Etsy customers.  Magnasaur would be considered a Fire-type Pokemon in the Pokemon game.  Magnasaur looks a lot like Tyrantrum from Pokemon X and Y. 

MATERIALS:
Worsted weight yarn:  Red, white, orange, black, and yellow.
E crochet hook
Polyester Fiberfil
Tapestry needle

NOTES:
Exsc = extended single crochet – insert hook one Rd below current Rd, YO, pull up loop, YO, and pull through loops on hook.

TOP OF HEAD:
Rd 1: With red, ch 7, sc in second ch from hook, sc in next 4 ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 5 ch.  (13)
Rd 2: Ch 1, turn; sc in next 6 sc, 3 sc in next sc, sc in next 6 sc.  (15)
Rd 3: Ch 1, turn; sc in next 7 sc, 3 sc in next sc, sc in next 7 sc.  (17)
Rd 4: Ch 1, turn; sc in next 8 sc, 3 sc in next sc, sc in next 8 sc.  (19)
Rd 5: Ch 1, turn; sc in next 9 sc, 2 sc in next sc, sc in next 9 sc.  (20)
Rds 6-7: Ch 1, turn; sc in each sc around.  (20)
Finish off.  Weave in ends.

BOTTOM OF HEAD:
Rd 1: With red, ch 7, sc in second ch from hook, sc in next 4 ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 5 ch.  (13)
Rd 2: Ch 1, turn; sc in next 5 sc, 2 sc in next 3 sc, sc in next 5 sc.  (16)
Rd 3: Ch 1, turn; sc in next 7 sc, 2 sc in next 2 sc, sc in next 7 sc.  (18)
Rd 4: Ch 1, turn; sc in next 8 sc, 2 sc in next 2 sc, sc in next 8 sc.  (20)
Rd 5: Ch 1, turn; sc in each sc around.  (20)
Rd 6: Ch 1, turn; holding next sc on BOTTOM OF HEAD and first sc on TOP OF HEAD together and working through both thicknesses, sc in each sc around.  (20)
Finish off.  Weave in ends.

BACK OF HEAD:
Rd 1: Attach red, in center of BOTTOM OF HEAD, ch 1, sc in same ch, sc in side of next 5 Rws, sc in side of next 7 Rws of TOP OF HEAD, sc in next ch of TOP OF HEAD, sc in side of next 7 Rws of TOP OF HEAD, sc in side of next 5 Rws of BOTTOM OF HEAD, sc in same ch as first sc.  (27)
Rd 2: Working in back loops only, sc in each sc around.  (27)
Rd 3: (sc in next sc, sc2tog) around.  (18)
STUFF HEAD FIRMLY.
Rd 4: sc2tog around.  (9)
Finish off leaving a long tail.  Weave tail through sc of Rd 4, pull tightly and secure.

TOP OF HEAD FINS:
Rw 1: Working over sc of Rd 2 and starting 6 sc from back edge, attach black, ch 1, sc in same sc as attachment, sc in next 5 sc.  (6)
Rw 2: Ch 1, turn; 2 sc in next sc, slip st in next sc, leaving remaining sc unworked.
Finish off.  Weave in ends.  Repeat a second time of the other side of Rd 2.

MOUTH, TEETH AND EYES:
Embroider MOUTH, TEETH, and EYES of head of MAGNASAUR.

SIDEBURNS:
LEFT SIDEBURN:
Rw 1: Working in free loops of Rd 1 of BACK OF HEAD, skip next 2 sc, attach red, (ch 2, sc in second ch from hook, skip next sc, slip st in next sc) twice, ch 2, dc in next sc, tr in next sc, (dc, ch 2, slip st) in next sc.
Finish off.  Weave in ends.
RIGHT SIDEBURN:
Rw 1: Working in free loop s of Rd 1 of BACK OF HEAD, skip next 7 from LEFT SIDEBURN, attach red, (ch 2, dc) in same sc as attachment, tr in next sc, dc in next sc, ch 2, slip st in next sc, (ch 2, sc in second ch from hook, skip next sc, slip st in next sc) twice.
Finish off.  Weave in ends.

BODY:
Rd 1: With white, 9 sc in magic ring.  (9)
Rd 2: sc in each sc around.  (18)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (27)
Rd 4: Working in back loops only, sc in each sc around.  (27)
Rd 5: sc in each sc around.  (27)
Rd 6: (sc in next 8 sc, 2 sc in next sc) around.  (30)
Rds 7-8: sc in each sc around.  (30)
Rd 9: (sc in next 9 sc, 2 sc in next sc) around.  (33)
Rds 10-11: sc in each sc around.  (33)
Rd 12: (sc in next 10 sc, 2 sc in next sc) around.  (36)
Rds 13-22: sc in each sc around.  (36)
Rd 23: sc in next 13 sc, (sc2tog, sc in next sc) 3 times, sc2tog, sc in next 12 sc.  (32)
Rds 24-25: sc in each sc around.  (32)
Rd 26: sc in next 12 sc, (sc2tog, sc in next sc) twice, sc2tog, sc in next 12 sc.  (29)
Rds 27-28: sc in each sc around.  (29)
Rd 29: sc in next 12 sc, sc2tog, sc in next sc, sc2tog, sc in next 12 sc.  (27)
Rds 30-31: sc in each sc around.  (27)
BEGIN STUFFING BODY AT THIS POINT.  CONTINUE STUFFING FIRMLY AS YOU GO.
Rd 32: (sc in next 7 sc, sc2tog) around.  (24)
Rds 33-34: sc in each sc around.  (24)
Rd 35: (sc in next 6 sc, sc2tog) around.  (21)
Rds 36-37: sc in each sc around.  (21)
Rd 38: (sc in next 5 sc, sc2tog) around.  (18)
Rds 39-40: sc in each sc around.  (18)
Rd 41: (sc in next 4 sc, sc2tog) around.  (15)
Rds 42-43: sc in each sc around.  (15)
Rd 44: (sc in next 3 sc, sc2tog) around.  (12)  Change to black.
Rd 45: (sc in next sc, exsc in next sc) around.  (12)
Rd 46: sc in each sc around.  (12)
Rd 47: (sc in next 2 sc, sc2tog) around.  (9)
Rds 48-50: sc in each sc around.  (9)
Rd 51: (sc in next sc, sc2tog) around.  (6)
Rds 52-54: sc in each sc around.  (6)
Rd 55: (sc in next sc, sc2tog) around.  (4)
Finish off leaving a long tail.  Weave tail through sc of Rd 55, pull tightly and secure.  Weave in ends.

FRILL:
Rd 1: Working in free loops of Rd 3 of BODY, skip next 5 sc, attach orange in next sc, ch 1, sc in same sc as attachment, sc in next sc, 2 sc in next sc, (sc in next 2 sc, 2 sc in next sc) 6 times, leaving remaining sc unworked.  (28)
Rd 2: Ch 1, turn; (sc in next 3 sc, 2 sc in next sc) around.  (35)
Rd 3: Ch 1, turn; (sc in next 4 sc, 2 sc in next sc) around.  (42)
Rd 4: Ch 1, turn; (sc in next 5 sc, 2 sc in next sc) around.  (49)
Rd 5: Ch 1, turn; (sc in next 6 sc, 2 sc in next sc) around.  (56)
Rd 5: Ch 1, turn; [(exsc in next sc, sc in next sc) 3 times, exsc in next sc, 2 sc in next sc] around.  (63)
Rd 6: (Ch 8, sc in second ch from hook, sc in next ch, hdc in next ch, dc in next 2 ch, tr in next 2 ch, skip next 6 sc, slip st in next sc) 9 times.
Finish off.  Weave in ends.  Using black, embroider spots on FRILL.  Sew BODY to HEAD.

