His vehicle mode on Cybertron was a Cybertronian sports car. When arriving to Earth Knock Out adapts the Earth vehicle mode of a modified bright red European sports car, called a 2010 Aston Martin One-77, with the inner part of his wheels painted a shiny gold color.
Knock Out is, essentially, the Decepticon's version of Ratchet. However, rather than being grumpy, Knock Out is cheeky, arrogant and very vain. He values his own appearance above everything else, including the welfare of his patients. When he was about to abandon the base, his greatest concern was taking along his best rotary buffer. He is also shown to not like losing very much.
Knock Out has a significant relationship with Breakdown. Knock Out was Breakout’s partner on the battlefield when he was alive.
The customer requested a 3-foot-tall Knock Out. It is easier to make a smaller version of Knock Out before designing the pattern for the 3-foot version. This is the smaller version of Knock Out. The larger pattern will be designed as soon as I get this one done. The customer that requested the 3-foot-tall Knock Out has also requested a 3-foot-tall version of Breakdown. The pattern for both sizes of Breakdown is coming soon.
MATERIALS:
Worsted weight yarn: Red, black, dusty grey, white, and wine.
B Crochet hook
Polyester fiberfill
Tapestry needle
2 hook and eye sets
Snaps
Buttons
4 gold 1-inch buttons.
Velcro
Glue
Chenille stems
Floral wire
TIRES (MAKE 4):
Rd 1: With black, 6 sc in magic ring. (6)
Rd 2: 2 sc in each sc around. (12)
Rd 3: (sc in next sc, 2 sc in next sc) around. (18)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around. (24)
Rd 5: Working in back loops only, sc in each sc around. (24)
Rds 6-7: sc in each sc around. (24)
Rd 8: Working in back loops only, (sc in next 2 sc, sc2tog) around. (18)
Rd 9: (sc in next sc, sc2tog) around. (12)
STUFF TIRES FIRMLY.
Rd 10: sc2tog around. (6)
Finish off leaving a long tail. Weave tail through sc of Rd 10, pull tightly and secure. Weave in ends.
WHEELWELLS (MAKE 2):
Rd 1: With wine, ch 2, 4 hdc in second ch from hook. (4)
Rd 2: Ch 1, turn; 2 hdc in each hdc around. (8)
Rd 3: Ch 1, turn; (hdc in next hdc, 2 hdc in next hdc) around. (12)
Rd 4: Ch 1, turn; (hdc in next 2 hdc, 2 hdc in next hdc) around. (16)
Rd 5: Ch 1, turn; working in back loops only, sc in each hdc around. (16)
Rds 6-7: Ch 1, turn; sc in each sc around. (16)
Finish off leaving a long tail. Using buttons, attach TIRES to WHEELWELLS.
BOTTOM OF FOOT (MAKE 2):
Rw 1: With red, ch 10, sc in second ch from hook and in each ch across. (9)
Rw 2: Ch 1, turn; sc in next 7 sc, sc2tog. (8)
Rw 3: Ch 1, turn; sc2tog, sc in next 6 sc. (7)
Finish off. Weave in ends.
BACK OF CAR (MAKE 2):
Rw 1: Attach wine in first sc of Rw 3 of BOTTOM OF FOOT, ch 1, sc in same sc as attachment, sc in next 6 sc, working in the side of Rws, sc in next 3 Rws. (10)
Rws 2-4: Ch 1, turn; sc in each sc across. (10) Change to red after Rw 4.
Rw 5: Ch 1, turn; sc in next 8 sc, change to wine, sc in next 2 sc. (10)
Rw 6: Ch 1, turn; sc in next 3 sc, change to red, sc in next 7 sc. (10)
Rw 7: Ch 1, turn; sc in next 4 sc, slip st in next sc. (4)
Finish off. Weave in ends.
FOOT INSIDE (MAKE 2):
Rw 1: With wine, ch 4, sc in second ch from hook and in each ch across. (3)
Rws 2-7: Ch 1, turn; sc in each sc across. (3)
Rw 8: Ch 1, turn; sc in next sc, slip st in next sc. (1)
Finish off leaving a long tail. Sew FOOT INSIDE to BACK OF CAR and BOTTOM OF FOOT. Weave in ends.
TOP OF FOOT AND BOTTOM OF LEGS (MAKE 4):
Rw 1: With wine, ch 10, sc in second ch from hook and in each ch across. (9)
Rws 2-6: Ch 1, turn; sc in each sc across. (9)
Rw 7: Ch 1, turn; sc in next 6 sc, sc2tog. (7)
Rw 8: Ch 1, turn; sc2tog, sc in next 5 sc. (6)
Finish off leaving a long tail. Using buttons, attach TOP OF FOOT and BOTTOM OF LEGS together. Sew TOP OF FOOT to FOOT INSIDE, BACK OF CAR, and BOTTOM OF FOOT. Weave in ends. Sew snap in place. Stuff FOOT firmly.
