PANTHERA FURY GTD

 

This is a car designed by my friend in Georgia. The background story of this car is that it was developed by the technology company run by Terrabyte. The car is a cross between a Toyota Supra and an Aston Martin Vantage GT3. The number and color marking were added to make the car look like it was an official car entered in the IMSA GTD class. D crochet hook is used for the structure of the car. B crochet hook is used for the claw door logos, number plates and position plates. Stuff the car firmly as you close it up.

MATERIALS:
Worsted weight yarn: Dark charcoal, black, white, spring green, flame, blue, red, lemon, and gray.
B and D crochet hooks
Polyester Fiberfil
Tapestry needle
Popsicle sticks
Wooden skewers
Toothpicks
Floral wire
Glue

BOTTOM:
Rw 1: With black, ch 21, 2 sc in second ch from hook, sc in next 18 ch, 2 sc in next ch. (22)
Rw 2: Ch 1, turn; 2 sc in next sc, sc in next 20 sc, 2 sc in next sc. (24)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next 22 sc, 2 sc in next sc. (26)
Rw 4: Ch 1, turn; 2 sc in next sc, sc in next 24 sc, 2 sc in next sc. (28)
Rw 5: Ch 1, turn; 2 sc in next sc, sc in next 26 sc, 2 sc in next sc. (30)
Rw 6: Ch 1, turn; 2 sc in next sc, sc in next 28 sc, 2 sc in next sc. (32)
Rw 7: Ch 1, turn; 2 sc in next sc, sc in next 30 sc, 2 sc in next sc. (34)
Rw 8: Ch 1, turn; 2 sc in next sc, sc in next 32 sc, 2 sc in next sc. (36)
Rws 9-12: Ch 1, turn; sc in each sc across. (36)
Rw 13: Ch 1, turn; slip st in next 6 sc, (slip st, ch 1, sc) in next sc, sc in next 23 sc, leaving remaining sc unworked. (24)
Rws 14-27: Ch 1, turn; sc in next 24 sc. (24)
Finish off.
Rw 28: Ch 6, sc in next 24 sc of Rw 27.
Rw 29: Ch 7, sc in second ch from hook, sc in next 5 ch, sc in next 24 sc, sc in next 6 ch. (36)
Rws 30-68: Ch 1, turn; sc in each sc across. (36)
Rw 69: Ch 1, turn; slip st in next 6 sc, (slip st, ch 1, sc) in next sc, sc in next 23 sc, leaving remaining sc unworked. (24)
Rws 70-83: Ch 1, turn; sc in next 24 sc. (24)
Finish off.
Rw 84: Ch 6, sc in next 24 sc of Rw 83. (24)
Rw 85: Ch 7, sc in second ch from hook, sc in next 5 ch, sc in next 24 sc, sc in next 6 ch. (36)
Rw 86: Ch 1, turn; sc in each sc across. (36)
Rw 87: Ch 1, turn; sc2tog, sc in next 32 sc, sc2tog. (34)
Rw 88: Ch 1, turn; sc2tog, sc in next 30 sc, sc2tog. (32)
Rw 89: Ch 1, turn; sc2tog, sc in next 28 sc, sc2tog. (30)
Rw 90: Ch 1, turn; sc2tog, sc in next 26 sc, sc2tog. (28)
Finish off. Weave in ends. Glue Popsicle sticks to BOTTOM to give it stability.

WHEELWELLS (MAKE 4):
Rw 1: With black, ch 9, 2 sc in second ch from hook sc in next 6 ch, 2 sc in next ch. (10)
Rw 2: Ch 1, turn; 2 sc in next sc, sc in next 8 sc, 2 sc in next sc. (12)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next 10 sc, 2 sc in next sc. (14)
Rw 4: Ch 1, turn; 2 sc in next sc, sc in next 12 sc, 2 sc in next sc. (16)
Rws 5-12: Ch 1, turn; sc in each sc across. (16)
Rd 13: Working in the side of Rws, ch 1, sc in next 12 sc, working in free loops of foundation ch, sc in next 8 ch, sc in next 12 Rws. (32)
Rds 14-18: Ch 1, turn; sc in each sc around. (32)
Finish off leaving a long tail. Sew WHEELWELLS to BOTTOM. Weave in ends.

