MATERIALS:
Worsted Weight Yarn: purple, lilac, white, pale yellow, black, and gray.
B crochet hook
Polyester fiberfill
Yarn Needle
Center Release Buckle
CENTER PLATE BOTTOM:
Rw 1: With purple, ch 2, 3 sc in second ch from hook. (3)
Rw 2: Ch 1, turn; 2 sc in next sc, sc in next sc, 2 sc in next sc. (5)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next 3 sc, 2 sc in next sc. (7)
Rw 4: Ch 1, turn; 2 sc in next sc, sc in next 5 sc, 2 sc in next sc. (9)
Rw 5: Ch 1, turn; 2 sc in next sc, sc in next 7 sc, 2 sc in next sc. (11)
Rw 6: Ch 1, turn; 2 sc in next sc, sc in next 9 sc, 2 sc in next sc. (13)
Rws 7-13: Ch 1, turn; sc in each sc across. (13)
Rw 14: Ch 1, turn; sc2tog, sc in next 9 sc, sc2tog. (11)
Rw 15: Ch 1, turn; sc2tog, sc in next 7 sc, sc2tog. (9)
Rw 16: Ch 1, turn; sc3tog, sc in next 3 sc, sc3tog. (5)
Rw 17: Ch 1, turn; sc2tog, sc in next sc, sc2tog. (3)
Rw 18: Ch 1, turn; sc3tog. (1)
Finish off leaving a long tail. Sew top and bottom edges together. Weave in ends.
CENTER PLATE TOP:
Rw 1: With purple, ch 2, 3 sc in second ch from hook. (3)
Rw 2: Ch 1, turn; 2 sc in next sc, sc in next sc, 2 sc in next sc. (5)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next 3 sc, 2 sc in next sc. (7)
Rw 4: Ch 1, turn; 2 sc in next sc, sc in next 5 sc, 2 sc in next sc. (9)
Rw 5: Ch 1, turn; 2 sc in next sc, sc in next 7 sc, 2 sc in next sc. (11)
Rw 6: Ch 1, turn; 2 sc in next sc, sc in next 9 sc, 2 sc in next sc. (13)
Rw 7: Ch 1, turn; sc in next 2 sc, change to white, sc in next 9 sc, change to purple, sc in next 2 sc. (13)
Rw 8: Ch 1, turn; sc in next 3 sc, change to white, sc in next 6 sc, change to purple, sc in next 4 sc. (13)
Rw 9: Ch 1, turn; sc in next 5 sc, change to white, sc in next 4 sc, change to purple, sc in next 4 sc. (13)
Rw 10: Ch 1, turn; sc in next 5 sc, change to white, sc in next 4 sc, change to purple, sc in next 4 sc. (13)
Rw 11: Ch 1, turn; sc in next 3 sc, change to white, sc in next 6 sc, change to purple, sc in next 4 sc. (13)
Rw 12: Ch 1, turn; sc in next 2 sc, change to white, sc in next 9 sc, change to purple, sc in next 2 sc. (13)
Rw 13: Ch 1, turn; sc in each sc across. (13)
Rw 14: Ch 1, turn; sc2tog, sc in next 9 sc, sc2tog. (11)
Rw 15: Ch 1, turn; sc2tog, sc in next 7 sc, sc2tog. (9)
Rw 16: Ch 1, turn; sc3tog, sc in next 3 sc, sc3tog. (5)
Rw 17: Ch 1, turn; sc2tog, sc in next sc, sc2tog. (3)
Rw 18: Ch 1, turn; sc3tog. (1)
Finish off leaving a long tail. Using pewter, embroider circle around “logo.” Sew bottom edges together. Weave in ends.
WRIST BAND (COMPLETE ON BOTH SIDES OF CENTER PLATE TOP):
Rw 1: Attach lilac in the side of Rw 6 of CENTER PLATE TOP, ch 1, sc in same Rw as attachment, sc in next 2 Rws, sc2tog, sc in next 3 sc. (7)
Rws 2-29: Ch 1, turn; sc in each sc across. (7)
Rw 30: Ch 1, turn; sc in next 3 sc, 2 sc in next sc, sc in next 3 sc. (8)
Finish off leaving a long tail. Feed WRIST BAND through each side of the CENTER RELEASE BUCKLE and sew Rw 15 to the side of CENTER PLATE BOTTOM. Sew sides of WRIST BAND closed. Weave in ends.