TRUNK TOP (MAKE 2):
Rw 1: With wine, ch 8, sc in second ch from hook, sc in next 5 ch, 2 sc in next ch. (8)
Rw 2: Ch 1, turn; 2 sc in next sc, sc in next 7 sc. (9)
Rw 3: Ch 1, turn; sc in next 6 sc, 2 sc in next sc, sc in next 2 sc. (10)
Finish off leaving a long tail. Sew TRUNK TOP to FOOT pieces. Weave in ends.
CAR OUTSIDE OF LEGS (MAKE 2):
Rw 1: Attach wine in the side of Rw 4 of BOTTOM OF LEGS, ch 1, sc together same Rw as attachment and next Rw, sc in next Rw, working in sc of Rw 6 of BOTTOM OF LEGS, sc in next 2 sc, change to red, working in the side of Rw, sc in next 2 Rws, change to wine, working in sc of Rw 8 of BOTTOM OF LEGS, sc in next 6 sc. (12) Change to black.
Rw 2: Ch 1, turn; sc in next 5 sc, change to wine, sc in next sc, change to red, sc in next 2 sc, change to wine, sc in next 2 sc, sc2tog. (11)
Rw 3: Ch 1, turn; sc in next 3 sc, change to red, sc in next sc, 2 sc in next sc, change to wine, sc in next sc, change to black, sc in next 5 sc. (12)
Rw 4: Ch 1, turn; sc in next 5 sc, change to wine, sc in next sc, change to red, sc in next 3 sc, change to wine, sc in next 3 sc. (12)
Rw 5: Ch 1, turn; sc in next 3 sc, change to red, sc in next 2 sc, 2 sc in next sc, change to wine, sc in next sc, change to black, sc in next 5 sc. (13)
Rw 6: Ch 1, turn; sc in next 5 sc, change to wine, sc in next sc, change to red, sc in next 4 sc, change to wine, sc in next 3 sc. (13)
Rw 7: Ch 1, turn; 2 sc in next sc, sc2tog, change to red, 2 sc in next sc, sc in next 3 sc, change to wine, sc in next sc, change to black, sc in next 5 sc. (14)
Rw 8: Ch 1, turn; sc in next 5 sc, change to wine, sc in next sc, change to black, sc in next sc, change to red, sc in next 4 sc, change to wine, sc in next 2 sc, 2 sc in next sc. (15)
Rw 9: Ch 4, sc in second ch from hook, sc in next 2 ch, sc in next 4 sc, change to red, sc in next 3 sc, change to black, sc in next 2 sc, change to wine, sc in next 6 sc. (18)
Rw 10: Ch 1, turn; working over chenille stem, sc in next 6 sc, change to black, sc in next 3 sc, change to red, sc in next 2 sc, change to wine, sc in next 7 sc. (18)
Finish off. Weave in ends. Sew WHEELWELL in place.
LEG INSIDES (MAKE 2):
Rw 1: With red, ch 7, sc in second ch from hook and in each ch across. (6)
Rws 2-9: Ch 1, turn; sc in each sc across. (6)
Finish off. Sew LEG INSIDES to WHEELWELLS and CAR OUTSIDE OF LEGS. Weave in ends.
LEG SIDES (MAKE 2):
Rw 1: With red, ch 7, sc in second ch from hook and in each ch across. (6)
Rws 2-8: Ch 1, turn; sc in each sc across. (6)
Rw 9: Ch 1, turn; sc in next 3 sc, slip st in next sc. (3)
Finish off leaving a long tail. Sew LEG SIDES to LEG BOTTOMS and CAR OUTSIDE OF LEGS. Sew snaps in place. Weave in ends.
LOWER LEG FRONTS (MAKE 2):
Rw 1: With red, ch 7, sc in second ch from hook and in each ch across. (6)
Rws 2-6: Ch 1, turn; sc in each sc across. (6)
Finish off leaving a long tail. Sew LOWER LEG FRONTS to LEGS stuffing firmly before closing. Weave in ends.
TOE BOTTOMS (MAKE 2):
Rw 1: With black, ch 2, sc in second ch from hook. (1)
Rw 2: Ch 1, turn; 2 sc in next sc. (2)
Rw 3: Ch 1, turn; sc in each sc across. (2)
Rw 4: Ch 1, turn; 2 sc in next sc, sc in next sc. (3)
Rw 5: Ch 1, turn; sc in each sc across. (3)
Rw 6: Ch 1, turn; sc in next 2 sc, 2 sc in next sc. (4)
Rw 7: Ch 1, turn; sc in each sc across. (4)
Rw 8: Ch 1, turn; 2 sc in next sc, sc in next 3 sc. (5)
Rws 9-10: Ch 1, turn; sc in each sc across. (5)
Finish off. Sew snap in place.
TOE CAPS (MAKE 6):
Rd 1: With black, ch 3, sc in second ch from hook, 4 sc in next ch working around ch, working in free loops of foundation ch, sc in next ch. (6)
Rd 2: Ch 1, turn; sc in next sc, 2 sc in next 4 sc, sc in next sc. (10)
Finish off leaving a long tail. Using buttons, attach to TOE CAPS together. Sew 1 TOE CAP to TOE BOTTOM. Sew 1 TOE CAP to LEGS. Weave in ends.