TIRES (MAKE 4):
Rd 1: With spring green, 5 sc in magic ring, slip st in first sc. (5)
Rd 2: Ch 1, 2 sc in each sc around, slip st in first sc. (10)
Rd 3: Ch 1, turn; [sc in next sc, (sc, change to black, sc) in next sc, change to spring green) around, slip st in first sc changing to black. (15)
Rd 4: Ch 1, turn; (2 sc in next sc, change to spring green, sc in next 2 sc, change to black) around, slip st in first sc changing to spring green. (20)
Rd 5: Ch 1, turn; (sc in next 2 sc, change to black, sc in next sc, 2 sc in next sc, change to spring green) around, slip st in first sc. (25)
Rd 6: Ch 1, turn; (sc in next 4 sc, 2 sc in next sc) around, slip st in first sc changing to black. (30)
Rd 7: Ch 1, (sc in next 5 sc, 2 sc in next sc) around, slip st in first sc. (35)
Rd 8: Ch 1, (sc in next 6 sc, 2 sc in next sc) around, slip st in first sc. (40)
Rd 9: Ch 1, working in back loops only, sc in each sc around. (40)
Rds 10-14: sc in each sc around. (40)
Rd 15: Working in back loops only, (sc in next 6 sc, sc2tog) around. (35)
Rd 16: (sc in next 5 sc, sc2tog) around. (30)
Rd 17: (sc in next 4 sc, sc2tog) around. (25)
Rd 18: (sc in next 3 sc, sc2tog) around. (20)
Rd 19: (sc in next 2 sc, sc2tog) around. (15)
Rd 20: (sc in next sc, sc2tog) around. (10)
STUFF TIRES FIRMLY.
Rd 21: sc2tog around. (5)
Finish off leaving a long tail. OPTIONAL: Glue dowel to TIRES through opening in Rd 21. Weave tail through sc of Rd 21, pull tightly and secure. Sew TIRES to WHEELWELL BACK. OPTIONAL: Use buttons to attach TIRES so that they can turn.

FRONT:
Rw 1: Attach dark charcoal in the side of Rw 12 of BOTTOM, ch 1, sc in same Rw as attachment, sc in next 12 Rws, working in free loops of foundation ch, sc in next 20 ch, working in the side of Rws, sc in next 12 Rws. (44)
Rw 2: Ch 1, turn; sc in each sc across. (44)
LEFT FRONT:
Rw 3: Ch 1, turn; sc in next 5 sc, sc2tog. (6)
Rw 4: Ch 1, turn; sc2tog, sc in next 4 sc. (5)
Rw 5: Ch 1, turn; sc in next 3 sc, sc2tog. (4)
Rws 6-8: Ch 1, turn; sc in each sc across. (4)
Rw 9: Ch 1, turn; 2 sc in next sc, sc in next 3 sc. (5)
Rw 10: Ch 1, turn; sc2tog, sc in next 2 sc, 2 sc in next sc. (5)
Rw 11: Ch 1, turn; 2 sc in next sc, sc in next 2 sc, sc2tog. (5)
Rw 12: Ch 1, turn; sc2tog, sc in next 2 sc, 2 sc in next sc. (5)
Finish off leaving a long tail.
LEFT GRILL POST:
Rw 3: Skip next 4 sc, attach dark charcoal in next sc, ch 1, sc together same sc as attachment and in next sc, sc2tog. (2)
Rws 4-8: Ch 1, turn; sc in each sc across. (2)
Finish off leaving a long tail.
RIGHT GRILL POST:
Rw 3: Skip next 14 sc, attach dark charcoal in next sc, ch 1, sc together same sc as attachment and in next sc, sc2tog. (2)
Rws 4-8: Ch 1, turn; sc in each sc across. (2)
Finish off leaving a long tail.
RIGHT FRONT:
Rw 3: With the wrong side facing, attach dark charcoal in first sc, ch 1, sc in same sc as attachment, sc in next 4 sc, sc2tog. (6)
Rw 4: Ch 1, turn; sc2tog, sc in next 4 sc. (5)
Rw 5: Ch 1, turn; sc in next 3 sc, sc2tog. (4)
Rws 6-8: Ch 1, turn; sc in each sc across. (4)
Rw 9: Ch 1, turn; 2 sc in next sc, sc in next 3 sc. (5)
Rw 10: Ch 1, turn; sc2tog, sc in next 2 sc, 2 sc in next sc. (5)
Rw 11: Ch 1, turn; 2 sc in next sc, sc in next 2 sc, sc2tog. (5)
Rw 12: Ch 1, turn; sc2tog, sc in next 2 sc, 2 sc in next sc. (5)
Finish off leaving a long tail. Sew RIGHT FRONT and LEFT FRONT to WHEELWELLS. Weave in ends.