TOE NAILS (MAKE 6):
Rd 1: With white, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: (sc in next sc, 2 sc in next sc) around.  (6)
Finish off.

LEGS (MAKE 2):
Rd 1: With orange, 8 sc in magic ring.  (8)
Rd 2: 2 sc in each sc around.  (16)
Rd 3: sc in next 5 sc, (holding next sc on FRONT LEGS and next sc on TOE NAILS together and working through both thicknesses, sc in next sc, sc in together next sc on FRONT LEGS and next 2 sc on TOENAILS) 3 times, sc in next 5 sc.  (16)
Rd 4: sc in next 5 sc, (sc in next sc on TOE NAILS, sc together next 2 sc on TOE NAILS) 3 times, sc in next 5 sc.  (16)
Rd 5: sc in next 5 sc, (sc2tog) 3 times, sc in next 5 sc.  (13)
Rd 6: sc in next 4 sc, (sc2tog) 3 times, sc in next 3 sc, slip st in first sc.  (10)
NOW WORKING IN JOINED ROUNDS
Rds 7-8: Ch 1, turn; sc in each sc around, slip st in first sc.  (10)
Rd 9: Ch 1, turn; sc in each sc around, slip st in first sc changing to red.  (10)
Rd 10: Ch 1, turn; (sc in next sc, exsc in next sc) around, slip st in first sc.  (10)
Rds 11-13: Ch 1, turn; sc in each sc around, join.  (10)
BEGIN STUFFING FRONT LEGS FIRMLY.  CONTINUE STUFFING FIRMLY AT BOTTOM AND MEDUIM LIGHT AT TOP SO IT CAN BE FLATTENED
Rd 14: Ch 1, turn; sc in next 3 sc, 2 sc in next 4 sc, sc in next 3 sc, join.  (14)
Rd 15: Ch 1, turn; sc in next 5 sc, 2 sc in next 4 sc, sc in next 5 sc, join.  (18)
Rd 16: Ch 1, turn; (sc2tog) twice, sc in next 10 sc, (sc2tog) twice, join.  (14)
Rd 17: Ch 1, turn; (sc2tog) twice, sc in next 6 sc, (sc2tog) twice, join.  (10)
Rd 18: Ch 1, turn; sc in next 4 sc, 2 sc in next 2 sc, sc in next 4 sc, join.  (12)
Rd 19: Ch 1, turn; (sc in next 5 sc, 2 sc in next sc) around, join.  (14)
Rd 20: Ch 1, turn; (sc in next 6 sc, 2 sc in next sc) around, join.  (16)
NOW WORKING IN UNJOINED ROUNDS
Rd 21: Ch 1, (sc in next 7 sc, 2 sc in next sc) around.  (18)
Rds 22-25: sc in each sc around.  (18)
Rd 26: (sc in next sc, sc2tog) around.  (12)
Rd 24: (sc in next sc, sc2tog) around.  (8)
Finish off leaving a long tail.  Sew LEGS to BODY.

LEG MARKINGS (MAKE 2):
Rd 1: With black, ch 6, sc in second ch from hook, sc in next 3 ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 3 ch, 2 sc in next ch.  (12)
Rd 2: (sc in next 5 sc, 3 sc in next sc) around.  (16)
Finish off leaving a long tail.  Sew LEG MARKINGS to LEGS while embroidering side points.

FINGERN NAILS (MAKE 2):
Rd 1: With white, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Finish off.  Weave in ends.

ARMS (MAKE 2):
Rd 1: Attach orange in first sc of FINGER NAIL #1, ch 1, sc in same sc as attachment, sc in next sc, sc in next 2 sc on FINGER NAIL #2, sc in next 4 sc on FINGER NAIL #3, sc in next 2 sc on FINGER NAIL #2, sc in next 2 sc on FINGER NAIL #1.  (12)
Rds 2-4: sc in each sc around.  (12)
Rd 5: sc in next 5 sc, sc2tog, sc in next 5 sc.  (11)
Rd 6: sc2tog, sc in next 9 sc.  (10)
Rd 7: sc in next 4 sc, sc2tog, sc in next 4 sc.  (9)
Rd 8: sc2tog, sc in next 7 sc.  (8)  Change to red.
Rd 9: (sc in next sc, exsc in next sc) around.  (8)
Rds 10-16: sc in each sc around.  (8)
Finish off leaving a long tail.  Stuff ARMS firmly.  Sew ARMS to BODY.

BACK SPOT:
Rd 1: With black, ch 10, 2 sc in second ch from hook, sc in next 7 ch, 4 sc in next ch working around ch, working in free loops of foundation ch, sc in next 7 ch, 2 sc in next ch.  (22)
Rd 2: 2 sc in next 2 sc, sc in next 7 sc, 2 sc in next 4 sc, sc in next 7 sc, 2 sc in next 2 sc.  (30)
Rd 3: (sc in next sc, 2 sc in next sc) twice, sc in next 7 sc, (sc in next sc, 2 sc in next sc) 4 times, sc in next 7 sc, (sc in next sc, 2 sc in next sc) twice.  (38)
Rd 4: slip st in next 2 sc, ch 4, sc in second ch from hook, hdc in next ch, dc in next ch, skip next 3 sc, slip st in next sc, (ch 4, sc in second ch from hook, hdc in next ch, dc in next ch, skip next 5 sc, slip st in next sc) twice, ch 4, sc in second ch from hook, hdc in next ch, dc in next ch, skip next 3 sc, slip st in next 2 sc, ch 4, sc in second ch from hook, hdc in next ch, dc in next ch, skip next 3 sc, slip st in next sc, (ch 4, sc in second ch from hook, hdc in next ch, dc in next ch, skip next 5 sc, slip st in next sc) twice, ch 4, sc in second ch from hook, hdc in next ch, dc in next ch, skip next 3 sc, slip st in next sc.
Finish off leaving a long tail.  Sew BACK SPOT to BODY.

BACK FUR:
Fringe on pieces of black on center of BACK SPOT.

Tyrantrum and Pokemon are copyright Nintendo and their respective creators.

This crochet pattern is an original pattern and is © by Christjan Bee (April 2018).  Please do not claim this pattern as your own.  If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site.  You may print and keep a copy for your own personal use, but you may not sell or distribute it, or sell items made from this pattern.



IRON STAR

This is the item requested by my returning customer that usually orders Pokemon.  He has decided to have me work on a few self-designed adaptations of Pokemon and other popular characters.  This is adaptation of a character that I would assume would fit into the Power Ranger realm.  

MATERIALS:
Worsted weight yarn:  Chery red, black, yellow, charcoal,
E Crochet hook
Polyester fiberfill
Tapestry needle
2 blue jewels
Glue

ARMS (MAKE 2):
Rd 1: With white, 6 sc in magic ring.  (6)
Rd 2: (sc in next 2 sc, 2 sc in next sc) around.  (8)
Rds 3-8: sc in each sc around.  (8)
Rd 9: (sc in next 3 sc, 2 sc in next sc) around.  (10)
BEGIN STUFFING THE ARMS FIRMLY.  CONTINUE STUFFING AS YOU GO.
Rds 10-16: sc in each sc around.  (10)
Finish off.

