This is a custom version of a 2015 Ford Mustang. This Ford Mustang is fashioned after a
diecast put out by Hot Wheels. The only
change that the customer made to the customization is he wanted the Autobots’
Logo instead of the #15 on the doors.
MATERIALS:
Worsted weight yarn: Red,
black, white, gray, and burgundy.D crochet hook
Polyester Fiberfil
Tapestry needle
22-Count Aida cloth
DMC embroidery floss -- #321 Red
Tapestry needle
Floral wire
BOTTOM:
Rw 1: With black, ch 11, 2 sc
in second ch from hook, sc in next 8 sc, 2 sc in next sc. (12)Rw 2: Ch 1, turn; 2 sc in next sc, sc in next 10 sc, 2 sc in next sc. (14)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next 12 sc, 2 sc in next sc. (16)
Rw 4: Ch 1, turn; 2 sc in next sc, sc in next 14 sc, 2 sc in next sc. (18)
Rws 5-6: Ch 1, turn; sc in each sc across. (18)
Rw 7: Ch 1, turn; slip st in next 4 sc, ch 1, sc in same sc as last slip st, sc in next 11 sc, leaving remaining sc unworked. (12)
Rws 8-13: Ch 1, turn; sc in next 12 sc. (12)
Finish off.
Rw 14: Ch 3, sc in next 12 sc of Rw 13.
Rw 15: Ch 4, sc in second ch from hook, sc in next 2 ch, sc in next 12 sc, sc in next 3 ch. (18)
Rws 16-34: Ch 1, turn; sc in each sc across. (18)
Rw 35: Ch 1, turn; slip st in next 4 sc, ch 1, sc in same sc as last slip st, sc in next 11 sc, leaving remaining sc unworked. (12)
Rws 36-41: Ch 1, turn; sc in next 12 sc. (12)
Finish off.
Rw 42: Ch 3, sc in next 12 sc of Rw 41. (12)
Rw 43: Ch 4, sc in second ch from hook, sc in next 2 ch, sc in next 12 sc, sc in next 3 ch. (18)
Rw 44: Ch 1, turn; sc2tog, sc in next 14 sc, sc2tog. (16)
Rw 45: Ch 1, turn; sc2tog, sc in next 12 sc, sc2tog. (14)
Finish off.
WHEELWELLS (MAKE 4):
Rw 1: With black, ch 5, 2 sc in second ch from hook sc in next 2 ch, 2 sc in next ch. (6)
Rw 2: Ch 1, turn; 2 sc in next sc, sc in next 4 sc, 2 sc in next sc. (8)
Rws 3-6: Ch 1, turn; sc in each sc across. (8)
Rd 7: Working in the side of Rws, ch 1, sc in next 6 sc, working in free loops of foundation ch, sc in next 4 ch, sc in next 6 Rws. (16)
Rds 8-9: Ch 1, turn; sc in each sc around. (16)
Finish off. Weave in ends.
TIRES (MAKE 4):
Rd 1: With black, 5 sc in
magic ring, slip st in first sc. (5)Rd 2: Ch 1, 2 sc in each sc around, slip st in first sc. (10)
Rd 3: Ch 1, (sc in next sc, 2 sc in each sc around, slip st in first sc
Rd 4: Ch 1, (sc in next 2 sc, sc in next 2 sc) around, slip st in first sc. (20)
Rd 5: Ch 1, working in back loops only, sc in each sc around. (20)
Rds 6-7: sc in each sc around. (20)
Rd 8: Working in back loops only, (sc in next 2 sc, sc2tog) around. (15)
Rd 9: (sc in next sc, sc2tog) around. (10)
STUFF TIRES FIRMLY.
Rd 10: sc2tog around. (5)
Finish off leaving a long tail. Using red, embroider around Rd 3. OPTIONAL: Glue dowel to TIRES through opening in Rd 10. Weave tail through sc of Rd 10, pull tightly and secure. Sew TIRES to WHEELWELL BACK. OPTIONAL: Use buttons to attach TIRES so that they can turn.
FRONT:
Rw 1: Attach red in the side
of Rw 6 of BOTTOM, ch 1, sc in same Rw as attachment, sc in next 5 Rws, working
in free loops of foundation ch, sc in next 10 ch, working in the side of Rws,
sc in next 6 Rws. (22)Rw 2: Ch 1, turn; sc in next sc, slip st in next 3 sc, sc in next sc, ch 12, skip next 12 sc, sc in next sc, slip st in next 3 sc, sc in next sc.
Rw 3: Ch 1, turn; sc in next sc, ch 3, skip next 3 slip st, sc in next sc, sc in next 12 ch, sc in next sc, ch 3, skip next 3 slip st, sc in next sc.