FRONT GRILL SUPPORT:
Rw 1: Working over sc one st behind FRONT, attach dark charcoal in Rw 12, ch 1, sc over same Rw as attachment, sc over next 10 Rw, working over sc of Rw 2, sc over next 24 sc, sc over one st behind FRONT, sc over next 11 Rws. (46)
Rw 2: Ch 1, turn; sc in each sc across. (46)
LEFT FRONT:
Rw 3: Ch 1, turn; sc in next 5 sc, sc2tog. (6)
Rw 4: Ch 1, turn; sc2tog, sc in next 4 sc. (5)
Rw 5: Ch 1, turn; sc in next 3 sc, sc2tog. (4)
Rws 6-8: Ch 1, turn; sc in each sc across. (4)
Rw 9: Ch 1, turn; 2 sc in next sc, sc in next 3 sc. (5)
Rw 10: Ch 1, turn; sc2tog, sc in next 2 sc, 2 sc in next sc. (5)
Rw 11: Ch 1, turn; 2 sc in next sc, sc in next 2 sc, sc2tog. (5)
Rw 12: Ch 1, turn; sc2tog, sc in next 2 sc, 2 sc in next sc. (5)
Finish off leaving a long tail.
LEFT GRILL POST:
Rw 3: Skip next 4 sc, attach dark charcoal in next sc, ch 1, sc together same sc as attachment and in next sc, sc2tog. (2)
Rws 4-8: Ch 1, turn; sc in each sc across. (2)
Finish off leaving a long tail.
RIGHT GRILL POST:
Rw 3: Skip next 14 sc, attach dark charcoal in next sc, ch 1, sc together same sc as attachment and in next sc, sc2tog. (2)
Rws 4-8: Ch 1, turn; sc in each sc across. (2)
Finish off leaving a long tail.
RIGHT FRONT:
Rw 3: With the wrong side facing, attach dark charcoal in first sc, ch 1, sc in same sc as attachment, sc in next 4 sc, sc2tog. (6)
Rw 4: Ch 1, turn; sc2tog, sc in next 4 sc. (5)
Rw 5: Ch 1, turn; sc in next 3 sc, sc2tog. (4)
Rws 6-8: Ch 1, turn; sc in each sc across. (4)
Rw 9: Ch 1, turn; 2 sc in next sc, sc in next 3 sc. (5)
Rw 10: Ch 1, turn; sc2tog, sc in next 2 sc, 2 sc in next sc. (5)
Rw 11: Ch 1, turn; 2 sc in next sc, sc in next 2 sc, sc2tog. (5)
Rw 12: Ch 1, turn; sc2tog, sc in next 2 sc, 2 sc in next sc. (5)
Finish off leaving a long tail. Sew RIGHT FRONT and LEFT FRONT to WHEELWELLS. Weave in ends.

GRILL:
Rw 1: Working over sc one st behind FRONT GRILL SUPPORT, attach black in Rw 12, ch 1, sc in same Rw as attachment, sc over next 9 Rws, working over sc of Rw 3, sc over next 22 sc, sc over one st behind FRONT GRILL SUPPORT, sc over next 10 Rws. (42)
Rws 2-8: Ch 1, turn; sc in each sc across. (42)
Finish off leaving a long tail. Sew GRILL to WHEELWELLS just like FRONT and FRONT GRILL SUPPORT. Sew FRONT and FRONT GRILL SUPPORT to GRILL. Weave in ends.

BACK:
Rw 1: Attach dark charcoal in the side of Rw 85, ch 1, sc in same Rw as attachment, sc in next 5 Rws, working in sc of Rw 90, change to black, sc in next 28 sc, change to dark charcoal, working in the side of Rws, sc in next 6 Rws. (40)
Rw 2: Ch 1, turn; sc in next 7 sc, change to black, sc in next 2 sc, change to dark charcoal, sc in next 2 sc, change to black, sc in next sc, change to dark charcoal, sc in next 2 sc, change to black, sc in next 12 sc, change to dark charcoal, sc in next 2 sc, change to black, sc in next sc, change to dark charcoal, sc in next 2 sc, change to black, sc in next 2 sc, change to dark charcoal, sc in next 7 sc. (40)
Rw 3: Ch 1, turn; sc in next 8 sc, change to black, sc in next sc, change to dark charcoal, sc in next 2 sc, change to black, sc in next sc, change to dark charcoal, sc in next 2 sc, change to black, sc in next 2 sc, change to dark charcoal, sc in next 8 sc, change to black, sc in next 2 sc, change to dark charcoal, sc in next 2 sc, change to black, sc in next sc, change to dark charcoal, sc in next 2 sc, change to black, sc in next sc, change to dark charcoal, sc in next 8 sc. (40)
Rw 4: Ch 1, turn; sc in next 9 sc, change to black, sc in next 6 sc, change to dark charcoal, sc in next 10 sc, change to black, sc in next 6 sc, change to dark charcoal, sc in next 9 sc. (40)
Rws 5-7: Ch 1, turn; sc in each sc across. (40)
Rw 8: Ch 1, turn; sc in next 8 sc, change to black, sc in next 24 sc, change to dark charcoal, sc in next 8 sc. (40)
Rw 9: Ch 1, turn; 2 sc in next sc, sc in next 6 sc, change to black, sc in next sc, change to orange, sc in next 6 sc, change to black, sc in next 12 sc, change to orange, sc in next 6 sc, change to black, sc in next sc, change to dark charcoal, sc in next 6 sc, 2 sc in next sc. (42)
Rw 10: Ch 1, turn; 2 sc in next sc, sc in next 6 sc, change to black, sc in next sc, change to orange, sc in next 6 sc, change to black, sc in next 14 sc, change to orange, sc in next 6 sc, change to black, sc in next sc, change to dark charcoal, sc in next 6 sc, 2 sc in next sc. (44)
Rw 11: Ch 1, turn; 2 sc in next sc, sc in next 6 sc, change to black, sc in next 30 sc, change to dark charcoal, sc in next 6 sc, 2 sc in next sc. (46)
Rw 12: Ch 1, turn; 2 sc in next sc, sc in next 44 sc, 2 sc in next sc. (48)
Finish off leaving a long tail. Sew THE SIDE OF Rws to WHEELWELLS. Weave in ends.

FRONT WHEELWELL COVERS (MAKE 2):
Rw 1: With dark charcoal, ch 13, sc in second ch from hook and in each ch across. (12)
Rws 2-3: Ch 1, turn; sc in each sc across. (12)
Finish off leaving a long tail. Sew FRONT WHEELWELL COVERS to WHEELWELLS. Weave in ends.