LEGS (MAKE 2):
Rd 1: With charcoal, 8 sc in a magic ring.  (8)
Rds 2-4: sc in each sc around.  (8)
NOW WORKING IN ROWS.
Rw 5: sc in next 4 sc leaving remaining sc of Rd 4 unworked.  (4)
Rw 6: Ch 1, turn; sc in next 4 sc.  (4)
Rw 7: Ch 1, turn; sc2tog twice.  (2)
NOW WORKING IN RDS AGAIN.
Rd 8: Ch 1, sc in the side of Rows 5-7, slip st in unworked sc on Rd 4, sc in the side of Rows 5-7, sc in top of sc of Row 7.  (12)
Rd 9: (sc in next 4 sc, sc2tog) around.  (10)
Rd 10: sc2tog, sc in next 6 sc, sc2tog.  (8)
BEGIN STUFFING THE LEGS FIRMLY.  CONTINUE STUFFING AS YOU GO.
Rds 11-13: sc in each sc around.  (8)
Rd 14: sc in next sc, 2 sc in next sc, sc in next 6 sc.  (9)
Rd 15: sc in each sc around.  (9)
Rd 16: sc in next 2 sc, 2 sc in next sc, sc in next 5 sc.  (10)
Rds 17-20: sc in each sc around.  (10)
Rd 21: sc in next 4 sc, sc2tog, sc in next 4 sc.  (9)
Rds 22-23: sc in each sc around.  (9)
LEFT LEG:
Rd 24: slip st in next sc, ch 1, sc in same sc as slip st, 2 sc in next sc, change to red, sc in next 7 sc, slip st in first sc.  (10)
Rd 25: Ch 1, turn; sc in next 7 sc, change to charcoal, sc in next 3 sc, slip st in first sc.  (10)
Rd 26: Ch 1, turn; sc in next 3 sc, change to red, sc in next 3 sc, 2 sc in next sc, sc in next 3 sc, slip st in first sc.  (11)
Rd 27: Ch 1, turn; sc in each sc around, slip st in first sc.  (11)
Rd 28: Ch 1, turn; sc in next sc, 2 sc in next sc, sc in next 6 sc, change to charcoal, sc in next 3 sc, slip st in first sc.  (12)
Rd 29: Ch 1, turn; sc in next 3 sc, change to red, sc in next 9 sc, slip st in first sc.  (12)
Rd 30: Ch 1, turn; sc in next 9 sc, change to charcoal, sc in next 3 sc, slip st in first sc.  (12)
Rd 31: Ch 1, turn; sc in next 3 sc, change to red, sc in next 9 sc, slip st in first sc.  (12)
Finish off.  Weave in ends.
RIGHT LEG:
Rd 24: slip st in next sc, ch 1, sc in same sc as slip st, 2 sc in next sc, change to red, sc in next 7 sc, slip st in first sc.  (10)
Rd 25: Ch 1, turn; sc in next 7 sc, change to charcoal, sc in next 3 sc, slip st in first sc.  (10)
Rd 26: Ch 1, turn; sc in next 3 sc, change to red, sc in next 3 sc, 2 sc in next sc, sc in next 3 sc, slip st in first sc.  (11)
Rd 27: Ch 1, turn; sc in each sc around, slip st in first sc.  (11)
Rd 28: Ch 1, turn; sc in next sc, 2 sc in next sc, sc in next sc, change to charcoal, sc in next 3 sc, change to red, sc in next 5 sc, slip st in first sc.  (12)
Rd 29: Ch 1, turn; sc in next 5 sc, change to charcoal, sc in next 3 sc, change to red, sc in next 4 sc, slip st in first sc.  (12)
Rd 30: Ch 1, turn; sc in next 4 sc, change to charcoal, sc in next 3 sc, change to red, sc in next 5 sc, slip st in first sc.  (12)
Rd 31: Ch 1, turn; sc in next 5 sc, change to charcoal, sc in next 3 sc, change to red, sc in next 4 sc, slip st in first sc.  (12)
Finish off.  Weave in ends.

THIGH GUARDS (MAKE 2):
Rd 1: With red, ch 4, sc in second ch from hook, sc in next ch, 4 sc in next ch working around ch, working in free loops of foundation ch, sc in next 2 ch, slip st in first sc.  (8)
Finish off leaving a long tail.  Sew THIGH GUARDS to LEGS.

GLOVES (MAKE 2):
Rd 1: With charcoal, 6 sc in magic ring.  (6)
Rd 2: (sc in next 2 sc, 2 sc in next sc) around.  (8)
Rds 3-4: sc in each sc around.  (8)
Rd 5: 3 sc in next 2 sc, sc in next 6 sc.  (12)
Rd 6: sc in each sc around.  (12)
Rd 7: (sc3tog) twice, sc in next 6 sc.  (8)
Rd 8: (sc in next 2 sc, sc2tog) around.  (6)  Change to red.
Rd 9: (sc in next 2 sc, 2 sc in next sc) around.  (8)
Rd 10: (sc in next sc, 2 sc in next sc) around.  (12)
LEFT GLOVE:
Rd 11: sc in next 6 sc, 2 sc in next 2 sc, sc in next 4 sc.  (14)
Rds 12-16: sc in each sc around.  (14)
RIGHT GLOVE:
Rd 11: 2 sc in next sc, sc in next 10 sc, 2 sc in next sc.  (14)
Rds 12-16: sc in each sc around.  (14)
Finish off.  Slip GLOVES over lower portion of ARMS and sew in place.

FOREARM PLATE:
Rd 1: With black, ch 5, 2 sc in second ch from hook, hdc in next 2 ch, 4 sc in next ch working around ch, working in free loops of foundation ch, hdc in next 2 ch, 2 sc in next ch.  (12)
Rd 2: 2 sc in next 2 sc, sc in next 2 hdc, 2 sc in next 4 sc, sc in next 2 hdc, 2 sc in next 2 sc.  (20)
Finish off leaving a long tail.  Sew FOREARM PLATE to GLOVES.

BOOTS (MAKE 2):
Rd 1: With charcoal, ch 6, 2 sc in second ch from hook, sc in next 3 ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 4 ch.  (12)
Rd 2: (3 sc in next sc, sc in next 5 sc) around.  (16)
Rd 3: Working in back loops only, sc in each sc around.   (16)  Change to red
Rds 4-5: sc in each sc around.  (16)
Rd 6: slip st in next 3 sc, ch 1, sc in same sc as last slip st, sc in next 3 sc, (sc2tog) 4 time, sc in next 4 sc.  (12)
NOW WORKING IN ROWS.
Rws 7-8: Ch 1, turn; sc in each sc across.  (12)  Change to charcoal.
Rws 9-10: Ch 1, turn; sc in each sc across.  (12)
Rw 11: Ch 1, turn; 2 sc in next sc, sc in next 10 sc, 2 sc in next sc.  (14)
Rws 12-16: Ch 1, turn; sc in each sc across.  (14)
Finish off leaving a long tail.  Place BOOTS on LEGS and sew back seam closed.

