STEELBEAK (DISNEY'S DUCKTALES AND DARKWING DUCK)

This continues a series of plush dolls requested by a customer that are based of characters from a variety of television shows from the past and present and on various platforms. Steelbeak is a character that he made several appearances as a recurring antagonist on Disney’s Darkwing Duck along with several episodes of Disney’s Ducktales.

The customer also requested a special bathrobe and slippers set for Steelbeak. The pattern for those will be coming soon.

MATERIALS:
Worsted weight yarn: Lemon, gold, white, black, teal, red, and burgundy.
C Crochet hook
Polyester fiberfill
Tapestry needle
3 green chenille stems
2 hook and eye sets
5 snap sets
5 small black buttons
Black ribbon
Black and white sewing thread
Sewing needle

THUMBS (MAKE 2):
Rd 1: With lemon, ch 2, 3 sc in second ch from hook working around ch. (3)
Rd 2: sc in each sc around. (3)
Finish off. Weave in ends.

FINGERS (MAKE 6):
Rd 1: With lemon, ch 2, 3 sc in second ch from hook working around ch. (3)
Rds 2-3: sc in each sc around. (3)
Finish off in first 2 FINGERS for each ARM. DO NOT FINISH OFF in third FINGER for each ARM.

ARMS (MAKE 2):
Rd 1: sc in next 2 sc on third FINGER, sc in next sc on first FINGER, sc in next 3 sc on second FINGER, sc in next 2 sc on first FINGER, sc in next sc on third FINGER. (9)
Rd 2: sc in each sc around. (9)
Rd 3: sc in each sc on THUMB, sc in next 9 sc. (12)
Rd 4: (sc2tog) twice, sc in next 8 sc. (10)
Rd 5: (sc2tog) twice, sc in next 6 sc. (8)
Rds 6-16: sc in each sc around. (8)
BEGIN STUFFING ARMS FIRMLY. CONTINUE STUFFING ARMS FIRMLY AS YOU GO ALONG.
Rd 17: (sc in next 3 sc, 2 sc in next sc) around. (10)
Rds 18-23: sc in each sc around. (10)
Finish off. Weave in ends.

HEELS (MAKE 2):
Rd 1: With gold, 8 sc in magic ring. (8)
Rds 2-3: sc in each sc around. (8)
Finish off. Weave in ends. Stuff HEELS firmly.

LEGS (MAKE 2):
Rd 1: With gold, 8 sc in a magic ring. (8)
Rds 2-6: sc in each sc around. (8)
NOW WORKING IN ROWS.
Rw 7: sc in next 4 sc leaving remaining sc of Rd 4 unworked. (4)
Rw 8: Ch 1, turn; sc in next 4 sc. (4)
Rw 9: Ch 1, turn; sc in each sc across. (4)
NOW WORKING IN RDS AGAIN.
Rd 10: Ch 1, sc in the side of Rows 7-9, slip st in unworked sc on Rd 6, sc in the side of Rows 7-9, holding next sc on Rw 9 and first sc on HEEL together and working through both thicknesses, sc in next 4 sc
Rd 11: (sc in next 5 sc, sc2tog) around. (12)
Rd 12: (sc in next 4 sc, sc2tog) around. (10)
BEGIN STUFFING LEGS FIRMLY. CONTINUE STUFFING LEGS FIRMLY AS YOU GO ALONG.
Rds 13-22: sc in each sc around. (10) Change to lemon after Rd 22.
Rds 23-33: sc in each sc around. (10)
Finish off. Weave in ends.