TOE TOPS (MAKE 2):
Rw 1: With black, ch 2, 2 sc in second ch from hook. (2)
Rw 2: Ch 1, turn; sc in each sc across. (2)
Rw 3: Ch 1, turn; 2 sc in next 2 sc. (4)
Rw 4: Ch 1, turn; sc in each sc across. (4)
Rw 5: Ch 1, turn; 2 sc in next sc, sc in next 2 sc, 2 sc in next sc. (6)
Rw 6: Ch 1, turn; sc in each sc across. (6)
Rw 7: Ch 1, turn; 2 sc in next sc, sc in next 4 sc, 2 sc in next sc. (8)
Rw 8: Ch 1, turn; sc in each sc across. (8)
Rw 9: Ch 1, turn; 2 sc in next sc, sc in next 6 sc, 2 sc in next sc. (10)
Rw 10: Ch 1, turn; sc in each sc across. (10)
Finish off leaving a long tail. Sew TOE TOP to TOE CAP and TOE BOTTOM stuffing before closing. Weave in ends.
TOE SUPPORT TOPS (MAKE 2):
Rw 1: With black, ch 11, sc in second ch from hook and in each ch across. (10)
Rws 2-3: Ch 1, turn; sc in each sc across. (10)
Finish off leaving a long tail. Sew TOE SUPPORT TOP to 2 TOE CAPS. Weave in ends.
TOE SUPPORT BOTTOMS (MAKE 2):
Rw 1: With black, ch 6, sc in second ch from hook and in each ch across. (5)
Rws 2-3: Ch 1, turn; sc in each sc across. (5)
Finish off leaving a long tail. Sew TOE SUPPORT BOTTOMS to TOE SUPPORT pieces stuffing before closing. Weave in ends.
UPPER LEG (MAKE 2):
Rw 1: With red, ch 16, sc in second ch from hook and in each ch across. (15)
Rws 2-6: Ch 1, turn; sc in each sc across. (15)
Rw 7: Ch 1, turn; sc2tog, sc in next 11 sc, sc2tog. (13)
Rws 8-9: Ch 1, turn; sc in each sc across. (13)
Rw 10: Ch 1, turn; sc2tog, sc in next 2 sc, sc2tog, sc in next sc, sc2tog, sc in next 2 sc, sc2tog. (9)
Rws 11-12: Ch 1, turn; sc in each sc across. (9)
Finish off. Weave in ends. Sew UPPER LEG to LOWER LEG. Attach wooden dowel to inside center of UPPER LEG. Weave in ends.
KNEE GUARDS (MAKE 2):
Rd 1: With red, ch 7, sc in second ch from hook, sc in next 4 ch, (sc, hdc, sc) in next ch working around ch, working in free loops of foundation ch, sc in next 4 ch, 2 sc in next ch. (14)
Finish off leaving a long tail. Sew KNEE GUARDS to UPPER LEGS
THIGHS (MAKE 2):
Rd 1: With dusty grey, ch 2, 4 sc in second ch from hook working around ch. (4)
Rd 2: 2 sc in each sc around. (8)
Rds 3-16: sc in each sc around. (8)
STUFF THIGHS FIRMLY.
Rd 17: sc2tog around. (4)
Finish off leaving a long tail. Weave tail through sc of Rd 17, pull tightly and secure. Weave in ends. Using red buttons, attach THIGHS to UPPER LEGS. Weave in ends.
WINDOW MOUNT (MAKE 2):
Rw 1: With dusty grey, ch 11, working over chenille stem with 4 inches on each side, sc in second ch from hook, sc in next 9 ch. (10)
Finish off leaving a long tail.
INSIDE WINDOW (MAKE 2):
Rw 1: With dusty grey, ch 4, sc in second ch from hook and in each ch across. (3)
Rws 2-8: Ch 1, turn; sc in each sc across. (3)
Rw 9: Ch 1, turn; sc2tog, sc in next sc. (2)
Rw 10: Ch 1, turn; sc in each sc across. (2)
Rw 11: Ch 1, turn; sc2tog. (1)
Rw 12: Ch 1, turn; sc in next sc, working in the side of Rws, sc in next 3 Rws, 2 sc in next Rw, sc in next 7 Rws.
Finish off. Sew INSIDE WINDOWS to WINDOW MOUNTS. Weave in ends. Sew snap on INSIDE WINDOWS.