BOOT FRONT PLATE (MAKE 2):
Rw 1: With red, ch 15, 2 sc in second ch from hook, sc in next 12 ch, 2 sc in next ch.  (16)
Rw 2: Ch 1, turn; 2 sc in next sc, sc in next 14 sc, 2 sc in next sc.  (18)
Rw 3: Ch 1, turn; sc2tog, sc in next 14 sc, sc2tog.  (16)
Rw 4: Ch 1, turn; sc2tog, change to charcoal, sc in next 12 sc, change to red, sc2tog.  (14)
Rws 5-7: Ch 1, turn; sc in next sc, change to charcoal, sc in next 12 sc, change to red, sc in next sc.  (14)
Rw 8: Ch 1, turn; 2 sc in next sc, sc in next 12 sc, 2 sc in next sc.  (16)
Rw 9: Ch 1, turn; sc2tog, sc in next 12 sc, sc2tog.  (14)
Rw 10: Ch 1, turn; sc2tog, sc in next 2 sc, sc2tog, slip st in next 2 sc, sc2tog, sc in next 2 sc, sc2tog.
Finish off leaving a long tail.  Sew BOOT FRONT PLATE to BOOTS.

KNEE GUARDS 1 (MAKE 2):
Rw 1: With charcoal, ch 3, sc in second ch from hook and in next ch.  (2)
Rws 2-5: Ch 1, turn; sc in each sc across.  (2)
Rw 6: Ch 1, turn; 2 sc in each sc across.  (4)
Rw 7: Ch 1, turn; sc in each sc across.  (4)  Change to red.
Rw 8: Ch 1, turn; sc in each sc across.  (4)
Rw 9: Ch 1, turn; 2 sc in next sc, sc in next 2 sc, 2 sc in next sc.  (6)
Rws 10-11: Ch 1, turn; sc in each sc across.  (6)
Rw 12: Ch 1, turn; sc2tog, sc in next 2 sc, sc2tog.  (4)
Rw 13: Ch 1, turn; sc2tog, sc2tog.  (2)
Finish off leaving a long tail.  Sew KNEE GUARDS 1 to BOOT FRONT PLATE.

KNEE GUARDS 2 (MAKE 2):
Rd 1: With red, ch 5, 2 sc in second ch from hook, sc in next 2 ch, 4 sc in next ch working around ch, working in free loops of foundation ch, sc in next 2 ch, 2 sc in next ch, slip st in first sc.  (12)
Finish off leaving a long tail.  Sew KNEE GUARDS 2 to KNEE GUARDS 1.  Using yellow, embroider star on assembled KNEE GUARDS.

BREASTPLATE:
 Rw 1: With charcoal, ch 16, sc in second ch from hook and in each ch across.  (15)
Rw 2: Ch 1, turn; sc in each sc across.  (15)  Change to red.
Rws 3-4: Ch 1, turn; sc in each sc across.  (15)
Rw 5: Ch 1, turn; sc2tog, sc in next 11 sc, sc2tog.  (13)
Rw 6: Ch 1, turn; sc2tog, sc in next 9 sc, sc2tog.  (11)
Rws 7-10: Ch 1, turn; sc in each sc across.  (11)
Rw 11: Ch 1, turn; sc in next 2 sc, change to charcoal, sc in next 7 sc, change to red, sc in next 2 sc.  (11)
Rw 12: Ch 1, turn; sc in next sc, change to charcoal, sc in next 9 sc, change to red, sc in next sc.  (11)
RIGHT SHOULDER:
Rw 13: Ch 1, turn; sc in next sc, change to charcoal, sc in next 2 sc, sc2tog.  (4)
Rw 14: Ch 1, turn; sc2tog, sc in next sc, change to red, sc in next sc.  (3)
Rw 15: Ch 1, turn; sc in next sc, change to charcoal, sc in next 2 sc.  (3)
Rw 16: Ch 1, turn; sc in next 2 sc, change to red, sc in next sc.  (3)
Finish off.  Weave in ends.
LEFT SHOULDER AND BACK:
Rw 13: With wrong side facing, attach red in first sc, ch 1, sc in same sc as attachment, change to charcoal, sc in next 2 sc, sc2tog.  (4)
Rw 14: Ch 1, turn; sc2tog, sc in next sc, change to red, sc in next sc.  (3)
Rw 15: Ch 1, turn; sc in next sc, change to charcoal, sc in next 2 sc.  (3)
Rw 16: Ch 1, turn; sc in next 2 sc, change to red, sc in next sc.  (3)
Rw 17: Ch 1, turn; sc in next sc, change to charcoal, sc in next sc, (sc, change to red, sc) in next sc, ch 3, working in sc of RIGHT SHOULDER, (sc, change to charcoal, sc) in next sc, sc in next sc, change to red, sc in next sc.
Rw 18: Ch 1, turn; sc in next 2 sc, change to charcoal, sc in next 2 sc, change to red, sc in next 3 ch, change to charcoal, sc in next 2 sc, change to red, sc in next 2 sc.  (11)
Rws 19-24: Ch 1, turn; sc in next 2 sc, change to charcoal, sc in next 2 sc, change to red, sc in next 3 sc, change to charcoal, sc in next 2 sc, change to red, sc in next 2 sc.  (11)
Rw 25: Ch 1, turn; 2 sc in next sc, sc in next sc, change to charcoal, sc in next 2 sc, change to red, sc in next 3 sc, change to charcoal, sc in next 2 sc, change to red, sc in next sc, 2 sc in next sc.  (13)
Rw 26: Ch 1, turn; 2 sc in next sc, sc in next sc, change to charcoal, sc in next 3 sc, change to red, sc in next 3 sc, change to charcoal, sc in next 3 sc, change to red, sc in next sc, 2 sc in next sc.  (15)
Rw 27: Ch 1, turn; sc in next 2 sc, change to charcoal, sc in next 3 sc, change to red, sc in next 5 sc, change to charcoal, sc in next 3 sc, change to red, sc in next 2 sc.  (15)
Rw 28: Ch 1, turn; sc in next sc, change to charcoal, sc in next 3 sc, change to red, sc in next 7 sc, change to charcoal, sc in next 3 sc, change to red, sc in next sc.  (15)  Change to charcoal.
LEFT SIDE:
Rw 29: Ch 1, turn; sc in next 2 sc, sc2tog, leaving remaining sc unworked.  (3)
Rw 30: Ch 1, turn; sc2tog, sc in next sc.  (2)
Finish off leaving a long tail.
RIGHT SIDE:
Rw 29: Attach charcoal in 4th sc from end, ch 1, working toward end, sc2tog, sc in next 2 sc.  (3)
Rw 30: Ch 1, turn; sc in next sc, sc2tog.  (2)
Finish off.  Weave in ends.

CHEST STAR:
Rd 1: With yellow, ch 5, 2 sc in second ch from hook, sc in next 2 ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 3 ch.  (10)
Rd 2: (3 sc in next sc, sc in next 4 sc) around.  (14)
Rd 3: slip st in next 4 sc, (ch 3, sc in second ch from hook, dc in next ch, skip next sc, slip st in first sc) 5 times.
Finish off leaving a long tail.  Sew CHEST STAR to BREASTPLATE.  Glue jewel on CHEST STAR.

SHOULDER WINGS:
Rw 1: With red, ch 2, 3 sc in second ch from hook.  (3)
Rw 2: Ch 1, turn; sc in each sc across.  (3)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next sc, 2 sc in next sc.  (5)
Rw 4: Ch 1, turn; sc in each sc across.  (5)
Rw 5: Ch 1, turn; 3 sc in next sc, sc in next 3 sc, 3 sc in next sc.  (9)
Rw 6: Ch 1, turn; sc in next 4 sc, 3 sc in next sc, sc in next 4 sc.  (11)
Rw 7: Ch 1, turn; sc in each sc across.  (11)
Rw 8: Ch 1, turn; 2 sc in next sc, change to gray, sc in next 9 sc, change to red, 2 sc in next sc.  (13)
Rw 9: Ch 1, turn; sc in next 2 sc, change to gray, sc in next 9 sc, change to red, sc in next 2 sc.  (13)
Rw 10: Ch 1, turn; 2 sc in next sc, sc in next 11 sc, 2 sc in next sc.  (15)
Rw 11: Ch 1, turn; sc in next 6 sc, sc3tog, sc in next 6 sc.  (13)
Finish off leaving a long tail.  Using gray, embroider French knots on gray area of SHOULDER WINGS.  Sew SHOULDER WINGS to BREASTPLATE.

