IDA'S Z-RING

 

This is the red version of the Z-Ring that was introduced as a key item in Generation VII (Sun and Moon) of Pokemon. It is a bracelet that allows a Trainer and their Pokemon to gather the Z-Power required to perform Z-Moves. This is Ida’s Z-Ring from the television show. The customer also requested a Mimikium Z Crystal to be attached to Ida’s Z-Ring. That pattern is included.

MATERIALS:
Worsted Weight Yarn: White, black, and orange
Sport Weight Yarn: pale yellow.
B crochet hook
Polyester fiberfill
Yarn Needle
Center Release Buckle
Embroidery floss: black

CENTER PLATE BOTTOM:
Rw 1: With black, ch 2, 3 sc in second ch from hook. (3)
Rw 2: Ch 1, turn; 2 sc in next sc, sc in next sc, 2 sc in next sc. (5)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next 3 sc, 2 sc in next sc. (7) Change to white.
Rw 4: Ch 1, turn; 2 sc in next sc, sc in next 5 sc, 2 sc in next sc. (9)
Rw 5: Ch 1, turn; 2 sc in next sc, sc in next 7 sc, 2 sc in next sc. (11)
Rw 6: Ch 1, turn; 2 sc in next sc, sc in next 9 sc, 2 sc in next sc. (13)
Rws 7-13: Ch 1, turn; sc in each sc across. (13)
Rw 14: Ch 1, turn; sc2tog, sc in next 9 sc, sc2tog. (11)
Rw 15: Ch 1, turn; sc2tog, sc in next 7 sc, sc2tog. (9)
Rw 16: Ch 1, turn; sc3tog, sc in next 3 sc, sc3tog. (5)
Rw 17: Ch 1, turn; sc2tog, sc in next sc, sc2tog. (3)
Rw 18: Ch 1, turn; sc3tog. (1)
Finish off leaving a long tail. Sew top and bottom edges together. Weave in ends.

CENTER PLATE TOP:
Rw 1: With black, ch 2, 3 sc in second ch from hook. (3)
Rw 2: Ch 1, turn; 2 sc in next sc, sc in next sc, 2 sc in next sc. (5)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next 3 sc, 2 sc in next sc. (7) Change to white.
Rw 4: Ch 1, turn; 3 sc in next sc, change to black, sc2tog, sc in next sc, sc2tog, change to white, 3 sc in next sc. (9)
Rw 5: Ch 1, turn; 2 sc in next sc, sc in next sc, 2 sc in next sc, change to black, sc3tog, change to white, 2 sc in next sc, sc in next sc, 2 sc in next sc. (11)
Rw 6: Ch 1, turn; 2 sc in next sc, sc in next 9 sc, 2 sc in next sc. (13)
Rws 7-13: Ch 1, turn; sc in each sc across. (13)
Rw 14: Ch 1, turn; sc2tog, sc in next 9 sc, sc2tog. (11)
Rw 15: Ch 1, turn; sc2tog, sc in next 7 sc, sc2tog. (9)
Rw 16: Ch 1, turn; sc3tog, sc in next 3 sc, sc3tog. (5)
Rw 17: Ch 1, turn; sc2tog, sc in next sc, sc2tog. (3)
Rw 18: Ch 1, turn; sc3tog. (1)
Finish off leaving a long tail. Using black, embroider “Z” on CENTER PLATE TOP. Sew the bottom edges together. Weave in ends.

CENTER PLATE SIDE WINGS (COMPLETE ON BOTH SIDE OF CENTER PLATES):
Rw 1: Attach white in the side of Rw 6 of CENTER PLATE TOP, ch 1, sc in same Rw as attachment, sc in next 7 Rws. (8)
Rw 2: Ch 1, turn; sc in each sc across. (8)
Rw 3: Ch 1, turn; sc in next 3 sc, sc2tog, sc in next 3 sc. (7)
Finish off leaving a long tail. Sew side of CENTER PLATE SIDE WINGS together. Weave in ends.

WRIST BAND (COMPLETE ON BOTH SIDES OF CENTER PLATE TOP):
Rw 1: With orange, ch 8, sc in second ch from hook and in each ch across. (7)
Rws 2-23: Ch 1, turn; sc in each sc across. (7)
Rw 24: Ch 1, turn; sc in next 3 sc, 2 sc in next sc, sc in next 3 sc. (8)
Finish off leaving a long tail. Feed WRIST BAND through each side of the CENTER RELEASE BUCKLE and sew Rw 1 to CENTER PLATE SIDE TOP WING and Rw 24 to CENTER PLATE SIDE BOTTOM WING. Sew sides of WRIST BAND closed. Weave in ends.

TOP EDGE OF CENTER PLATE:
Rw 1: Working through both thicknesses, attach white in the side of Rw 13, ch 2, sc in second ch from hook, sc in same Rw as attachment, sc in next 2 Rws, hdc in next 3 Rws, working in sc of Rw 13, (2 hdc, dc, 2 hdc) in next sc, hdc in next 3 Rws, sc in next 2 Rws, ch 2, sc in second ch from hook, slip st in same Rw as last sc.
Finish off. Weave in ends.

MIMIKIUM Z CRYSTAL:

Worsted weight yarn: pale yellow and black
Rd 1: With pale yellow, 6 sc in magic ring. (6)
Rd 2: (sc in next sc, sc2tog) around. (4)
Rd 3: sc in each sc around, slip st in first sc. (4)
Rd 4: Ch 1, 2 sc in each sc around, slip st in first sc. (8)
Rd 5: Ch 1, turn; sc in each sc around, slip st in first sc. (8)
Rd 6: Ch 1, turn; (2 sc in next sc, sc in next 2 sc, 2 sc in next sc) around, slip st in first sc. (12)
Rd 7: Ch 1, turn; (2 sc in next sc, sc in next 4 sc, 2 sc in next sc) around, slip st in first sc. (16)
Rd 8: Ch 1, turn; sc in each sc around, slip st in first sc. (16)
Rd 9: Ch 1, turn; (sc2tog, sc in next 4 sc, sc2tog) around, slip st in first sc. (12)
Rd 10: Ch 1, turn; (sc2tog, sc in next 2 sc, sc2tog) around, slip st in first sc. (8)
Rd 11: Ch 1, turn; sc in each sc around, slip st in first sc. (8)
STUFF MIMIKIUM Z CRYSTAL
Rd 12: Ch 1, turn; sc2tog around, slip st in first sc. (4)
Rd 13: Ch 1, (sc in next sc, 2 sc in next sc) around. (6)
Rd 14: (sc in next sc, sc2tog) around. (4)
Finish off leaving a long tail. Weave tail through sc of Rd 14, pull tightly and secure. Using black, embroider symbol on MIMIKIUM Z CRYSTAL. Sew small snaps on MIMIKIUM Z CRYSTAL. Weave in ends.

Ida, Z-Ring, Mimikyu, Mimikium Z Crystal, and Pokemon are copyrighted Nintendo and their respective creators.

This pattern is an original pattern and is © by Christjan Bee (May 2024). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint it on your site. You may keep a copy for your own personal use, but you may not sell or distribute it, or sell items made from this pattern.