CAR DOORS (MAKE 2):
Rw 1: With black, ch 12, sc in second ch from hook, sc in next 2 ch, change to red, sc in next 2 ch, change to wine, sc in next 6 ch. (11)
Rw 2: Ch 1, turn; sc in next 6 sc, change to red, sc in next 2 sc, change to black, sc in next 3 sc. (11)
Rw 3: Ch 1, turn; sc in next 3 sc, change to red, sc in next 2 sc, change to wine, sc in next 6 sc. (11)
Rw 4: Ch 1, turn; sc in next 6 sc, change to red, sc in next 2 sc, change to black, sc in next 3 sc. (11)
Rw 5: Ch 1, turn; sc in next 3 sc, change to red, sc in next 2 sc, change to wine, sc in next 6 sc. (11)
Rw 6: Ch 1, turn; sc in next 6 sc, change to red, sc in next 2 sc, change to black, sc in next 3 sc. (11)
Rw 7: Ch 1, turn; sc in next 3 sc, change to red, sc in next 2 sc, change to gray, sc in next 2 sc, change to wine, sc in next 4 sc. (11)
Rw 8: Ch 1, turn; sc in next 3 sc, change to gray, sc in next 3 sc, change to red, sc in next 2 sc, change to black, sc in next 3 sc. (11)
Rw 9: Ch 1, turn; sc2tog, sc in next sc, change to red, sc in next 3 sc, change to gray, sc in next 3 sc, change to wine, sc in next 2 sc. (10)
Rw 10: Ch 1, turn; sc in next sc, change to gray, sc in next 3 sc, change to red, sc in next 4 sc, change to black, sc in next 2 sc. (10)
Rw 11: Ch 1, turn; sc2tog, change to red, sc in next 4 sc, change to gray, sc in next 4 sc. (9)
Rw 12: Ch 1, turn; working over chenille stem on side of WINDOW MOUNTS, sc in next 4 sc, change to red, sc in next 3 sc, stop working over chenille stem on side of WINDOW MOUNTS, working over chenille stem, sc in next sc, change to wine, working over sc in next sc, working in the side of Rws, sc in next 3 Rws, 2 sc in next Rw, sc in next 6 Rw, 3 sc in corner of window, working in free loops of foundation ch, sc in next 2 ch, change to red, sc in next ch, working over chenille stem on side of WINDOW MOUNTS, sc in next ch, change to wine, sc in next 6 ch.
Finish off. Weave in ends.
CAR WINDSHIELD AND TOP (MAKE 2):
WEAVE CHENILLE STEM AS YOU GO.
Rw 1: With black, ch 10, sc in second ch from hook and in each ch across. (9)
Rw 2: Ch 1, turn; sc2tog, sc in next 7 sc. (8)
Rw 3: Ch 1, turn; sc in next 6 sc, sc2tog. (7)
Rw 4: Ch 1, turn; sc2tog, sc in next 5 sc. (6)
Rw 5: Ch 1, turn; sc in next 4 sc, sc2tog. (5) Change to wine.
Rws 6-14: Ch 1, turn; sc in each sc across. (5)
Finish off. Weave in ends.
TOP CONNECTING BAR:
Rw 1: With wine, ch 4, sc in second ch from hook and in each ch across. (3)
Rw 2: Ch 6, working in free loops of foundation ch, sc in next 3 ch. (3)
Finish off. Weave in ends. Using button, sew CONNECTING BAR to CAR WINDSHIELD AND TOP. Sew button on other CAR WINDSHIELD AND TOP that corresponds to CONNECTING BAR.
SIDE CONNECTING BARS (MAKE 2):
Rw 1: With black, ch 6, sc in second ch from hook and in each ch across. (5)
Finish off leaving a long tail. Sew SIDE CONNECTING BAR to CAR OUTSIDE OF LEGS. Sew snap to SIDE CONNECTING BAR and corresponding place on INSIDE WINDOW. Weave in ends.
SIDE MIRRORS (MAKE 2):
Rd 1: With red, ch 2, 4 sc in second ch from hook working around ch. (4)
Rd 2: sc in next 2 sc, 2 sc in next sc, sc in next sc. (5)
Finish off leaving a long tail. Sew SIDE MIRRORS to CAR DOORS. Weave in ends.
HANDS (MAKE 2):
Rd 1: With dusty grey, 6 sc in magic ring. (6)
Rd 2: (sc in next 2 sc, 2 sc in next sc) around. (8)
Rds 3-4: sc in each sc around. (8)
Rd 5: 3 sc in next 2 sc, sc in next 6 sc. (12)
Rd 6: sc in each sc around. (12)
Rd 7: (sc3tog) twice, sc in next 6 sc. (8)
Rds 8-10: sc in each sc around. (8)
STUFF HANDS FIRMLY.
Rd 11: Working in back loops only, (sc in next 2 sc, sc2tog) around. (6)
Finish off leaving a long tail. Weave tail through sc of Rd 11, pull tightly and secure. Using black, attach HANDS to windshield section of CAR WINDSHIELD AND TOP. Weave in ends.
ARM PIECE 1 (MAKE 2):
Rd 1: With dusty grey, ch 6, sc in second ch from hook, sc in next 3 ch, 4 sc in next ch working around ch, working in free loop of foundation ch, sc in next 4 ch. (12)
Finish off. Sew ARM PIECE 1 to CAR DOORS. Weave in ends.