DRIVER’S SIDE:
Rw 1: Attach black in the side of Rw 78 and working toward the FRONT, ch 1, sc in same Rw as attachment, sc in next sc, working 1 sc from the side of Rws, change to dark charcoal, sc over next 2 Rws, change to black, working 2 sc from the side of Rws, sc over next 2 Rws, working 3 sc from the side of Rws, sc over next 34 Rws. (40)
Rw 2: Ch 1, turn; sc in next 36 sc, change to dark charcoal, sc in next 2 sc, change to black, sc in next 2 sc. (40)
Rw 3: Ch 1, turn; sc in next 5 sc, change to dark charcoal, sc in next 35 sc. (40)
Rws 4-8: Ch 1, turn; sc in each sc across. (40)
Rw 9: Ch 1, turn; 2 sc in next sc, sc in next 38 sc, 2 sc in next sc. (42)
Rw 10: Ch 1, turn; 2 sc in next sc, sc in next 40 sc, 2 sc in next sc. (44)
Rw 11: Ch 1, turn; 2 sc in next sc, sc in next 42 sc, 2 sc in next sc. (46)
Rw 12: Ch 1, turn; 2 sc in next sc, sc in next 44 sc, 2 sc in next sc. (48)
Finish off leaving a long tail. Sew the side of Rws to WHEELWELL. Weave in ends.

PASSENGER’S SIDE:
Rw 1: Attach black in the side of Rw 78 and working toward the FRONT, ch 1, sc in same Rw as attachment, sc in next sc, working 1 sc from the side of Rws, change to dark charcoal, sc over next 2 Rws, change to black, working 2 sc from the side of Rws, sc over next 2 Rws, working 3 sc from the side of Rws, sc over next 34 Rws. (40)
Rw 2: Ch 1, turn; sc in next 36 sc, change to dark charcoal, sc in next 2 sc, change to black, sc in next 2 sc. (40)
Rw 3: Ch 1, turn; sc in next 5 sc, change to dark charcoal, sc in next 35 sc. (40)
Rws 4-8: Ch 1, turn; sc in each sc across. (40)
Rw 9: Ch 1, turn; 2 sc in next sc, sc in next 38 sc, 2 sc in next sc. (42)
Rw 10: Ch 1, turn; 2 sc in next sc, sc in next 40 sc, 2 sc in next sc. (44)
Rw 11: Ch 1, turn; 2 sc in next sc, sc in next 42 sc, 2 sc in next sc. (46)
Rw 12: Ch 1, turn; 2 sc in next sc, sc in next 44 sc, 2 sc in next sc. (48)
Finish off leaving a long tail. Sew the side of Rws to WHEELWELL. Weave in ends.

REAR QUARTER PANELS (MAKE 2):
Rw 1: With dark charcoal, ch 2, sc in second ch from hook. (1)
Rw 2: Ch 1, turn; sc in each sc across. (1)
Rw 3: Ch 1, turn; 2 sc in next sc. (2)
Rw 4: Ch 1, turn; sc in each sc across. (2)
Rw 5: Ch 1, turn; 2 sc in next 2 sc. (4)
Rw 6: Ch 1, turn; sc in each sc across. (4)
Rw 7: Ch 1, turn; sc in next 3 sc, 2 sc in next sc. (5)
Rw 8: Ch 1, turn; sc in each sc across. (5)
Rw 9: Ch 1, turn; sc in next 4 sc, 2 sc in next sc. (6)
Rw 10: Ch 1, turn; sc in each sc across. (6)
Rw 11: Ch 1, turn; 2 sc in next sc, sc in next 5 sc. (7)
Rw 12: Ch 1, turn; sc in each sc across. (7)
Rw 13: Ch 1, turn; sc in next sc, 2 sc in next sc, sc in next 5 sc. (8)
Rws 14-18: Ch 1., turn; sc in each sc across. (8)
Rw 19: Ch 1, turn; sc in next sc, sc2tog, sc in next 5 sc. (7)
Rw 20: Ch 1, turn; sc in each sc across. (7)
Rw 21: Ch 1, turn; sc2tog, sc in next 5 sc. (6)
Rws 22-24: Ch 1, turn; sc in each sc across. (6)
Rw 25: Ch 1, turn; sc2tog, sc in next 4 sc. (5)
Rw 26: Ch 1, turn; sc in next 3 sc, sc2tog. (4)
Rw 27: Ch 1, turn; sc2tog, sc in next 2 sc. (3)
Rw 28: Ch 1, turn; sc in next sc, sc2tog. (2)
Finish off leaving a long tail. Sew REAR QUARTER PANELS to BACK, WHEELWELLS, and DRIVER’S SIDE or PASSENGER’S SIDE. Weave in ends.

REAR DECK LID:
Rw 1: Working in unused sc of BACK attach dark charcoal in first unused sc, ch 1, sc in same sc as attachment, sc in next 23 sc. (24)
Finish off leaving a long tail. Sew READ DECK LID to REAR QUARTER PANELS. Weave in ends. To add stability to the READ DECK LID for when the spoiler is attached, glue popsicle sticks to underside of REAR DECK LID and QUARTER PANELS.