ULTRANECROZIUM Z CRYSTAL:
Rw 1: With pale yellow, 6 sc in magic ring. (6)
Rw 2: (sc in next sc, sc2tog) around. (4)
Rw 3: Flatten and working through both thicknesses, ch 1, 2 sc in next 2 sc. (4)
Rw 4: Ch 1, turn; sc in each sc across. (4)
Rw 5: Ch 1, turn; 2 sc in next sc, sc in next 2 sc, 2 sc in next sc. (6)
Rw 6: Ch 1, turn; 2 sc in next sc, sc in next 4 sc, 2 sc in next sc. (8)
Rw 7: Ch 1, turn; sc2tog, sc in next 4 sc, sc2tog. (6)
Rw 8: Ch 1, turn; sc2tog, sc in next 2 sc, sc2tog. (4)
Rw 9: Ch 1, turn; sc in each sc across. (4)
Rw 10: Ch 1, turn; sc2tog, sc2tog. (2)
Rw 11: working in front loops, sc in next sc, 2 sc in next sc, working in back loops, sc in next sc, 2 sc in next sc. (6)
Rd 12: (sc in next sc, sc2tog) around. (4)
Finish off leaving a long tail. Weave tail through sc of Rd 12, pull tightly and secure. Using black, embroider symbol on ULTRANECROZIUM Z CRYSTAL. Sew ULTRANECROZIUM Z CRYSTAL to top CENTER PLATE over center of logo adding a small amount of stuffing before closing. Weave in ends.
TOP EDGE OF CENTER PLATE:
Rw 1: Working through both thicknesses, attach white in the side of Rw 13, ch 2, sc in second ch from hook, sc in same Rw as attachment, sc in next 2 Rws, hdc in next 3 Rws, working in sc of Rw 13, (2 hdc, dc, 2 hdc) in next sc, hdc in next 3 Rws, sc in next 2 Rws, ch 2, sc in second ch from hook, slip st in same Rw as last sc.
Finish off. Weave in ends.
Z-Power Ring, Ultranecrozium Z Crystal, Team Rocket, Pokemon are copyright Nintendo and their respective creators.
This pattern is an original pattern and is © by Christjan Bee (July 2021). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint it on your site. You may keep a copy for your own personal use, but you may not sell or distribute it, or sell items made from this pattern.
Rw 2: (sc in next sc, sc2tog) around. (4)
Rw 3: Flatten and working through both thicknesses, ch 1, 2 sc in next 2 sc. (4)
Rw 4: Ch 1, turn; sc in each sc across. (4)
Rw 5: Ch 1, turn; 2 sc in next sc, sc in next 2 sc, 2 sc in next sc. (6)
Rw 6: Ch 1, turn; 2 sc in next sc, sc in next 4 sc, 2 sc in next sc. (8)
Rw 7: Ch 1, turn; sc2tog, sc in next 4 sc, sc2tog. (6)
Rw 8: Ch 1, turn; sc2tog, sc in next 2 sc, sc2tog. (4)
Rw 9: Ch 1, turn; sc in each sc across. (4)
Rw 10: Ch 1, turn; sc2tog, sc2tog. (2)
Rw 11: working in front loops, sc in next sc, 2 sc in next sc, working in back loops, sc in next sc, 2 sc in next sc. (6)
Rd 12: (sc in next sc, sc2tog) around. (4)
Finish off leaving a long tail. Weave tail through sc of Rd 12, pull tightly and secure. Using black, embroider symbol on ULTRANECROZIUM Z CRYSTAL. Sew ULTRANECROZIUM Z CRYSTAL to top CENTER PLATE over center of logo adding a small amount of stuffing before closing. Weave in ends.
TOP EDGE OF CENTER PLATE:
Rw 1: Working through both thicknesses, attach white in the side of Rw 13, ch 2, sc in second ch from hook, sc in same Rw as attachment, sc in next 2 Rws, hdc in next 3 Rws, working in sc of Rw 13, (2 hdc, dc, 2 hdc) in next sc, hdc in next 3 Rws, sc in next 2 Rws, ch 2, sc in second ch from hook, slip st in same Rw as last sc.
Finish off. Weave in ends.
Z-Power Ring, Ultranecrozium Z Crystal, Team Rocket, Pokemon are copyright Nintendo and their respective creators.
This pattern is an original pattern and is © by Christjan Bee (July 2021). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint it on your site. You may keep a copy for your own personal use, but you may not sell or distribute it, or sell items made from this pattern.
No comments:
Post a Comment