ARM PIECE 2 (MAKE 2):
Rd 1: With dusty grey, 6 sc in magic ring. (6)
Rd 2-9: sc in each sc around. 6)
Finish off leaving a long tail. Stuff ARM PIECE 2 firmly. Weave tail through sc of Rd 9, pull tightly and secure. Using buttons, attach ARM PIECE 2 to ARM PIECE 1. Weave in ends. Glue Velcro to ARM PIECE 1 over button and to inside of CAR DOOR.
ARM PIECE 3 (MAKE 2):
Rd 1: With dusty grey, 6 sc in magic ring. (6)
Rds 2-3: sc in each sc around. (6)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around. (8)
Rds 5-6: sc in each sc around. (8)
Finish off. Weave in ends. Stuff ARM PIECE 3 firmly.
ARM PIECE 3 AND 4 CAP (MAKE 4):
Rw 1: With dusty grey, ch 3, sc in second ch from hook and in next ch. (2)
Rw 2: Ch 1, turn; sc in each sc across. (2)
Finish off leaving a long tail. Using button, attach ARM PIECE 3 CAP and ARM PIECE 4 CAP together. Sew ARM PIECE 3 CAP to ARM PIECE 3. Using buttons, attach ARM PIECE 3 to ARM PIECE 2. Weave in ends.
ARM PIECE 4 (MAKE 2):
Rw 1: With dusty grey, ch 3, sc in second ch from hook and in next ch. (2)
Rw 2: Ch 1, turn; sc in each sc across. (2)
Rd 3: Ch 1, even sc around outside edge. (8)
Rds 4-6: sc in each sc around. (8)
Finish off. Weave in ends. Stuff ARM PIECE 4 firmly. Sew ARM PIECE 4 to ARM PIECE CAP 4. Weave in ends.
ARM WING MOUNTS (MAKE 2):
Rd 1: With dusty grey, ch 11, 2 sc in second ch from hook, sc in next 8 ch, 4 sc in next ch working around ch, working in free loops of foundation ch, sc in next 8 ch, 2 sc in next ch, slip st in first sc. (24)
Finish off. Weave in ends.
ARM WINGS (MAKE 4):
Rw 1: With dusty grey, ch 2, sc in second ch from hook. (1)
Rw 2: Ch 1, turn; 2 sc in next sc. (2)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next sc. (3)
Rw 4: Ch 1, turn; 2 sc in next sc, sc in next 2 sc. (4)
Rw 5: Ch 1, turn; sc in each sc across. (4)
Finish off leaving a long tail. Sew 2 ARM WINGS to each ARM WING MOUNT. Using buttons, attach ARMS WINGS to ARM PIECE 3. Weave in ends.
BODY:
Rd 1: With red, 6 sc in magic ring. (6)
Rd 2: 2 sc in each sc around. (12)
Rd 3: Working in back loops only, sc in each sc around. (12)
Rds 4-11: sc in each sc around. (12) Change to dusty grey after Rd 11.
Rd 12: (sc in next 5 sc, 2 sc in next sc) around. (14)
Rds 13-16: sc in each sc around. (14)
Rd 17: (sc in next 6 sc, 2 sc in next sc) around. (16)
Rds 18-20: sc in each sc around. (16)
Finish off. Weave in ends. Stuff BODY firmly.
BODY CAP:
Rw 1: With dusty grey, ch 6, sc in second ch from hook and in each ch across. (5)
Rws 2-3: Ch 1, turn; sc in each sc across. (5)
Finish off leaving a long tail. Sew BODY CAP to BODY adding stuffing needed to achieve shape. Weave in ends.
BODY WINGS (MAKE 2):
Rw 1: With dusty grey, ch 5, working over floral wire, sc in second ch from hook and in each ch across. (4)
Rw 2: Ch 1, turn; slip st in next sc, sc in next 3 sc.
Finish off leaving a long tail. Sew BODY WINGS to BODY. Weave in ends. Sew snaps on BODY WINGS and on HANDS.
SILVER FRONT QUARTER PANEL PIECE (MAKE 2):
Rw 1: With gray, ch 6, sc in second ch from hook and in each ch across. (5)
Rws 2-3: Ch 1, turn; sc in each sc across. (3)
Finish off leaving a long tail.
FRONT WHEEL MOUNT BACK (MAKE 2):
Rd 1: With dusty grey, ch 12, working over floral wire, 2 sc in second ch from hook, sc in next 9 ch, 4 sc in next ch working around ch, working in free loops of foundation ch, sc in next 9 ch, 2 sc in next ch, slip st in first sc.
Finish off. Weave in ends.
FRONT WHEEL MOUNT FRONT (MAKE 2):
Rd 1: With dusty grey, ch 5, sc in second ch from hook, sc in next 2 ch, 4 sc in next ch working around ch, working in free loops of foundation ch, sc in next 3 ch. (10)
Finish off. Weave in ends.
FRONT WHEEL MOUNT TOP (MAKE 2):
Rw 1: With dusty grey, ch 4, sc in second ch from hook and in each ch across. (3)
Rws 2-10: Ch 1, turn; sc in each sc across. (3)
Finish off leaving a long tail. Sew FRONT WHEEL MOUNT TOP to FRONT WHEEL MOUNT FRONT. Weave in ends.