DRIVER’S SIDE WINDOW:
Rw 1: Attach dark charcoal in the side of Rw 2 of REAR QUARTER PANEL and working toward FRONT, ch 1, sc in same sc as attachment, sc in next Rw of REAR QUARTER PANEL, sc in next 32 sc on DRIVER’S SIDE, sc2tog. (35)
Rw 2: Ch 1, turn; sc2tog, sc in next sc, change to black, sc in next 30 sc, change to dark charcoal, sc in next 2 sc, sc in the side of next 2 Rws on REAR QUARTER PANEL. (36)
Finish off. Weave in ends.
Rw 3: Attach dark charcoal in the side of Rw 20 of REAR QUARTER PANEL and working toward FRONT, ch 1, sc in same sc as attachment, sc in next 15 Rws, sc in next 4 sc of Rw 2, change to black, sc in next 29 sc, change to dark charcoal, sc in next sc, sc2tog. (51)
Rw 4: Ch 1, turn; sc3tog, sc in next sc, change to black, sc in next 27 sc, change to dark charcoal, sc in next sc, change to black, sc in next 3 sc, change to dark charcoal, sc in next 12 sc, sc2tog. (46)
Rw 5: Ch 1, turn; slip st in next sc, sc2tog, sc in next 5 sc, change to black, sc in next 8 sc, change to dark charcoal, sc in next sc, change to black, sc in next 26 sc, change to dark charcoal, sc in next sc, sc2tog. (43)
Rw 6: Ch 1, turn; sc2tog, sc in next sc, change to black, sc in next 25 sc, change to dark charcoal, sc in next sc, change to black, sc in next 10 sc, change to dark charcoal, sc in next sc, sc2tog. (40)
Rw 7: Ch 1, turn; slip st in next sc, sc2tog, sc in next sc, change to black, sc in next 8 sc, change to dark charcoal, sc in next sc, change to black, sc in next 24 sc, change to dark charcoal, sc in next sc, sc2tog. (37)
Rw 8: Ch 1, turn; sc3tog, sc in next sc, change to black, sc in next 22 sc, change to dark charcoal, sc in next sc, change to black, sc in next 6 sc, change to dark charcoal, sc in next sc, sc2tog. (33)
Rw 9: Ch 1, turn; slip st in next sc, sc2tog, sc in next sc, change to black, sc in next 4 sc, change to dark charcoal, sc in next sc, change to black, sc in next 21 sc, change to dark charcoal, sc in next sc, sc3tog. (30)
Rw 10: Ch 1, turn; sc2tog, sc in next 25 sc, sc2tog. (27)
Finish off. using black, embroider door outline on DRIVER’S SIDE. Weave in ends.

PASSENGER’S SIDE WINDOW:
Rw 1: Attach dark charcoal in the side of Rw 2 of REAR QUARTER PANEL and working toward FRONT, ch 1, sc in same sc as attachment, sc in next Rw of REAR QUARTER PANEL, sc in next 32 sc on PASSENGER’S SIDE, sc2tog. (35)
Rw 2: Ch 1, turn; sc2tog, sc in next sc, change to black, sc in next 30 sc, change to dark charcoal, sc in next 2 sc, sc in the side of next 2 Rws on REAR QUARTER PANEL. (36)
Finish off. Weave in ends.
Rw 3: Attach dark charcoal in the side of Rw 20 of REAR QUARTER PANEL and working toward FRONT, ch 1, sc in same sc as attachment, sc in next 15 Rws, sc in next 4 sc of Rw 2, change to black, sc in next 29 sc, change to dark charcoal, sc in next sc, sc2tog. (51)
Rw 4: Ch 1, turn; sc3tog, sc in next sc, change to black, sc in next 27 sc, change to dark charcoal, sc in next sc, change to black, sc in next 3 sc, change to dark charcoal, sc in next 12 sc, sc2tog. (46)
Rw 5: Ch 1, turn; slip st in next sc, sc2tog, sc in next 5 sc, change to black, sc in next 8 sc, change to dark charcoal, sc in next sc, change to black, sc in next 26 sc, change to dark charcoal, sc in next sc, sc2tog. (43)
Rw 6: Ch 1, turn; sc2tog, sc in next sc, change to black, sc in next 25 sc, change to dark charcoal, sc in next sc, change to black, sc in next 10 sc, change to dark charcoal, sc in next sc, sc2tog. (40)
Rw 7: Ch 1, turn; slip st in next sc, sc2tog, sc in next sc, change to black, sc in next 8 sc, change to dark charcoal, sc in next sc, change to black, sc in next 24 sc, change to dark charcoal, sc in next sc, sc2tog. (37)
Rw 8: Ch 1, turn; sc3tog, sc in next sc, change to black, sc in next 22 sc, change to dark charcoal, sc in next sc, change to black, sc in next 6 sc, change to dark charcoal, sc in next sc, sc2tog. (33)
Rw 9: Ch 1, turn; slip st in next sc, sc2tog, sc in next sc, change to black, sc in next 4 sc, change to dark charcoal, sc in next sc, change to black, sc in next 21 sc, change to dark charcoal, sc in next sc, sc3tog. (30)
Rw 10: Ch 1, turn; sc2tog, sc in next 25 sc, sc2tog. (27)
Finish off. Using black, embroider door outline on PASSENGER’S SIDE. Weave in ends.