BODY:
Rd 1: With red, ch 2, 4 sc in second ch from hook. (4)
Rd 2: sc in next sc, sc in next 10 sc on RIGHT LEG starting with sc #6, sc in next 2 sc on BODY, sc in next 10 sc on LEFT LEG starting with sc #1, sc in next sc on BODY. (24)
Rds 3-9: sc in each sc around. (24) Change to lemon after Rd 9.
Rds 10-12: sc in each sc around. (24)
Rd 13: (sc in next 11 sc, 2 sc in next sc) around. (26)
Rds 14-15: sc in each sc around. (26)
Rd 16: (sc in next 12 sc, 2 sc in next sc) around. (28)
Rds 17-18: sc in each sc around. (28)
Rd 19: (sc in next 13 sc, 2 sc in next sc) around. (30)
Rds 20-21: sc in each sc around. (30)
Rd 22: sc in next 16 sc, holding next sc on BODY and sc #3 on RIGHT ARM together and working through both thicknesses, sc in next 2 sc, sc in next 13 on BODY, holding next sc on BODY and sc #7 on LEFT ARM together and working through both thicknesses, sc in next 2 sc.
Rd 23: sc in next 13 sc, sc in next 8 sc on RIGHT ARM, sc in next 13 sc on BODY, sc in next 8 sc on LEFT ARM. (42)
Rd 24: sc in each sc around. (42)
Rd 25: sc in next 13 sc, (sc2tog) 4 times, sc in next 13 sc, (sc2tog) 4 times. (34)
Rd 26: sc2tog, sc in next 9 sc, (sc2tog) 4 times, sc in next 9 sc, (sc2tog) 3 times. (26)
Rd 27: sc2tog, sc in next 7 sc, (sc2tog) 3 times, sc in next 7 sc, (sc2tog) twice. (20)
Rd 28: (sc in next 3 sc, sc2tog) around. (16)
BEGIN STUFFING BODY FIRMLY. CONTINUE STUFFING BODY FIRMLY AS YOU GO ALONG.
Rds 29-39: sc in each sc around. (16)
Rd 40: (sc in next sc, sc2tog) around. (12)
Rd 41: sc2tog around. (6)
Finish off with a long tail. Weave tail through sc of Rd 44, pull tightly, and secure. Weave in ends

GABBLER:
Rd 1: With red, 6 sc in magic ring. (6)
Rd 2: (sc in next 2 sc, 2 sc in next sc) around. (8)
Rds 3-7: sc in each sc around. (8)
Finish off leaving a long tail. Sew GABBLER to head of STEELBEEK. Weave in ends.

UPPER BEAK:
Rd 1: With pewter, ch 4, sc in second ch from hook, sc in next ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 2 ch. (7)
Rd 2: Ch 1, turn; sc in next 3 sc, 3 sc in next sc, sc in next 3 sc. (9)
Rd 3: Ch 1, turn; sc in each sc around. (9)
Finish off. Weave in ends.

LOWER BEAK:
Rd 1: With pewter, 6 sc in magic ring. (6)
Rd 2: (sc in next sc, 2 sc in next sc) around, slip st in first sc. (9)
Rd 3: Ch 1, turn; sc in each sc around. (9)
Rd 4: Ch 1, turn; sc in next 4 sc, 2 sc in next sc, sc in next 4 sc. (11)
Finish off leaving a long tail. Sew UPPER BEAK and LOWER BEAK together.

BACK OF BEAK:
Rd 1: Attach pewter in last sc of Rd 2 of LOWER BEAK, sc in the side of Rd 3 of LOWER BEAK, holding Rd 4 of LOWER BEAK and Rd 3 of UPPER BEAK together and working through both thicknesses, (sc, ch 3, sc in second ch from hook, sc in next ch, sc) in next Rd, sc in the side of next 2 Rds of UPPER BEAK, sc in foundation ch of UPPER BEAK, sc in the side of next 2 Rds of UPPER BEAK, holding Rd 3 of UPPER BEAK and Rd 4 of LOWER BEAK together and working through both thicknesses, (sc, ch 3, sc in second ch from hook, sc in next ch, sc) in next Rd, sc in the side of Rd 3 of LOWER BEAK, sc in first sc of Rd 2 of LOWER BEAK, slip st in first sc.
Finish off leaving a long tail. Sew BEAK to head and GABBLER stuffing before closing. Weave in ends.

MOHAWK:
Rw 1: With red, ch 5, sc in second ch from hook, sc in next ch, hdc in next 2 ch. (4)
Rw 2: Ch 5, sc in second ch from hook, hdc in next ch, dc in next 2 ch, 2 sc in next ch. (6)
Rw 3: Ch 7, sc in second ch from hook, hdc in next 3 ch, dc in next 2 ch. (6)
Rw 4: Working in the side of Rw 3, ch, (sc, sc2tog) in the side of Rw 3.
Rw 5: Working in the side of Rws, ch 1, sc in the side of Rw 4, 2 sc in the side of Rw 3, sc in the side of Rw 2, 2 sc in the side of Rw 1.
Finish off leaving a long tail. Sew MOHAWK to head of STEELBEEK. Weave in ends.

CHEEKS (MAKE 2):
Rw 1: With lemon, ch 4, sc in second ch from hook and in each ch across. (3)
Rw 2: Ch 5, sc in second ch from hook, hdc in next ch, working in sc of Rw 1, dc in next 2 sc. (4)
Finish off leaving a long tail. Sew CHEEKS to head of STEELBEEK. Weave in ends.

