Saturday, December 12, 2020

Z-POWER RING

In Pokemon Ultra Sun and Ultra Moon, the Z-Ring was replaced by the Z-Power Ring, which can use more Z-Moves than the original Z-Ring. Lunalium Z Crystal is included with this pattern.

MATERIALS:
Worsted Weight Yarn: White, black, pewter, and lavender
B crochet hook
Polyester fiberfill
Yarn Needle
Center Release Buckle

CENTER PLATE BOTTOM:
Rw 1: With black, ch 2, 3 sc in second ch from hook. (3)
Rw 2: Ch 1, turn; 2 sc in next sc, sc in next sc, 2 sc in next sc. (5)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next 3 sc, 2 sc in next sc. (7)
Rw 4: Ch 1, turn; 2 sc in next sc, sc in next 5 sc, 2 sc in next sc. (9)
Rw 5: Ch 1, turn; 2 sc in next sc, sc in next 7 sc, 2 sc in next sc. (11)
Rw 6: Ch 1, turn; 2 sc in next sc, sc in next 9 sc, 2 sc in next sc. (13)
Rws 7-13: Ch 1, turn; sc in each sc across. (13)
Rw 14: Ch 1, turn; sc2tog, sc in next 9 sc, sc2tog. (11)
Rw 15: Ch 1, turn; sc2tog, sc in next 7 sc, sc2tog. (9)
Rw 16: Ch 1, turn; sc3tog, sc in next 3 sc, sc3tog. (5)
Rw 17: Ch 1, turn; sc2tog, sc in next sc, sc2tog. (3)
Rw 18: Ch 1, turn; sc3tog. (1)
Finish off leaving a long tail. Sew top and bottom edges together. Weave in ends.

CENTER PLATE TOP:
Rw 1: With black, ch 2, 3 sc in second ch from hook. (3)
Rw 2: Ch 1, turn; 2 sc in next sc, sc in next sc, 2 sc in next sc. (5)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next 3 sc, 2 sc in next sc. (7)
Rw 4: Ch 1, turn; 2 sc in next sc, sc in next 5 sc, 2 sc in next sc. (9)
Rw 5: Ch 1, turn; 2 sc in next sc, sc in next 7 sc, 2 sc in next sc. (11)
Rw 6: Ch 1, turn; 2 sc in next sc, sc in next 9 sc, 2 sc in next sc. (13)
Rw 7: Ch 1, turn; sc in next 2 sc, change to white, sc in next 9 sc, change to black, sc in next 2 sc. (13)
Rw 8: Ch 1, turn; sc in next 3 sc, change to white, sc in next 6 sc, change to black, sc in next 4 sc. (13)
Rw 9: Ch 1, turn; sc in next 5 sc, change to white, sc in next 4 sc, change to black, sc in next 4 sc. (13)
Rw 10: Ch 1, turn; sc in next 5 sc, change to white, sc in next 4 sc, change to black, sc in next 4 sc. (13)
Rw 11: Ch 1, turn; sc in next 3 sc, change to white, sc in next 6 sc, change to black, sc in next 4 sc. (13)
Rw 12: Ch 1, turn; sc in next 2 sc, change to white, sc in next 9 sc, change to black, sc in next 2 sc. (13)
Rw 13: Ch 1, turn; sc in each sc across. (13)
Rw 14: Ch 1, turn; sc2tog, sc in next 9 sc, sc2tog. (11)
Rw 15: Ch 1, turn; sc2tog, sc in next 7 sc, sc2tog. (9)
Rw 16: Ch 1, turn; sc3tog, sc in next 3 sc, sc3tog. (5)
Rw 17: Ch 1, turn; sc2tog, sc in next sc, sc2tog. (3)
Rw 18: Ch 1, turn; sc3tog. (1)
Finish off leaving a long tail. Using pewter, embroider circle around “logo.” Sew bottom edges together. Weave in ends.