BODY:
Rd 1: With charcoal, ch 2, 4 sc in second ch from hook working around ch, slip st in first sc changing to red.  (4)
Rd 2: Ch 1, sc in next sc, sc in next 10 sc on RIGHT LEG, change to charcoal, sc in next 2 sc, sc in next 2 sc on BODY, sc in next 2 sc on LEFT LEG, change to red, sc in next 10 sc, sc in next sc on BODY, slip st in first sc.  (28)
Rd 3: Ch 1, turn; sc in next 10 sc, change to charcoal, sc in next 8 sc, change to red, sc in next 10 sc, slip st in first sc.  (28)
Rd 4: Ch 1, turn; sc in next 9 sc, change to charcoal, sc in next 10 sc, change to red, sc in next 9 sc, slip st in first sc.  (28)
Rds 5-9: Ch 1, turn; sc in next 8 sc, change to charcoal, sc in next 12 sc, change to red, sc in next 8 sc, slip st in first sc.  (28)
Rds 10-11: Ch 1, turn; sc in next 8 sc, change to charcoal, sc in next 4 sc, change to gray, sc in next 4 sc, change to charcoal, sc in next 4 sc, change to red, sc in next 8 sc, slip st in first sc.  (28)
Rd 12: Ch 1, turn; sc in next 8 sc, change to charcoal, sc2tog, sc in next 2 sc, change to gray, sc in next 4 sc, change to charcoal, sc in next 2 sc, sc2tog, change to red, sc in next 8 sc, slip st in first sc.  (26)
Rd 13: Ch 1, turn; sc in next 8 sc, change to charcoal, sc2tog, sc in next sc, change to gray, sc in next sc, 2 sc in next sc, sc in next 2 sc, change to charcoal, sc in next sc, sc2tog, change to red, sc in next 8 sc, slip st in first sc.  (25)
Rds 14-18: Ch 1, turn; sc in next 8 sc, change to charcoal, sc in next 2 sc, change to gray, sc in next 5 sc, change to charcoal, sc in next 2 sc, change to red, sc in next 8 sc, slip st in first sc.  (25)
Rd 19: Ch 1, turn; sc in next 4 sc, 2 sc in next sc, sc in next 3 sc, change to charcoal, sc in next 2 sc, change to gray, sc in next 2 sc, 2 sc in next sc, sc in next 2 sc, change to charcoal, sc in next 2 sc, change to red, sc in next 3 sc, 2 sc in next sc, sc in next 4 sc, slip st in first sc.  (28)
Rd 20: Ch 1, turn; sc in next 8 sc, 2 sc in next sc, change to charcoal, sc in next 2 sc, change to gray, sc in next 6 sc, change to charcoal, sc in next 2 sc, change to red, 2 sc in next sc, sc in next 8 sc, slip st in first sc changing to white.  (30)
Rd 21: Ch 1, sc in each sc around.  (30)
Rd 22: sc in next 7 sc, holding marked st on RIGHT ARM together with next sc on BODY with right side toughing and working through both thicknesses, sc in next 2 sc, sc in next 13 on BODY, holding marked st on LEFT ARM together with next sc on BODY with right side toughing and working through both thicknesses, sc in next 2 sc, sc in next 6 sc.
Rd 23: sc in next 7 sc, sc in next 4 sc on ARM, sc in next 13 sc, sc in next 4 sc on ARM, sc in next 6 sc.  (42)
Rd 24: sc in each sc around.  (42)
Rd 25: sc in next 7 sc, (sc2tog) 4 times, sc in next 13 sc, (sc2tog) 4 times, sc in next 6 sc.  (34)
Rd 26: sc in next 5 sc, (sc2tog) 4 times, sc in next 9 sc, (sc2tog) 4 times, sc in next 4 sc.  (26)
Rd 27: sc in next 2 sc, (sc2tog) 5 times, sc in next 3 sc, (sc2tog) 5 times, sc in next sc.  (16)
Rd 28: (sc in next 2 sc, sc2tog) around.  (12)
Rd 29: (sc in next sc, sc2tog) around.  (8)
BEGIN STUFFING BODY FIRMLY.  CONTINUE STUFFING FIRMLY AS YOU GO ALONG.
Rd 30: sc in each sc around.  (8)
Rd 31: sc in next 3 sc, 2 sc in next 4 sc, sc in next sc.  (12)
Rd 32: sc in next 6 sc, 2 sc in next 4 sc, sc in next 2 sc.  (16)
Rd 33: (sc in next 3 sc, 2 sc in next sc) around.  (20)
THIS WOULD BE A GOOD TIME TO PLACE THE BREASTPLATE ON POWER RANGER.  IT WILL VERY DIFFICULT TO SLIP THE HEAD THROUGH THE NECK OPENING ON THE BREASTPLATE ONCE THE HEAD IS STUFFED AND CLOSED.
Rds 34-41:       sc in each sc around.  (20)
Rd 42: (sc in next 2 sc, sc2tog) around.  (15)
Rd 43: (sc in next sc, sc2tog) around.  (10)
Rd 44: sc2tog around.  (5)
Finish off with a long tail.  Add more stuffing to firmly achieve desired shape.  Weave tail through sc of Rd 44, pull tightly, and secure.  Weave in ends

BELT:
Rw 1: With gold, ch 33, sc in second ch from hook and in each ch across.  (32)
Rw 2: Ch 1, turn; sc in each sc across.  (32)
Finish off leaving a long tail.  Wrap around waist of RED POWER RANGER.  Sew together.  Tack stitch the BELT to BODY.  Weave in ends.

HIP PLATES (MAKE 2):
Rd 1: With red, ch 7, sc in second ch from hook, sc in next 4 ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 5 ch.  (13)
Rd 2: Ch 1, turn; sc in next 6 sc, 3 sc in next sc, sc in next 6 sc.  (15)
Finish off leaving a long tail.  Sew HIP PLATES to BELT.

HIP WRAP:
Rw 1: With red, ch 7, sc in second ch from hook and in each ch across.  (6)
Rws 2-3: Ch 1, turn; sc in each sc across.  (6)
Rw 4: Ch 1, turn; sc2tog, sc in next 2 sc, sc2tog.  (4)
Rws 5-7: Ch 1, turn; sc in each sc across.  (4)
Rw 8: Ch 1, turn; sc2tog, sc2tog.  (2)
Rws 9-16: Ch 1, turn; sc in each sc across.  (2)
Rw 17: Ch 1, turn; 2 sc in next 2 sc.  (4)
Rws 18-20: Ch 1, turn; sc in each sc across.  (4)
Rw 21: Ch 1, turn; 2 sc in next sc, sc in next 2 sc, 2 sc in next sc.  (6)
Rws 22-24: Ch 1, turn; sc in each sc across.  (6)
Finish off leaving a long tail.  Sew HIP WRAP to front and back of BELT.