CLAW DOOR LOGOS (MAKE 2):

Rw 1: With dark charcoal and B crochet hook, ch 11, sc in second ch from hook and in each ch across. (10)
Rw 2: Ch 1, turn; sc in next sc, change to gray, sc in next 3 sc, change to dark charcoal, sc in next 2 sc, change to gray, sc in next 3 sc, change to dark charcoal, sc in next sc. (10)
Rws 3-4: Ch 1, turn; sc in next sc, change to gray, sc in next 8 sc, change to dark charcoal, sc in next sc. (10)
Rw 5: Ch 1, turn; sc in next 2 sc, change to gray, sc in next 6 sc, change to dark charcoal, sc in next 2 sc. (10)
Rw 6: Ch 1, turn; sc in next 3 sc, change to gray, sc in next 4 sc, change to dark charcoal, sc in next 3 sc. (10)
Rw 7: Ch 1, turn; sc in next sc, change to gray, sc in next sc, change to dark charcoal, sc in next 6 sc, change to gray, sc in next sc, change to dark charcoal, sc in next sc. (10)
Rw 8: Ch 1, turn; sc in next sc, change to gray, sc in next sc, change to dark charcoal, sc in next sc, change to gray, sc in next sc, change to dark charcoal, sc in next 2 sc, change to gray, sc in next sc, change to dark charcoal, sc in next sc, change to gray, sc in next sc, change to dark charcoal, sc in next sc. (10)
Rw 9: Ch 1, turn; sc in next 3 sc, change to gray, sc in next sc, change to dark charcoal, sc in next 2 sc, change to gray, sc in next sc, change to dark charcoal, sc in next 3 sc. (10)
Rw 10: Ch 1, turn; sc in each sc across. (10)
Finish off leaving a long tail. Using black and the graph as a guide, embroider markings on CLAW DOOR LOGOS. Sew CLAW DOOR LOGOS to DRIVER’S SIDE and PASSENGER’S SIDE. Weave in ends.

HOOD:
Rw 1: With dark charcoal, ch 21, 2 sc in second ch from hook, sc in next 3 ch, change to spring green, sc in next 5 ch, change to dark charcoal, sc in next 2 sc, change to spring green, sc in next 5 ch, change to dark charcoal, sc in next 3 ch, 2 sc in next ch. (22)
Rw 2: Ch 1, turn; 2 sc in next sc, sc in next 4 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 4 sc, 2 sc in next sc. (24)
Rw 3: Ch 1, turn; 2 sc in next sc, change to gray, sc in next sc, change to white, sc in next sc, change to dark charcoal, sc in next 3 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 3 sc, change to white, sc in next sc, change to gray, sc in next sc, change to dark charcoal, 2 sc in next sc. (26)
Rw 4: Ch 1, turn; 2 sc in next sc, change to gray, sc in next sc, change to white, sc in next sc, change to dark charcoal, sc in next 4 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 4 sc, change to white, sc in next sc, change to gray, sc in next sc, change to dark charcoal, 2 sc in next sc. (28)
Rw 5: Ch 1, turn; 2 sc in next sc, change to gray, sc in next sc, change to white, sc in next sc, change to dark charcoal, sc in next 5 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 5 sc, change to white, sc in next sc, change to gray, sc in next sc, change to dark charcoal, 2 sc in next sc. (30)
Rw 6: Ch 1, turn; Ch 1, turn; 2 sc in next sc, change to gray, sc in next sc, change to white, sc in next sc, change to dark charcoal, sc in next 6 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 6 sc, change to white, sc in next sc, change to gray, sc in next sc, change to dark charcoal, 2 sc in next sc. (32)
Rw 7: Ch 1, turn; 2 sc in next sc, change to white, sc in next 3 sc, change to dark charcoal, sc in next 6 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 6 sc, change to white, sc in next 3 sc, change to dark charcoal, 2 sc in next sc. (34)
Rw 8: Ch 1, turn; 2 sc in next sc, change to white, sc in next sc, change to gray, sc in next 3 sc, change to dark charcoal, sc in next 6 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 6 sc, change to gray, sc in next 3 sc, change to white, sc in next sc, change to dark charcoal, 2 sc in next sc. (36)
Rws 9-11: Ch 1, turn; sc in next 2 sc, change to white, sc in next sc, change to gray, sc in next sc, change to white, sc in next 2 sc, change to dark charcoal, sc in next 6 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 6 sc, change to white, sc in next 2 sc, change to gray, sc in next sc, change to white, sc in next sc, change to dark charcoal, sc in next 2 sc. (36)
LEFT SIDE:
Rw 12: Ch 1, turn; sc in next 3 sc, change to white, sc in next sc, change to dark charcoal, sc in next 3 sc, sc2tog. (8)
Rw 13: Ch 1, turn; sc2tog, sc in next 6 sc. (7)
Rw 14: Ch 1, turn; sc in next 5 sc, sc2tog. (6)
Rw 15: Ch 1, turn; sc2tog, sc in next 4 sc. (5)
Rws 16-19: Ch 1, turn; sc in each sc across. (5)
Finish off. Weave in ends.
CENTER:
Rw 12: Skip next sc, attach dark charcoal in next sc, ch 1, sc in same sc as attachment, sc in next sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc. (16)
Rws 13-19: Ch 1, turn; sc in next 2 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc. (16)
Finish off. Weave in ends.
RIGHT SIDE:
Rw 12: Skip next sc, attach dark charcoal in next sc, ch 1, sc together same sc as attachment and next sc, sc in next 3 sc, change to white, sc in next sc, change to dark charcoal, sc in next 3 sc. (8)
Rw 13: Ch 1, turn; sc in next 6 sc, sc2tog. (7)
Rw 14: Ch 1, turn; sc2tog, sc in next 5 sc. (6)
Rw 15: Ch 1, turn; sc in next 4 sc, sc2tog. (5)
Rws 16-19: Ch 1, turn; sc in each sc across. (5)
Finish off. Weave in ends.
HOOD TOP:
Rw 20: Attach dark charcoal in first sc of LEFT SIDE, ch 1, sc in same sc as attachment, sc in next 4 sc, ch 5, sc in next 2 sc on CENTER, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc, ch 5, sc in next 5 sc on RIGHT SIDE.
Rw 21: Ch 1, turn; sc in next 5 sc, sc in next 5 ch, sc in next 2 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc, sc in next 5 ch, sc in next 5 sc. (36)
Rws 22-28: Ch 1, turn; sc in next 12 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 12 sc. (36)
Finish off leaving a long tail. Once the HOOD VENTS are attached, sew HOOD to PANTHERA FURY GT. Using gray, embroider T Bone logo on HOOD. Weave in ends.