EYES AND EYEBROWS:
Using white and black, embroider EYES. Using black, embroider EYEBROWS.

LARGE TAIL FEATHER:
Rw 1: With teal, ch 31, working over chenille stem, sc in second ch from hook, hdc in next ch, dc in next ch, tr in next 11 ch, dc in next 4 ch, hdc in next 4 ch, sc in next 8 ch. (30)
Finish off leaving a long tail. Sew LARGE TAIL FEATHER to BODY. Weave in ends.

SMALL TAIL FEATHERS (MAKE 2):
Rw 1: With teal, ch 27, working over chenille stem, sc in second ch from hook, hdc in next ch, dc in next ch, tr in next 9 ch, dc in next 3 ch, hdc in next 3 ch, sc in next 8 ch. (26)
Finish off leaving a long tail. Sew SMALL TAIL FEATHERS to BODY on each side of LARGE TAIL FEATHER. Weave in ends.

SHOES (MAKE 2):
Rd 1: With black, ch 11, 2 sc in second ch from hook, sc in next 8 ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 9 ch. (22)
Rd 2: (3 sc in next sc, sc in next 10 sc) around. (26)
Rd 3: Working in back loops only, sc in each sc around, slip st in first sc. (26)
Rd 4: slip st in next 2 sc changing to white in last slip st, ch 1, sc in same sc as slip st, sc in next 6 sc, change to black, sc in next 12 sc, change to white, sc in next 7 sc, slip st in first sc. (26)
Rd 5: Ch 1, turn; sc in next 7 sc, change to black, sc in next 12 sc, change to white, sc in next 7 sc, slip st in first sc. (26)
Rd 6: Ch 1, turn; sc2tog, sc in next 6 sc, change to black, sc in next sc, (sc2tog) 4 times, sc in next sc, change to white, sc in next 6 sc, sc2tog, slip st in first sc. (20)
Rd 7: Ch 1, turn; sc2tog, sc in next 6 sc, change to black, (sc2tog) twice, change to white, sc in next 6 sc, sc2tog, slip st in first sc. (16)
Finish off. Weave in ends. Place SHOES on LEGS.



PANTS:
Rw 1: With black, ch 33, sc in second ch from hook and in each ch across. (32)
Rw 2: Ch 1, turn; sc in next 20 sc. (20)
Rws 3-4: Ch 1, turn; sc in each sc across. (20)
Rw 5: Ch 13, sc in second ch from hook, sc in next 11 ch, sc in next 20 sc. (32)
Rws 6-13: Ch 1, turn; sc in each sc across. (32)
Rw 14: Ch 1, turn; overlapping first 2 sc and last 2 sc of Rw 13 together and working through both thicknesses, sc in next 2 sc, sc in next 28 sc, slip st in first sc
Finish off. Weave in ends. Sew 2 snaps to PANTS.
LEFT PANTS LEG:
Rw 15: Skip next 10 sc, slip st in next sc, ch 3, skip next 14 sc, slip st in next sc, ch 1, sc in next 15 sc, sc in next 3 ch. (18)
Rds 16-37: sc in each sc around. (18)
Finish off. Weave in ends.
RIGHT PANTS LEG:
Rw 15: Attach black in first unworked sc of Rw 14, ch 1, sc in same sc as attachment, sc in next 14 sc, working in free loops of ch-3, sc in next 3 ch. (18)
Rds 16-37: sc in each sc around. (18)
Finish off. Weave in ends. Place PANTS on STEELBEEK.