HELMET:
Rd 1: With red, 6 sc in magic ring.  (6)
Rd 2: 2 sc in each sc around.  (12)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (18)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around.  (24)
Rd 5: slip st in next sc, ch 1, sc in each sc around, slip st in first sc.  (24)
Rd 6: Ch 1, turn; sc in each sc around, slip st in first sc.  (24)
Rd 7: Ch 1, turn; sc in next 6 sc, change to black, sc in next 4 sc, change to red, sc in next 4 sc, change to black, sc in next 4 sc, change to red, sc in next 6 sc, slip st in first sc.  (24)
Rd 8: Ch 1, turn; sc in next 6 sc, change to black, sc in next 12 sc, change to red, sc in next 6 sc, slip st in first sc.  (24)
Rd 9: Ch 1, turn; sc in next 6 sc, change to black, sc in next 2 sc, change to aqua, sc in next 2 sc, change to black, sc in next 4 sc, change to aqua, sc in next 2 sc, change to black, sc in next 2 sc, change to red, sc in next 6 sc, slip st in first sc.  (24)
Rd 10: Ch 1, turn; sc in next 6 sc, change to black, sc in next 12 sc, change to red, sc in next 6 sc, slip st in first sc.  (24)
Rd 11: Ch 1, turn; sc in next 7 sc, change to black, sc in next 10 sc, change to red, sc in next 7 sc, slip st in first sc.  (24)
Rd 12: Ch 1, turn; sc in next 10 sc, change to black, sc in next 4 sc, change to red, sc in next 10 sc, slip st in first sc.  (24)
Rds 13-14: Ch 1, turn; sc in next 10 sc, change to white, sc in next 4 sc, change to red, sc in next 10 sc, slip st in first sc.  (24)
Rd 15: Ch 1, turn; sc in next 11 sc, change to white, sc in next 2 sc, change to red, sc in next 11 sc, slip st in first sc.  (24)
Finish off leaving a long tail.  Weave in tail through sc of Rd 15, place HELMET on head of IRON STAR, pull tightly and secure.

FOREHEAD STAR POINTS (MAKE 5):
Rd 1: With yellow, ch 7, 2 sc in second ch from hook sc in next 4 ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 5 ch, slip st in first sc.  (14)
Finish off leaving a long tail.  Sew FOREHEAD STAR POINTS together.  Glue jewel in center of FOREHEAD STAR.  Sew FOREHEAD STAR to HELMET.

EAR MUFFS (MAKE 2):
Rd 1: With red, ch 2, 4 sc in second ch from hook working around ch, slip st in first sc changing to black.  (4)
Rd 2: Ch 1, 2 sc in each sc around, slip st in first sc.  (8)
Finish off leaving a long tail.  Using white, embroider ring around Rd 1.

HEAD BAND:
Rw 1: With black, ch 23, sc in second ch from hook and in each ch across.  (22)
Finish off leaving a long tail.  Sew HEAD BAND to HELMET.  Sew EAR MUFFS to HEAD BAND.

WINGS FRONT AND BACK (MAKE 4):
Rw 1: With black, ch 2, 2 sc in second ch from hook.  (2)
Rw 2: Ch 1, turn; sc in each sc across.  (2)
Rw 3: Ch 1, turn; sc in next sc, 2 sc in next sc.  (3)
Rw 4: Ch 1, turn; 2 sc in next sc, sc in next 2 sc.  (4)
Rw 5: Ch 1, turn; sc in each sc across.  (4)
Rw 6: Ch 1, turn; 2 sc in next sc, sc in next 3 sc.  (5)
Rw 7: Ch 1, turn; sc in next 4 sc, 2 sc in next sc.  (6)
Rw 8: Ch 1, turn; sc in each sc across.  (6)
Rw 9: Ch 1, turn; sc in next 5 sc, 2 sc in next sc.  (7)
Rw 10: Ch 1, turn; 2 sc in next sc, sc in next 6 sc.  (8)
Rw 11: Ch 1, turn; sc in each sc across.  (8)
Rw 12: Ch 1, turn; 2 sc in next sc, sc in next 7 sc.  (9)
Rw 13: Ch 1, turn; sc in next 8 sc, 2 sc in next sc.  (10)
Rw 14: Ch 1, turn; sc in each sc across.  (10)
Rw 15: Ch 1, turn; sc in next 9 sc, 2 sc in next sc.  (11)
Rw 16: Ch 1, turn; 2 sc in next sc, sc in next 10 sc.  (12)
Rw 17: Ch 1, turn; sc in each sc across.  (12)
Rw 18: Ch 1, turn; 2 sc in next sc, sc in next 11 sc.  (13)
Rw 19: Ch 1, turn; sc in next 12 sc, 2 sc in next sc.  (14)
Rw 20: Ch 1, turn; sc in each sc across.  (14)
Rw 21: Ch 1, turn; sc in next 13 sc, 2 sc in next sc.  (15)
Rw 22: Ch 1, turn; 2 sc in next sc, sc in next 14 sc.  (16)
Rw 23: Ch 1, turn; sc in each sc across.  (16)
Rw 24: Ch 1, turn; 2 sc in next sc, sc in next 15 sc.  (17)
Rw 25: Ch 1, turn; sc in next 16 sc, 2 sc in next sc.  (18)
Rw 26: Ch 1, turn; sc in each sc across.  (18)
Rw 27: Ch 1, turn; sc in next 17 sc, 2 sc in next sc.  (19)
Rw 28: Ch 1, turn; 2 sc in next sc, sc in next 18 sc.  (20)
Rws 29-34: Ch 1, turn; sc in each sc across.  (20)
Rw 35: Ch 1, turn; sc in next 4 sc, sc2tog, leaving remaining sc unworked.  (5)
Rw 36: Ch 1, turn; sc2tog, sc in next 3 sc.  (4)
Rw 37: Ch 1, turn; sc in next 2 sc, sc2tog.  (3)
Rw 38: Ch 1, turn; sc2tog, sc in next sc.  (2)
Rw 39: Ch 1, turn; sc2tog.  (1)
Finish off leaving a long tail.  Sew WINGS FRONT and BACK together along curved edge, leaving straight edge open.

WINGS ENDS (MAKE 2):
Rd 1: With black, ch 35, 2 sc in second ch from hook, sc in next 32 ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 33 ch.  (70)
Rd 2: (3 sc in next sc, sc in next 34 sc) around.  (74)
Rd 3: (sc in next sc, 3 sc in next sc, sc in next 35) around.  (78)
Finish off leaving a long tail.  Sew WINGS ENDS to WINGS FRONT AND BACK stuffing before closing.

WINGS SPIKES (MAKE 12):
Rd 1: With black, ch 9, sc in second ch from hook, sc in next 3 ch, hdc in next 3 ch, 4 hdc in next ch working around ch, working in free loops of foundation ch, hdc in next 3 ch, sc in next 4 ch, slip st in first sc.  (18)
Finish off leaving a long tail.  Sew WINGS SPIKES to WINGS.  Sew WINGS to IRON STAR.

Pokemon are copyright Nintendo and their respective creators.
Power Rangers are copyright Saban Entertainment and their respective creators.

This crochet pattern is an original pattern and is © by Christjan Bee (April 2018).  Please do not claim this pattern as your own.  If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site.  You may print and keep a copy for your own personal use but you may not sell or distribute it, or sell items made from this pattern.

WINGED KURIBOH

This is the next request from a Yu-Gi-Oh-obsessed customer of mine on Etsy.  This has been the easiest of the characters that she has requested.  The most difficult part of making Winged Kuriboh was finding the right technique to create his furry body.  If I can ever find a fuzzy brown yarn to use to make the body, I use it instead of fringing and trimming the fur.