FRONT WHEEL MOUNT CAP (MAKE 2):
Rw 1: With dusty grey, ch 4, sc in second ch from hook and in each ch across. (3)
Rws 2-3: Ch 1, turn; sc in each sc across. (3)
Finish off leaving a long tail. Sew FRONT WHEEL MOUNT pieces together stuffing before closing. Using buttons, attach TIRES to FRONT WHEEL MOUNTS. Weave in ends.
CONNECTING STRAP (MAKE 2):
With gray, ch 8, finish off leaving a long tail. Sew CONNECTING STRAP to FRONT WHEEL MOUNT TOP. Sew button to CAR DOOR to correspond to CONNECTING STRAP.
SHOULDERS (MAKE 2):
Rd 1: With dusty grey, ch 2, 4 sc in second ch from hook working around ch. (4)
Rd 2: 2 sc in each sc around. (8)
Rds 3-6: sc in each sc around. (8)
Finish off leaving a long tail. Stuff SHOULDERS firmly.
UNDERHOOD ARMS (MAKE 2):
Rd 1: With dusty grey, ch 13, working over floral wire, 2 sc in second ch from hook, sc in next 5 ch, sc3tog, sc in next ch, 4 sc in next ch working around ch, working in free loops of foundation ch, sc in next 2 ch, 3 sc in next ch, sc in next 6 ch, 2 sc in next ch, slip st in first sc.
Finish off. Sew UNDERHOOD ARMS to SHOULDERS. Weave in ends. Using buttons, attach SHOULDERS to FRONT WHEEL MOUNT.
HOOD SUPPORTS (MAKE 2):
Rd 1: With wine, ch 6, sc in second ch from hook, sc in next 3 ch, 4 sc in next ch working around ch, working in free loops of foundation ch, sc in next 4 ch. (12)
Finish off leaving a long tail. Using buttons, attach HOOD SUPPORTS to UNDERHOOD ARMS.
FRONT WHEELWELLS (MAKE 2):
Rw 1: With red, ch 5, 2 sc in second ch from hook sc in next 2 ch, 2 sc in next ch. (6)
Rw 2: Ch 1, turn; 2 sc in next sc, sc in next 4 sc, 2 sc in next sc. (8)
Rw 3: Ch 1, turn; sc in each sc across. (8)
Rw 4: Working in the side of Rws, ch 1, sc in next 2 Rws, 2 sc in next Rw, working in free loops of foundation ch, sc in next 4 ch, 2 sc in next Rw, sc in next 2 Rws. (12)
Rws 5-6: Ch 1, turn; sc in each sc around. (12)
Finish off leaving a long tail.
HOOD PIECE 1 (MAKE 2):
Rw 1: With wine, ch 5, sc in second ch from hook, change to red, sc in next 3 ch. (4)
Rw 2: Ch 1, turn; 2 sc in next sc, sc in next sc, change to wine, sc2tog. (4)
Rw 3: Ch 1, turn; sc in next sc, change to red, sc in next 3 sc. (4)
Rw 4: Ch 1, turn; sc in next 3 sc, change to wine, sc in next sc. (4)
Rw 5: Ch 1, turn; sc in next 2 sc, change to red, sc in next 2 sc. (4)
Rw 6: Ch 1, turn; sc in next 2 sc, change to wine, sc2tog. (3)
Rw 7: Ch 1, turn; sc in next sc, change to red, sc in next 2 sc. (3)
Rw 8: Ch 1, turn; sc in next 2 sc, change to wine, sc in next sc. (3)
Rw 9: Ch 1, turn; sc in next sc, change to red, sc in next 2 sc. (3)
Rw 10: Ch 1, turn; sc in next 2 sc, change to wine, sc in next sc. (3)
Rw 11: Ch 1, turn; sc in next sc, change to red, sc in next 2 sc. (3)
Rw 12: Ch 1, turn; sc in next 2 sc, change to wine, sc in next sc. (3)
Rw 13: Ch 1, turn; 2 sc in next sc, sc in next sc, change to red, sc in next sc. (4)
Rw 14: Ch 1, turn; sc in next sc, change to wine, sc in next 2 sc, 2 sc in next sc. (5)
Rw 15: Ch 1, turn; sc in next 4 sc, change to red, sc in next sc. (5)
Rw 16: Ch 1, turn; sc in next sc, change to wine, sc in next 4 sc. (5)
Finish off. Weave in ends.
FRONT QUARTER PANEL (MAKE 2):
Rw 1: Attach red in the side of Rw 16 of HOOD PIECE 1, ch 1, working in the side of Rws, working over chenille stem, 2 sc in next Rw, sc in next 13 Rws, 2 sc in next Rw, change to white, sc in next Rw, working in free loop of foundation ch, sc in next 3 ch, change to wine, sc in next ch. (22)
Rw 2: Ch 1, turn; sc in next sc, change to red, sc in next 21 sc. (22)
LEFT SIDE:
Rw 3: Ch 1, turn; sc in next 6 sc, sc2tog. (7)
Rw 4: Ch 1, turn; sc2tog, sc in next 5 sc. (6) Change to gray.