RIGHT FRONT:
Rw 4: Ch 1, turn; sc in next sc, sc in next 3 ch, sc in next sc, leave remaining sc unworked. (5)
Rw 5: Ch 1, turn; sc in next 4 sc, 2 sc in next sc. (6)
Rw 6: Ch 1, turn; 2 sc in next sc, change to white, sc in next 4 sc, change to red, 2 sc in next sc. (8)
Finish off. Weave in ends.
LEFT FRONT:
Rw 4: Skip next 12 sc, attach red in next sc, ch 1, sc in same sc as attachment, sc in next 3 ch, sc in next sc. (5)
Rw 5: Ch 1, turn; 2 sc in next sc, sc in next 4 sc. (6)
Rw 6: Ch 1, turn; 2 sc in next sc, change to white, sc in next 4 sc, change to red, 2 sc in next sc. (8)
Finish off leaving a long tail. Sew LEFT and RIGHT FRONTS to WHEELWELLS. Weave in ends.
FRONT GRILL:
Rw 1: With black, ch 23, sc in
second ch from hook and in each ch across.
(22)Rws 2-6: Ch 1, turn; sc in each sc across. (22)
Finish off. Weave in ends. Using clear sewing thread, sew FRONT GRILL to GRILL.
BACK:
Rw 1: Attach red in the side
of Rw 43, ch 1, sc in same Rw as attachment, change to black, sc in next 2 Rws,
working in sc of Rw 45, sc in next 18 sc, working in the side of Rws, sc in
next 2 Rws, change to red, sc in next Rw.
(20)Rw 2: Ch 1, turn; sc in next 2 sc, change to black, sc in next 16 sc, change to red, sc in next 2 sc. (20)
Rw 3: Ch 1, turn; sc in next 8 sc, change to white, sc in next 4 sc, change to red, sc in next 8 sc. (20)
Rw 4: Ch 1, turn; sc in each sc across. (20)
Rw 5: Ch 1, turn; 2 sc in next sc, sc in next 3 sc, change to burgundy, sc in next 3 sc, change to black, sc in next 6 sc, change to burgundy, sc in next 3 sc, change to red, sc in next 3 sc, 2 sc in next sc. (22)
Rw 6: Ch 1, turn; 2 sc in next sc, sc in next 3 sc, change to burgundy, sc in next 4 sc, change to black, sc in next 6 sc, change to burgundy, sc in next 4 sc, change to red, sc in next 3 sc, 2 sc in next sc. (24)
Finish off leaving a long tail. Sew the sides of Rws to WHEELWELLS. Weave in ends.
DRIVER’S SIDE:
Rw 1: Attach gray in the side
of Rw 34 and working toward the FRONT, ch 1, sc in same Rw as attachment, sc in
next 3 Rws, change to red, sc in next 16 Rws.
(20)Rw 2: Ch 1, turn; sc in next sc, change to white, sc in next 3 sc, change to red, sc in next 16 sc. (20)
Rw 3: Ch 1, turn; sc in next sc, change to white, sc in next 18 sc, change to red, sc in next sc. (20)
Rw 4: Ch 1, turn; sc in next sc, change to black, sc in next 18 sc, change to red, sc in next sc. (20)
Rw 5: Ch 1, turn; 2 sc in next sc, change to black, sc in next sc, change to red, sc in next 13 sc, change to black, sc in next 4 sc, change to red, 2 sc in next sc. (22)
Rw 6: Ch 1, turn; 2 sc in next sc, change to black, sc in next 4 sc, change to red, sc in next 16 sc, 2 sc in next sc. (24)
Finish off. Sew the sides of Rws to WHEELWELL. Weave in ends.
PASSENGER’S SIDE:
Rw 1: Attach red in the side
of Rw 15, ch 1, sc in same Rw as attachment, sc in next 15 Rws, change to gray,
sc in next 4 sc. (20) Change to redRw 2: Ch 1, turn; sc in next 16 sc, change to white, sc in next 3 sc, change to red, sc in next sc. (20)
Rw 3: Ch 1, turn; sc in next sc, change to white, sc in next 18 sc, change to red, sc in next sc. (20)
Rw 4: Ch 1, turn; sc in next sc, change to black, sc in next 18 sc, change to red, sc in next sc. (20)
Rw 5: Ch 1, turn; 2 sc in next sc, change to black, sc in next 4 sc, change to red, sc in next 13 sc, change to black, sc in next sc, change to red, 2 sc in next sc. (22)
Rw 6: Ch 1, turn; 2 sc in next sc, sc in next 16 sc, change to black, sc in next 4 sc, change to red, 2 sc in next sc. (24)
Finish off. Sew the sides of Rws to WHEELWELL. Weave in ends.