SHIRT:
Rw 1: With burgundy, ch 35, sc in second ch from hook and in each sc across. (34)
Rws 2-4: Ch 1, turn; sc in each sc across. (34)
Rw 5: Ch 1, turn; sc in next 10 sc, (2 sc in next sc, sc in next 11 sc) twice. (36)
Rws 6-8: Ch 1, turn; sc in each sc across. (36)
Rw 9: Ch 1, turn; sc in next 12 sc, (2 sc in next sc, sc in next 11 sc) twice. (38)
Rws 10-12: Ch 1, turn; sc in each sc across. (38)
Rw 13: Ch 1, turn; sc in next 8 sc, slip st in next 5 sc, sc in next 14 sc, slip st in next 5 sc, sc in next 6 sc.
Rw 14: Ch 1, turn; sc in next 6 sc, ch 5 (ARMHOLE), skip next 5 slip st, dc in next 14 sc, ch 5 (ARMHOLE), skip next 5 slip st, sc in next 8 sc.
Rw 15: Ch 1, turn; sc in next 6 sc, sc2tog, sc in next 5 ch, sc2tog, sc in next 10 dc, sc2tog, sc in next 5 ch, sc2tog, sc in next 4 sc. (34)
Rw 16: Ch 1, turn; sc in next 6 sc, (sc2tog, sc in next 5 sc) 4 times. (30)
Finish off. Weave in ends. Using black, embroider collar on SHIRT. Sew 4 small black buttons to SHIRT. Sew snaps to SHIRT. Using black ribbon to make bowtie. Sew bowtie on SHIRT. Place SHIRT on STEELBEEK.

JACKET:
Rw 1: With white, ch 41, sc in second ch from hook and in each ch across. (40)
Rws 2-14: Ch 1, turn; sc in each sc across. (40)
Rw 15: Ch 1, turn; sc2tog, sc in next 36 sc, sc2tog. (38)
Rw 16: Ch 1, turn; sc in each sc across. (38)
RIGHT FRONT:
Rw 17: Ch 1, turn; sc2tog, sc in next 3 sc, leaving remaining sc unworked. (4)
Finish off. Weave in ends.
BACK:
Rw 17: Skip next 6 sc, attach white in next sc, ch 1, sc in next 16 sc. (16)
Rw 18: Ch 1, turn; sc in each across. (16)
Finish off. Weave in ends.
LEFT FRONT AND TOP:
Rw 17: Skip next 6 sc, attach white in next sc, ch 1, sc in same sc as attachment, sc in next 2 sc, sc2tog. (4)
Rw 18: Ch 1, turn; sc in next 4 sc, ch 8, skip next ARMHOLE SPACE, working in sc of BACK, sc in next 16 sc, ch 8, skip next ARMHOLE SPACE, working in sc of RIGHT FRONT, sc in next 4 sc.
Rw 19: Ch 1, turn; sc2tog, sc in next 2 sc, sc in next 8 ch, sc in next 16 sc, sc in next 8 ch, sc in next 2 sc, sc2tog. (38)
Rw 20: Ch 1, turn; sc2tog, sc in next 6 sc, (sc2tog, sc in next 5 sc) 4 times, sc2tog. (32)
Rw 21: Ch 1, turn; sc2tog, (sc in next 8 sc, sc2tog) 3 times. (28)
Rw 22: Ch 1, turn; sc2tog, sc in next 4 sc, (sc2tog, sc in next 3 sc) 4 times. (22)
Rw 23: Ch 1, turn; sc2tog, sc in next 18 sc, sc2tog. (20)
Finish off. Weave in ends. Sew snaps on JACKET. Sew 1 small black button on JACKET.

SLEEVES (COMPLETE IN BOTH ARMHOLES):
Rd 1: Attach white in third sc of skipped 6 sc of ARMHOLE, ch 1, sc n same sc as attachment, sc evenly 18 more time around ARMHOLE. (19)
Rds 2-18: sc in each sc around. (19)
Rd 19: Working in front loops only, sc in each sc around. (19)
Finish off. Weave in ends.

SHIRT SLEEVE (COMPLETE ON BOTH JACKET SLEEVES):
Rd 1: Working in back loops of Rd 18 of JACKET SLEEVES, attach burgundy in first sc, ch 1, hdc in same sc as attachment, (hdc in next 2 sc, hdc2tog) 4 times, hdc in next 2 sc, slip st in first sc. (15)
Finish off. Weave in ends.

JACKET COLLAR:
Rw 1: Working in the side of Rws, attach black in the side of Rw 15, sc in next 3 Rws, 2 hdc in next Rw, (2dc, ch 2, slip st) in next Rw, ch 2, dc in next Rw, hdc in next Rw, sc in next 20 sc of Rw 23, working in the side of Rws, hdc in next Rw, dc in next Rw, ch 2, (slip st, ch 2, 2 dc) in Rw, 2 hdc in next Rw, sc in next 3 Rw, slip st in next Rw.
Finish off. Weave in ends.

Steelbeak, DuckTales, DarkWing Duck is copyright Walt Disney Co. and their respective creators.

This crochet pattern is an original pattern and is © by Christjan Bee (June 2021). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use, but you may not sell or distribute it, or sell items made from this pattern.