Rw 5: Ch 1, turn; sc in next 4 sc, sc2tog. (5)
Finish off. Weave in ends.
RIGHT SIDE:
Rw 3: With right side facing, attach wine in first sc, ch 1, sc in next sc, change to red, sc in next 7 sc, sc2tog. (9)
Rw 4: Ch 1, turn; sc2tog, sc in next sc, sc2tog. (3)
Rw 5: Ch 1, turn; sc in next sc, sc2tog. (2)
Finish off. Sew FRONT WHEELWELLS to FRONT QUARTER PANEL. Sew FRONT QUARTER PANEL to SHOULDERS. Run yarn through BODY, SHOULDERS, and FRONT QUARTER PANEL.
HOOD PIECE 2:
Rw 1: With wine, ch 9, working over chenille stem, sc in second ch from hook and in each ch across. (8)
LEFT SIDE:
WEAVE CHENILLE STEM THROUGHOUT LEFT SIDE.
Rw 2: Ch 1, turn; 2 sc in next sc, sc in next sc. (3)
Rws 3-5: Ch 1, turn; sc in each sc across. (3)
Rw 6: Ch 1, turn; 2 sc in next sc, sc2tog. (3)
Rws 7-12: Ch 1, turn; sc in each sc across. (3)
Rw 13: Ch 1, turn; sc3tog. (1)
Finish off. Weave in ends.
RIGHT SIDE:
WEAVE CHENILLE STEM THROUGHOUT RIGHT SIDE.
Rw 2: With right side facing, attach wine, ch 1, 2 sc in next sc, sc in next sc. (3)
Rws 3-5: Ch 1, turn; sc in each sc across. (3)
Rw 6: Ch 1, turn; 2 sc in next sc, sc2tog. (3)
Rws 7-12: Ch 1, turn; sc in each sc across. (3)
Rw 13: Ch 1, turn; sc3tog. (1)
Finish off. Sew HOOD PIECE 2 to HOOD SUPPORTS. Weave in ends.
NOSE OF CAR:
Rw 1: Working in free loops of foundation ch of HOOD PIECE 2, ch 1, sc in same ch as attachment, sc in next 7 ch. (8)
Rws 2-3: Ch 1, turn; sc in each sc across. (8)
Finish off leaving a long tail.
HOOD PIECE 3:
Rw 1: Working in unworked sc of HOOD PIECE 2, attach wine in first unworked sc, ch 1, sc in same sc as attachment, sc in next 3 sc. (4)
Rws 2-4: Ch 1, turn; sc in each sc across. (4)
Rw 5; Ch 1, turn; 2 sc in next sc, sc in next 2 sc, 2 sc in next sc. (6)
Rws 6-11: Ch 1, turn; sc in each sc across. (6)
Rw 12: Ch 1, turn; 2 sc in next sc, sc in next 4 sc, 2 sc in next sc. (8)
Rws 13-15: Ch 1, turn; sc in each sc across. (8)
Finish off leaving a long tail.
GRILL:
Rw 1: With black, ch 19, 2 sc in second ch from hook, sc in next 16 ch, 2 sc in next ch. (20)
Rws 2-5: Ch 1, turn; sc in each sc across. (20)
Finish off. Weave in ends. Attach hook and eye set to each side of GRILL and corresponding place on FRONT QUARTER PANEL.
FRONT GRILL SIDE (MAKE 2):
Rw 1: With red, ch 3, sc in second ch from hook and in next ch. (2)
Rws 2-3: Ch 1, turn; sc in each sc across. (2)
Finish off leaving a long tail. Sew FRONT GRILL SIDES to GRILL. Weave in ends.
CENTER SPLITTER:
Rw 1: With red, ch 9, sc in second ch from hook and in each ch across. (8)
Rw 2: Ch 1, turn; holding next sc on CENTER SPLITTER and sc #7 on GRILL together and working through both thicknesses, working over chenille stem, sc in next 8 sc. (8)
Finish off. Weave in ends.
SPLITTER SIDES (MAKE 2):
Rw 1: With red, ch 8, sc in second ch from hook and in each ch across. (7)
RIGHT SPLITTER SIDE:
Rw 2: Ch 1, turn; holding next sc on RIGHT SPLITTER SIDE and sc #6 on GRILL together and working through both thicknesses, working over chenille stem, sc in next 3 sc, 2 sc in next 2 sc, sc in next 2 sc.
Finish off. Weave in ends.
LEFT SPLITTER SIDE:
Rw 2: Ch 1, turn; holding next sc on LEFT SPLITTER SIDE and first sc on FRONT GRILL SIDE together and working through both thicknesses, working over chenille stem, sc in next 2 sc, working in sc of GRILL, 2 sc in next 2 sc, sc in next 3 sc.