Rw 1: Attach red in the 5th sc of RIGHT FRONT and working toward WHEEELWELL, ch 1, sc in next 4 sc, sc in next 4 sc on WHEELWELL, working in PASSENGER SIDE, sc in next sc, change to black, sc in next 21, change to red, sc in next 2 sc, sc in next 4 sc on WHEELWELL, working in BACK, sc in next 5 sc, change to burgundy, sc in next 4 sc, change to black, sc in next 6 sc, change to burgundy, sc in next 4 sc, change to red, sc in next 5 sc, sc in next 4 sc on WHEELWELL, working in DRIVER’S SIDE, sc in next 2 sc, change to black, sc in next 21 sc, change to red, sc in next sc, sc in next 4 sc on WHEELWELL, sc in next 4 sc on FRONT, slip st in next sc.
Rw 2: Ch 1, turn; skip slip st, slip st in next 2 sc, sc in next 92 sc, slip st in next sc, leave remaining sc unworked.
Finish off. Weave in ends.
BOTTOM TRIM:
Rw 1: Working along bottom of
edge of 2015 FORD MUSTANG, attach red in side of rear WHEELWELL, Ch 1, sc in
same sc as attachment, sc in next 16 sc of WHEELWELL, change to black, sc in
next 20 Rws of PASSENGER’S SIDE, change to red, sc in next 16 sc of WHEELWELL, change
to black, working along bottom edge of FRONT, sc in next 6 Rws, sc in next 10
sc, sc in next 6 Rws, change to red, sc in next 16 sc of WHEELWELL, change to
black, sc in next 20 Rws of DRIVER’S SIDE, change to red, sc in next 16 sc of WHEELWELL.Finish off. Weave in ends.
HOOD:
Rw 1: With black, ch 11, 2 sc
in second ch from hook, sc in next 8 sc, 2 sc in next sc. (12)
Change to red.Rw 2: Ch 1, turn; (sc, change to black, sc) in next sc, sc in next 10 sc, (sc, change to red, sc) in next sc. (14)
Rw 3: Ch 1, turn; 2 sc in next sc, change to black, sc in next sc, change to gray, sc in next sc, change to black, sc in next 8 sc, change to gray, sc in next sc, change to black, sc in next sc, change to red, 2 sc in next sc. (16)
Rw 4: Ch 1, turn; 2 sc in next sc, sc in next 14 sc, 2 sc in next sc. (18)
Rw 5: Ch 1, turn; sc in next 3 sc, change to black, sc in next sc, change to red, sc in next 10 sc, change to black, sc in next sc, change to red, sc in next 3 sc. (18)
Rw 6: Ch 1, turn; sc in each sc across. (18)
Rw 7: Ch 1, turn; sc in next 3 sc, change to black, sc in next sc, change to red, sc in next 10 sc, change to black, sc in next sc, change to red, sc in next 3 sc. (18)
Rws 8-14: Ch 1, turn; sc in each sc across. (18)
Finish off leaving a long tail. Sew HOOD to 2015 FORD MUSTANG. Weave in ends. Begin stuffing 2015 FORD MUSTANG firmly.
SIDE AND FRONT WINDOWS:
Rw 1: Attach red before
taillights on DRIVER’S SIDE, ch 1, sc in same sc as attachment, sc in next 16
sc, change to gray, sc in next 13 sc, change to red, sc2tog, change to gray,
working in sc of HOOD, sc in next 18 sc, change to red, working in sc of
PASSENGER’S SIDE, sc2tog, change to gray, sc in next 13 sc, change to red, sc
in next 17 sc. (80)Rw 2: Ch 1, turn; sc in next 17 sc, change to gray, sc in next 12 sc, change to red, sc2tog, change to gray, sc2tog, sc in next 14 sc, sc2tog, change to red, sc2tog, change to gray, sc in next 12 sc, change to red, sc in next 17 sc. (76)
Finish off leaving a long tail.
Rw 3: turn; skip next 4 sc, attach red in next sc, sc in next 12 sc, change to gray, sc in next 11 sc, change to red, sc2tog, change to gray, sc2tog, sc in next 12 sc, sc2tog, change to red, sc2tog, change to gray, sc in next 11 sc, change to red, sc in next 12 sc, slip st in next sc. (24)
Rw 4: Ch 1, turn; skip next slip st, slip st in next 3 sc, sc in next 9 sc, change to gray, sc in next 10 sc, change to red, sc2tog, change to gray, sc2tog, sc in next 10 sc, sc2tog, change to red, sc2tog, change to gray, sc in next 10 sc, change to red, sc in next 9 sc, slip st in next sc.
Rw 5: Ch 1, turn; skip slip st, slip st in next 3 sc, sc in net 15 sc, sc2tog, change to gray, sc2tog, sc in next 8 sc, sc2tog, change to red, sc2tog, ,sc in next 15 sc, slip st in next sc.