HOOD VENTS (MAKE 2):
Rw 1: With black, ch 8, sc in second ch from hook and in each ch across. (7)
Rws 2-11: Ch 1, turn; sc in each sc across. (7)
Finish off. Weave in ends. Sew HOOD VENTS to HOOD. Weave in ends.

WINDSHIELD, TOP AND BACK WINDOW:
Rw 1: With dark charcoal, ch 31, sc in second ch from hook, change to black, sc in next 28 sc, change to dark charcoal, sc in next sc. (30)
Rws 2-6: Ch 1, turn; sc in next sc, change to black, sc in next 28 sc, change to dark charcoal, sc in next sc. (30)
Rw 7: Ch 1, turn; sc in next sc, change to black, sc2tog, sc in next 24 sc, sc2tog, change to dark charcoal, sc in next sc. (28)
Rw 8: Ch 1, turn; sc in next sc, change to black, sc in next 26 sc, change to dark charcoal, sc in next sc. (28)
Rws 9-12: Ch 1, turn; sc in next sc, change to spring green, sc in next 2 sc, change to white, sc in next 22 sc, change to spring green, sc in next 2 sc, change to dark charcoal, sc in next sc. (28)
Rws 13-21: Ch 1, turn; sc in next 8 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 8 sc. (28)
Rw 22: Ch 1, turn; sc in next sc, sc2tog, sc in next 5 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 5 sc, sc2tog, sc in next sc. (26)
Rws 23-30: Ch 1, turn; sc in next 7 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 7 sc. (26)
Rw 31: Ch 1, turn; sc in next sc, sc2tog, sc in next 4 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 4 sc, sc2tog, sc in next sc. (24)
Rws 32-39: Ch 1, turn; sc in next 6 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 2 sc, change to spring green, sc in next 5 sc, change to dark charcoal, sc in next 6 sc. (24)
Rws 40-.50: Ch 1, turn; sc in next sc, change to black, sc in next 22 sc, change to dark charcoal, sc in next sc. (24)
Rw 51: Ch 1, turn; 2 sc in next sc, change to black, sc2tog, sc in next 18 sc, sc2tog, change to dark charcoal, 2 sc in next sc. (24)
Rws 52-53: Ch 1, turn; sc in next 2 sc, change to black, sc in next 20 sc, change to dark charcoal, sc in next 2 sc. (24)
Rw 54: Ch 1, turn; sc in next sc, 2 sc in next sc, change to black, sc2tog, sc in next 16 sc, sc2tog, change to dark charcoal, 2 sc in next sc, sc in next sc. (24)
Rw 55: Ch 1, turn; sc in next 3 sc, change to black, sc in next 18 sc, change to dark charcoal, sc in next 3 sc. (24)
Finish off leaving a long tail. Using black, embroider PANTERA FURY on white section of WINDSHIELD. Sew WINDSHIELD, TOP, AND BACK WINDOW to BODY stuffing before closing. Weave in ends.

MIRRORS (MAKE 2):
Rd 1: With spring green, ch 2, 4 sc in second ch from hook working around ch. (4)
Rd 2: (sc in next sc, 2 sc in next sc) around. (6)
Rd 3: (sc in next 2 sc, 2 sc in next sc) around. (8)
Rd 4: (sc in next 3 sc, 2 sc in next sc) around. (10)
Rds 5-6: sc in each sc around. (10)
Finish off leaving a long tail. Sew MIRRORS to DRIVER’S WINDOW and PASSENGER’S WINDOW stuffing before closing. Weave in ends.