MATERIALS:
Worsted weight yarn:  Coffee brown, black, white, and olive green.
E crochet hook
Polyester Fiberfil
Tapestry needle

BODY:
Rd 1: With coffee brown, 6 sc in magic ring.  (6)
Rd 2: 2 sc in each sc around.  (12)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (18)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around.  (24)
Rd 5: (sc in next 3 sc, 2 sc in next sc) around.  (30)
Rd 6: (sc in next 4 sc, 2 sc in next sc) around.  (36)
Rd 7: (sc in next 5 sc, 2 sc in next sc) around.  (42)
Rd 8: (sc in next 6 sc, 2 sc in next sc) around.  (48)
Rds 9-16: sc in each sc around.  (48)
Rd 17: (sc in next 6 sc, sc2tog) around.  (42)
Rd 18: (sc in next 5 sc, sc2tog) around.  (36)
Rd 19: (sc in next 4 sc, sc2tog) around.  (30)
Rd 20: (sc in next 3 sc, sc2tog) around.  (24)
Rd 21: (sc in next 2 sc, sc2tog) around.  (18)
Rd 22: (sc in next sc, sc2tog) around.  (12)
STUFF BODY FIRMLY.
Rd 23: sc2tog around.  (6)
Finish off leaving a long tail.  Weave tail through sc of Rd 23, pull tightly and secure.  Weave in ends.

FUR:
Cut and fringe on pieces of coffee brown around each stitch of BODY.  Trim FUR to desired length.

NAILS (MAKE 12):
Rd 1: With white, 6 sc in magic ring.  (6)
Rds 2-3: sc in each sc around.  (6)
Finish off.  Weave in ends.

ARMS (MAKE 2):
Rd 1: Attach olive green in first sc on NAIL #1, sc in same sc as attachment, sc in next 2 sc, sc in next 3 sc on NAIL #2, sc in next 6 sc on NAIL #3, sc in next 3 sc on NAIL #2, sc in next 3 sc on NAIL #1.  (18)
Rds 2-6: sc in each sc around.  (18)
Rd 7: (sc in next 2 sc, sc2tog) around.  (12)
BEGIN STUFFING ARMS FIRMLY.  CONTINUE STUFFING ARMS FIRMLY AS YOU GO ALONG.
Rd 8: (sc in next sc, sc2tog) around. (8)
Rds 9-11: sc in each sc around.  (8)
Finish off leaving a long tail.  Sew ARMS to BODY.

LEGS (MAKE 2):
Rd 1: Attach olive green in first sc on NAIL #1, sc in same sc as attachment, sc in next 2 sc, sc in next 3 sc on NAIL #2, sc in next 6 sc on NAIL #3, sc in next 3 sc on NAIL #2, sc in next 3 sc on NAIL #1.  (18)
Rds 2-7: sc in each sc around.  (18)
Rd 8: (sc in next 4 sc, sc2tog) around.  (15)
Rd 9: (sc in next 3 sc, sc2tog) around.  (12)
Finish off leaving a long tail.  Stuff LEGS firmly.  Sew LEGS to BODY.

EYES (MAKE 2):
Rd 1: With white, 6 sc in magic ring, slip st in first sc changing to black.  (6)
Rd 2: Ch 1, 2 sc in next sc, 3 sc in next 2 sc, change to buff, 2 sc in next sc, change to black, 3 sc in next 2 sc, slip st in first sc.  (16)
Rd 3: Ch 1, sc in next 3 sc, 2 sc in next sc, 2 hdc in next 2 sc, 2 sc in next sc, sc in next sc, change to buff, sc in next 2 sc, change to black, sc in next sc, 2 sc in next sc, 2 hdc in next 2 sc, 2 sc in next sc, sc in next sc, slip st in first sc changing to buff.  (24)
Rd 4: Ch 1, sc in next 4 sc, 2 sc in next sc, sc in next sc, 2 sc in next 2 sc, sc in next sc, 2 sc in next sc, sc in next 6 sc, 2 sc in next sc, sc in next sc, 2 sc in next 2 sc, sc in next sc, 2 sc in next sc, sc in next 2 sc, slip st in first sc.  (32)
Finish off leaving a long tail.  Sew EYES to BODY.

WING FEATHERS (MAKE 24):
Rd 1: With white, ch 6, sc in second ch from hook, sc in next 3 ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 4 ch.  (11)
Finish off.  Weave in ends.

WING BODY (MAKE 2):
Rw 1: With white, ch 7, sc in second ch from hook, sc in next 4 ch, 2 sc in next ch.  (7)
Rw 2: Ch 1, turn; 2 sc in next sc, sc in next 6 sc.  (8)
Rw 3: Ch 1, turn; sc in next 7 sc, 2 sc in next sc.  (9)
Rw 4: Ch 1, turn; holding next sc on WING BODY and working along straight edge of WING FEATHER together and working through both thicknesses, 2 sc in next sc, sc in next 2 sc, (holding next sc on WING BODY and working along straight edge of WING FEATHER together and working through both thicknesses, sc in next 3 sc) twice.  (10)
Rw 5: Ch 1, turn; sc in next 9 sc, 2 sc in next sc.  (11)
Rw 6: Ch 1, turn; 2 sc in next sc, sc in next 10 sc.  (12)
Rw 7: Ch 1, turn; (holding next sc on WING BODY and working along straight edge of WING FEATHER together and working through both thicknesses, sc in next 3 sc) 3 times, holding next sc on WING BODY and working along straight edge of WING FEATHER together and working through both thicknesses, sc in next 2 sc, 2 sc in next sc. (13)
Rw 8: Ch 1, turn; 2 sc in next sc, sc in next 12 sc.  (14)
Rw 9: Ch 1, turn; sc in next 13 sc, 2 sc in next sc.  (15)
Rw 10: Ch 1, turn; holding next sc on WING BODY and working along straight edge of WING FEATHER together and working through both thicknesses, 2 sc in next sc, sc in next 2 sc, (holding next sc on WING BODY and working along straight edge of WING FEATHER together and working through both thicknesses, sc in next 3 sc) 4 times.  (16)
Rw 11: Ch 1, turn; sc2tog, sc in next 13 sc, 2 sc in next sc.  (16)
Rw 12: Ch 1, turn; 2 sc in next sc, sc in next 13 sc, sc2tog.  (16)
Rw 13: Ch 1, turn; sc2tog, sc in next 13 sc, 2 sc in next sc.  (16)
Finish off leaving a long tail.

WING ARMS (MAKE 2):
Rd 1: With white, 6 sc in magic ring.  (6)
Rd 2: (sc in next 2 sc, 2 sc in next sc) around.  (8)
STUFF WING ARMS FIRMLY AS YOU GO ALONG.
Rds 3-46: sc in each sc around.  (8)
Finish off leaving a long tail.  Sew WING ARMS to WING BODY.  Sew WINGS to BODY.


Winged Kuriboh and Yu-Gi-Oh! are copyright Konami and their respective creators.

This crochet pattern is an original pattern and is © by Christjan Bee (April 2018).  Please do not claim this pattern as your own.  If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site.  You may print and keep a copy for your own personal use, but you may not sell or distribute it, or sell items made from this pattern.



SKULL TENNIS BALL COVER

My wife is working on a photography session that depicts a circus that has been corrupted by various monsters.  One of the characters is a juggler.  She asked if I could come up with a skull that the juggler could juggle.  This is the pattern for the skull tennis ball cover that I came up with.