Finish off. Sew each side of Rw 1 and Rw 2 to BACK. Weave in ends.
AUTOBOTS’ LOGO:
This would be a good time to make and attach the AUTOBOTS’ LOGO if you
are doing so. Using 22-count Aida cloth
and red embroidery floss while following the graph below, create 2 AUTOBOTS’ LOGO. Sew 1 AUTOBOTS’ LOGO to each door.
Rw 1: With red, ch 8, sc in second ch from hook and in each ch across. (7)
Rw 2: Ch 1, turn; sc2tog, sc in next sc, sc2tog, slip st in next sc. (4)
Finish off leaving a long tail. Sew SIDE PODS to SIDE AND FRONT WINDOWS next to each SIDE WINDOW. Weave in ends.
HOOD AIR MANIFOLD:
Rw 1: With black, ch 8, sc in second
ch from hook, sc in next 2 ch, change to red, sc in next ch, change to black,
sc in next 3 ch. (7)Rws 2-3: Ch 1, turn; sc in next 3 sc, change to red, sc in next sc, change to black, sc in next 3 sc. (7) Change to red after Rw 3.
Rw 4: Ch 1, turn; (sc, change to black, sc) in next sc, sc in next 2 sc, change to red, sc in next sc, change to black, sc in next 2 sc, (sc, change to red, sc) in next sc. (9)
Rws 5-6: Ch 1, turn; sc in next sc, change to black, sc in next 3 sc, change to red, sc in next sc, change to black, sc in next 3 sc, change to red, sc in next sc. (9)
Rw 7: Ch 1, turn; 2 sc in next sc, change to black, sc in next 3 sc, change to red, sc in next sc, change to black, sc in next 3 sc, change to red, 2 sc in next sc. (11)
Rws 8-14: Ch 1, turn; sc in next 2 sc, change to black, sc in next 3 sc, change to red, sc in next sc, change to black, sc in next 3 sc, change to red, sc in next 2 sc. (11)
Rw 15: Ch 1, turn; sc2tog, change to black, sc in next 3 sc, change to red, sc in next sc, change to black, sc in next 3 sc, change to red, sc2tog. (9) Change to black.
Rw 16: Ch 1, turn; sc2tog, sc in next 2 sc, change to red, sc in next sc, change to black, sc in next 2 sc, sc2tog. (7)
Finish off leaving a long tail. Sew HOOD AIR MANIFORD to HOOD and FRONT WINDOW adding a small amount of stuffing before closing.
TOP OF BODY:
Rw 1: With black, ch 11, sc in
second ch from hook and in each ch across.
(10)Rws 2-12: Ch 1, turn; sc in each sc across. (10) Change to gray after Rw 12.
Rws 13-22: Ch 1, turn; sc in each sc across. (10) Change to red after Rw 22.
Rws 23-27: Ch 1, turn; sc in each sc across. (10)
Finish off leaving a long tail. Sew TOP OF BODY to BODY stuffing before closing. Weave in ends.
SPOILER TOP:
Rw 1: With red, ch 15, sc in
second ch from hook and in each ch across.
(14)Rw 2: Ch 1, turn; sc in each sc across. (14)
Finish off. Weave in ends.
SPOILER SIDES (MAKE 2):
Rw 1: With red, ch 5, sc in
second ch from hook and in each ch across.
(4)Rw 2: Ch 1, turn; sc in next 3 sc, 2 sc in next sc. (5)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next 2 sc, sc2tog. (5)
Rw 4: Ch 1, turn; sc3tog, sc in next sc, 2 sc in next sc. (4)
Rw 5: Ch 1, turn; 2 sc in next sc, sc3tog. (3)
Rw 6: Ch 1, turn; sc2tog, sc in next sc. (2)
Finish off leaving a long tail. Sew SPOILER SIDES to SPOILER TOP. Weave in ends.
SPOILER BACK EDGE:
Rw 1: Working over floral wire,
attach red in the side of Rw 1 of SPOILER SIDE, ch 1, sc in same Rw as
attachment, sc in next 5 Rws, working in free loops of foundation ch of SPOILER
TOP, sc in next 14 ch, working in the side of Rws of SPOILER SIDE, sc in next 6
Rws. Finish off leaving a long tail. Sew SPOILER to 2015 FORD MUSTANG. Weave in ends.
Ford Mustang is copyright The Ford Motor Company. Autobots’ Logo are copyright Hasbro, Inc.
This crochet pattern is an
original pattern and is © by Christjan Bee (January 2020). Please do not claim this pattern as your
own. If you wish to share this pattern,
you may link to this pattern but please do not reprint/repost it on your
site. You may print and keep a copy for
your own personal use, but you may not sell or distribute it, or sell items
made from this pattern.
No comments:
Post a Comment