SPOILER (MAKE 2):
Rw 1: With dark charcoal, ch 37, sc in second ch from hook and in each ch across. (36)
Rws 2-6: Ch 1, turn; sc in each sc across. (36)
Finish off leaving a long tail.

SPOILER END PLATES (MAKE 4):
Rw 1: With spring green, ch 9, sc in second ch from hook and in each ch across. (8)
Rws 2-5: Ch 1, turn; sc in each sc across. (8)
Finish off leaving a long tail. Sew 2 SPOILER END PLATES together. Sew SPOILER END PLATES to each end of SPOILER. Weave in ends.

SPOILER SUPPORTS (MAKE 4):
Rw 1: With dark charcoal, ch 7, sc in second ch from hook and in each ch across. (6)
Rw 2: Ch 1, turn; sc in each sc across. (6)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next 3 sc, sc2tog. (6)
Rws 4-5: Ch 1, turn; sc in each sc across. (6)
Rw 6: Ch 1, turn; sc2tog, sc inn next 3 sc, 2 sc in next sc. (6)
Rws 7-8: Ch 1, turn; sc in each sc across. (6)
Finish off leaving a long tail. Sew 2 SPOILER SUPPORTS together. Insert toothpicks for support. Sew Rw 1 of SPOILER SUPPORTS to SPOILER. Sew Rw 8 of SPOILER SUPPORTS to REAR DECK LID. Weave in ends.

NUMBER PLATES (MAKE 4):

Rw 1: With spring green and B crochet hook, ch 12, sc in second ch from hook and in each ch across. (11)
Rw 2: Ch 1, turn; sc in next sc, change to black, sc in next 4 sc, change to white, sc in next sc, change to blue, sc in next 4 sc, change to white, sc in next sc. (11)
Rw 3: Ch 1, turn; sc in each sc across. (11) Change to spring green.
Rw 4: Ch 1, turn; sc in each sc across. (11)
Rw 5: Ch 1, turn; sc in next 2 sc, change to white, sc in next 2 sc, change to spring green, sc in next 3 sc, change to white, sc in next 2 sc, change to spring green, sc in next 2 sc. (11)
Rw 6: Ch 1, turn; sc in next sc, change to white, sc in next sc, change to spring green, sc in next 2 sc, change to white, sc in next sc, change to spring green, sc in next sc, change to white, sc in next sc, change to spring green, sc in next 2 sc, change to white, sc in next sc, change to spring green, sc in next sc. (11)
Rw 7: Ch 1, turn; sc in next 2 sc, change to white, sc in next 2 sc, change to spring green, sc in next 2 sc, change to white, sc in next sc, change to spring green, sc in next 2 sc, change to white, sc in next sc, change to spring green, sc in next sc. (11)
Rw 8: Ch 1, turn; sc in next sc, change to white, sc in next sc, change to spring green, sc in next 2 sc, change to white, sc in next sc, change to spring green, sc in next sc, change to white, sc in next sc, change to spring green, sc in next 2 sc, change to white, sc in next sc, change to spring green, sc in next sc. (11)
Rw 9: Ch 1, turn; sc in next 2 sc, change to white, sc in next 2 sc, change to spring green, sc in next 3 sc, change to white, sc in next 2 sc, change to spring green, sc in next 2 sc. (11)
Rw 10: Ch 1, turn; sc in each sc across. (11) Change to white.
Rw 11: Ch 1, turn; sc in each sc across. (11)
Rw 12: Ch 1, turn; sc in next sc, change to black, sc in next 6 sc, change to red, sc in next 3 sc, change to white, sc in next sc. (11)
Rw 13: Ch 1, turn; sc in each sc across. (11)
Finish off. Weave in ends. Glue NUMBER PLATES to DRIVER’S SIDE, PASSENGER’S SIDE, BACK, and HOOD.

POSITION PLATES (MAKE 2):
Rw 1: With black and B crochet hook, ch 10, sc in second ch from hook and in each ch across. (9)
Rw 2: Ch 1, turn; sc in next 5 sc, change to lemon, sc in next 3 sc, change to black, sc in next sc. (9)
Rw 3: Ch 1, turn; sc in next 2 sc, change to lemon, sc in next sc, change to black, sc in next 6 sc. (9)
Rw 4: Ch 1, turn; sc in next 6 sc, change to lemon, sc in next sc, change to black, sc in next 2 sc. (9)
Rw 5: Ch 1, turn; sc in next 2 sc, change to lemon, sc in next sc, change to black, sc in next 6 sc. (9)
Rw 6: Ch 1, turn; sc in next 5 sc, change to lemon, sc in next 2 sc, change to black, sc in next 2 sc. (9)
Rw 7: Ch 1, turn; sc in each sc across. (9)
Finish off. Weave in ends. Glue POSITION PLATES over small window on each side behind doors.

Aston Martin Vantage GT3 is copyrighted by Aston Martin Logonda Global Holdings PLC. Toyota Supra is copyrighted by the Toyota Motor Corporation. IMSA or International Motor Sports Association is copyrighted by NASCAR holdings.

This crochet pattern is an original pattern and is © by Christjan Bee (July 2026). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use, but you may not sell or distribute it, or sell items made from this pattern.