MATERIALS:
Worsted weight yarn:  White and black
F crochet hook
Tapestry needle
Tennis Ball
2 black buttons

BALL COVER:
Rd 1: With white, 6 sc in magic ring.  (6)
Rd 2: 2 sc in each sc around.  (12)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (18)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around.  (24)
Rd 5: (sc in next 3 sc, 2 sc in next sc) around.  (30)
Rd 6: (sc in next 4 sc, 2 sc in next sc) around.  (36)
Rd 7: (sc in next 5 sc, 2 sc in next sc) around.  (42)
Rds 8-11: sc in each sc around.  (42)
Rd 12: (sc in next 5 sc, sc2tog) around.  (36)
Rd 13: (sc in next 4 sc, sc2tog) around.  (30)
THIS WOULD BE A GOOD TIME TO SEW ON THE BUTTONS AND EMBROIDER NOSE.
INSERT TENNIS BALL, WHILE HOLDING IN PLACE, CONTINUE TO CROCHET AROUND IT.  YOU MAY NEED TO PULL YOUR FINISHED WORK TIGHTLY TO GET IT TO COVER TO COMPLETELY.
Rd 14: (sc in next 3 sc, sc2tog) around.  (24)  Change to black.
Rd 15: Working in back loops only, (sc in next 2 sc, sc2tog) around.  (18)
Rd 16: (sc in next sc, sc2tog) around.  (12)
Rd 17: sc2tog around.  (6)
Finishing off leaving a long tail.  Weave tail through sc of Rd 17, pull tightly, and secure.  Weave in ends.

TEETH:
Rw 1: Count 7 sc from center of NOSE, attach white in 7th sc, ch 1, working toward NOSE, sc in next 14 sc.  (14)
Rw 2: Ch 1, turn; sc in next 14 sc.  (14)
Finish off.  Weave in ends.  Using black, embroider lines on TEETH.

This crochet pattern is an original pattern and is © by Christjan Bee (April 2018).  Please do not claim this pattern as your own.  If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site.  You may print and keep a copy for your own personal use, but you may not sell or distribute it, or sell items made from this pattern.



UNICORN BALLERINA

This is pattern for a Unicorn Ballerina.  This was a request from a customer on Etsy.  She sent me pictures of another Unicorn Ballerina that she saw online and asked if I could come up with one similar.  Of course, I could.  I can pretty much make anything.

MATERIALS:
Worsted weight yarn:  White, black, Spun Sugar Stripe (Hobby Lobby – I Love This Yarn), and gold.
E crochet hook
Polyester Fiberfil
Tapestry needle
Pink toole
Sewing needle
White sewing thread
15 mm safety eyes

HEAD:
Rd 1: With white, 6 sc in magic ring.  (6)
Rd 2: 2 sc in each sc around.  (12)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (18)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around.  (24)
Rd 5: (sc in next 3 sc, 2 sc in next sc) around.  (30)
Rd 6: (sc in next 4 sc, 2 sc in next sc) around.  (36)
Rds 7-12: sc in each sc around.  (36)
Rd 13: (sc in next 5 sc, 2 sc in next sc) around.  (42)
Rd 14: (sc in next 6 sc, 2 sc in next sc) around.  (48)
Rds 15-18: sc in each sc around.  (48)
ATTACH SAFETY EYES BETWEEN RDS 12 AND 13 WITH 7 SC BETWEEN EACH EYE.
Rd 19: (sc in next 6 sc, sc2tog) around.  (42)
Rd 20: (sc in next 5 sc, sc2tog) around.  (36)
Rd 21: (sc in next 4 sc, sc2tog) around.  (30)
Rd 22: (sc in next 3 sc, sc2tog) around.  (24)
Rd 23: (sc in next 2 sc, sc2tog) around.  (18)
Rd 24 (sc in next sc, sc2tog) around.  (12)
STUFF HEAD FIRMLY.
Rd 25: sc2tog around.  (6)
Finish off leaving a long tail.  Weave tail through sc of Rd 25, pull rightly and secure.  Weave in ends.  Using black, embroider eyelashes and nostrils on UNICORN BALLERINA.

HORN:
Rd 1: With gold, 6 sc in magic ring.  (6)
Rd 2: sc in each sc around.  (6)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (9)
Rds 4-5: sc in each sc around.  (9)
Rd 6: (sc in next 2 sc, 2 sc in next sc) around.  (12)
Rds 7-10: sc in each sc around.  (12)
Finish off leaving a long tail.  Stuff HORN firmly.   Sew HORN to HEAD.

STAR:
Rd 1: With spun sugar stripe, (sc, dc, ch 2, dc) 5 times in magic ring, slip st in first sc.
Finish off leaving a long tail.  Sew STAR to HORN.

EARS (MAKE 2):
Rd 1: With white, 6 sc in magic ring.  (6)
Rd 2: 2 sc in next 2 sc, (sc, hdc) in next sc, (hdc, sc) in next sc, 2 sc in next 2 sc.  (12)
Rd 3: sc in next 5 sc, (sc, hdc) in next sc, (hdc, sc) in next sc, sc in next 5 sc.  (14)
Finish off leaving a long tail.  Sew EARS to HEAD.

BODY:
Rd 1: With white, 6 sc in magic ring.  (6)
Rd 2: 2 sc in each sc around.  (12)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (18)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around.  (24)
Rd 5: (sc in next 3 sc, 2 sc in next sc) around.  (30)
Rd 6: (sc in next 4 sc, 2 sc in next sc) around.  (36)
Rd 7: (sc in next 5 sc, 2 sc in next sc) around.  (42)
Rds 8-20: sc in each sc around.  (42)
Rd 21: (sc in next 5 sc, sc2tog) around.  (36)
Rd 22: sc in each sc around.  (36)
Rd 23: (sc in next 4 sc, sc2tog) around.  (30)
Rd 24: sc in each sc around.  (30)
Rd 25: (sc in next 3 sc, sc2tog) around.  (24)
Rd 26: (sc in next 2 sc, sc2tog) around.  (18)
Rds 27-29: sc in each sc around.  (18)
Finish off leaving a long tail.  Stuff BODY firmly.  Sew BODY to HEAD.

ARMS AND LEGS (MAKE 4):
Rd 1: With spun sugar stripe, 6 sc in magic ring.  (6)
Rd 2: 2 sc in each sc around.  (12)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (18)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around.  (24)
Rds 5-8: sc in each sc around.  (24)
Rd 9: (sc in next 2 sc, sc2tog) around.  (18)
Rd 10: sc in each sc around.  (18)  Change to white.
Rds 11-20: sc in each sc around.  (18)
Rd 21: (sc in next sc, sc2tog) around.  (12)
STUFF ARMS FIRMLY.
Rd 22: sc2tog around.  (6)
Finish off leaving a long tail.  Weave tail through sc of Rd 22, pull tightly and secure.  Sew ARMS to BODY.

TUTU BAND:
Rw 1: With spun sugar stripe, ch
MAIN:
Using spun sugar stripe, fringe on pieces of yarn on back of head and down neck of UNICORN.

TAIL:
Using spun sugar stripe, fringe of pieces on yarn on BODY of UNICORN.

This crochet pattern is an original pattern and is © by Christjan Bee (April 2018).  Please do not claim this pattern as your own.  If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site.  You may print and keep a copy for your own personal use, but you may not sell or distribute it, or sell items made from this pattern.