Finish off. Weave in ends.
HIP COVER:
Rw 1: With red, ch 9, sc in second ch from hook and in each ch across. (8)
Rw 2: Ch 1, turn; sc in each sc across. (8)
Rw 3: Ch 1, turn; sc2tog, sc in next 4 sc, sc2tog. (6)
Rw 4: Ch 1, turn; sc2tog, sc in next 2 sc, sc2tog. (4)
Rws 5-6: Ch 1, turn; sc in each sc across. (4)
Finish off. Sew HIP COVER to CENTER SPLITTER. Weave in ends.
HEAD MOUNT:
Rw 1: With dusty grey, ch 5, sc in second ch from hook and in each ch across. (4)
Rws 2-5: Ch 1, turn; sc in each sc across. (6)
Rd 6: Ch 1, working in the side of Rws, working over chenille stem, sc in next 4 Rws, 3 sc in corner, working in free loops of foundation ch, sc in next 2 ch, 3 sc in corner, working in the side of Rws, sc in next 4 Rws.
Rw 7: Ch 1, working in the side of Rd 6, sc in next Rd, sc in next 4 of Rw 5, sc in next Rd. (6)
Rws 8-12: Ch 1, turn; sc in each sc across. (6)
Finish off. Sew snap on HEAD MOUNT and corresponding position on BODY. Weave in ends.
HEAD:
Rd 1: With gray, 8 sc in magic ring. (8)
Rd 2: 2 sc in each sc around. (16)
Rd 3: (sc in next 3 sc, 2 sc in next sc) around. (20)
Rds 4-10: sc in each sc around. (20)
Rd 11: sc in next 3 sc, sc2tog, sc in next 3 sc, 2 sc in next 2 sc, sc in next 3 sc, sc2tog, sc in next 3 sc. (20)
Rd 12: (sc in next sc, sc2tog) 3 times, sc in next 2 sc, (sc2tog, sc in next sc) 3 times. (14)
Finish off. Weave in ends. Stuff HEAD firmly.
BOTTOM OF HEAD:
Rd 1: With gray, 7 sc in magic ring. (7)
Rd 2: 2 sc in next 3 sc, 2 hdc in next sc, 2 sc in next 3 sc. (14)
Finish off leaving a long tail. Sew BOTTOM OF HEAD to HEAD. Sew HEAD to HEAD MOUNT. Weave in ends.
EYES, EYEBROWS, AND MOUTH:
Using red, embroider EYES on HEAD. Using black, embroider EYEBROWS and MOUTH on HEAD.
HELMET:
Rd 1: With red, 8 sc in magic ring. (8)
Rd 2: 2 sc in each sc around. (16)
Rd 3: (sc in next sc, 2 sc in next sc) around. (24)
Rds 4-6: sc in each sc around. (24)
Rd 7: slip st in next sc, ch 4, sc in second ch from hook, hdc in next 2 ch, slip st in next 4 sc, (slip st, ch 1, sc) in next sc, sc in next 13 sc.
Rd 8: Ch 1, turn; sc in each sc across. (14)
Rd 9: Ch 1, turn; 2 sc in next sc, sc in next 12 sc, 2 sc in next sc. (16)
Rd 10: Ch 1, turn; 2 sc in next sc, sc in next 14 sc, 2 sc in next sc. (18)
Rws 11-13: Ch 1, turn; sc in each sc across. (18)
Finish off. Weave in ends. Sew HELMET on HEAD. Weave in ends. Using white, embroider square on forehead.
HELMET POINT:
Rd 1: With red, ch 2, 4 sc in second ch from hook working around ch. (4)
Rds 2-4: sc in each sc around. (4)
Rd 5: 2 sc in each sc around. (8)
Finish off leaving a long tail. Sew HELMET POINT to HELMET. Weave in ends.
SMALL HELMET WINGS (MAKE 2):
Rw 1: With red, ch 6, slip st in second ch from hook, sc in next 4 ch, ch 2, sc in second ch from hook, slip st in same ch as last sc before ch-2.
Finish off leaving a long tail. Sew SMALL HELMET WINGS to HELMET. Weave in ends.
LARGE HELMET WINGS (MAKE 2):
Rw 1: With red, ch 8, slip st in second ch from hook, sc in next 6 sc, ch 2, sc in second ch from hook, slip st in same ch as last sc before ch-2.
Finish off leaving a long tail. Sew LARGE HELMET WING to HELMET. Weave in ends.
EARS (MAKE 2):
Rw 1: With white, ch 3, sc in second ch from hook and in next ch. (2)
Finish off leaving a long tail. Sew EARS to HELMET. Weave in ends.
INSTRUCTIONS TO TRANSFORM FROM ROBOT TO CAR:
I did my best to have this version of Knock Out transformed like this toy version.
Knockout and Transformers are copyright Hasbro, Inc. and their respective creators.
This crochet pattern is an original pattern and is © by Christjan Bee (July 2023). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use; but you may not sell or distribute it, or sell items made from this pattern.
No comments:
Post a Comment