WRIST BOTTOM BAND (MAKE 2):
Rw 1: Attach black in the side of Rw 6 of bottom CENTER PLATE, ch 1, sc in same Rw as attachment, sc in next 2 Rws, sc2tog, sc in next 3 sc. (7)
Rws 2-15: Ch 1, turn; sc in each sc across. (7)
Finish off leaving a long tail.

WRIST TOP BAND PART 1 (MAKE 2):
Rw 1: Attach black in the side of Rw 6 of top CENTER PLATE, ch 1, sc in same Rw as attachment, sc in next 2 Rws, sc2tog, sc in next 3 sc. (7)
Rw 2: Ch 1, turn; sc in each sc across. (7)
Rw 3: Ch 1, turn; sc in next sc, (slip st in next sc, sc in next sc) 3 times.
Finish off leaving a long tail.

WRIST TOP BAND PART 2 (MAKE 4):
Rw 1: With black, ch 8, sc in second ch from hook, (slip st in next ch, sc in next ch) 3 times.
Rw 2: Ch 1, turn; sc in next 2 sc, sc in next 3 slip st, sc in next 2 sc. (7)
Rw 3: Ch 1, turn; sc in next sc, (slip st in next sc, sc in next sc) 3 times.
Finish off leaving a long tail.

WRIST TOP BAND PART 3 (MAKE 2):
Rw 1: With black, ch 8, sc in second ch from hook, (slip st in next ch, sc in next ch) 3 times. (7)
Rw 2: Ch 1, turn; sc in next 2 sc, sc in next 3 slip st, sc in next 2 sc. (7)
Rw 3: Ch 1, turn; sc in each sc across. (7)
Finish off leaving a long tail. Using graph below, sew WRIST TOP PIECES to WRIST BOTTOM BAND leaving a Rw between each of the pieces. Sew WRIST BAND to Center Release buckle. Weave in ends.


LUNALIUM Z CRYSTAL:
Rw 1: With lavender, 6 sc in magic ring. (6)
Rw 2: (sc in next sc, sc2tog) around. (4)
Rw 3: Flatten and working through both thicknesses, ch 1, 2 sc in next 2 sc. (4)
Rw 4: Ch 1, turn; sc in each sc across. (4)
Rw 5: Ch 1, turn; 2 sc in next sc, sc in next 2 sc, 2 sc in next sc. (6)
Rw 6: Ch 1, turn; 2 sc in next sc, sc in next 4 sc, 2 sc in next sc. (8)
Rw 7: Ch 1, turn; sc2tog, sc in next 4 sc, sc2tog. (6)
Rw 8: Ch 1, turn; sc2tog, sc in next 2 sc, sc2tog. (4)
Rw 9: Ch 1, turn; sc in each sc across. (4)
Rw 10: Ch 1, turn; sc2tog, sc2tog. (2)
Rw 11: working in front loops, sc in next sc, 2 sc in next sc, working in back loops, sc in next sc, 2 sc in next sc. (6)
Rd 12: (sc in next sc, sc2tog) around. (4)
Finish off leaving a long tail. Weave tail though sc of Rd 12, pull tightly and secure. Using black, embroider symbol on LUNALIUM Z CRYSTAL. Sew LUNALIUM Z CRYSTAL to top CENTER PLATE over center of logo adding a small amount of stuffing before closing. Weave in ends.

TOP EDGE OF CENTER PLATE:
Rw 1: Working through both thicknesses, attach white in the side of Rw 13, ch 2, sc in second ch from hook, sc in same Rw as attachment, sc in next 2 Rws, hdc in next 3 Rws, working in sc of Rw 13, (2 hdc, dc, 2 hdc) in next sc, hdc in next 3 Rws, sc in next 2 Rws, ch 2, sc in second ch from hook, slip st in same Rw as last sc.
Finish off. Weave in ends.

Z-Power Ring, Water Crystal, Pokemon are copyright Nintendo and their respective creators.

This pattern is an original pattern and is © by Christjan Bee (December 2020). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint it on your site. You may keep a copy for your own personal use, but you may not sell or distribute it, or sell items made from this pattern.

No comments:

Post a Comment