GERALT OF RIVIA (THE WITCHER)

This is an adaptation of my male doll to make a doll of Geralt of Rivia from the Netflix movie called The Witcher. The Witcher is a Polish-American Fantasy drama web television series produced by Lauren Schmidt Hissrich. It is based on the book series of the same name by Polish writer Andrzej Sapkowski. The series stars Henry Cavill as Geralt of Rivia. I will admit that making Geralt of Rivia was not easy. There are a lot of detail pieces on him. B crochet hook is only used on the WOLF NECKLACE MEDALLION.

MATERIALS:
Worsted weight yarn: buff, white, gold, black, charcoal, gray, coffee, café latte, and red.
E and B Crochet hook
Polyester fiberfill
Tapestry needle
2 wooden skewers
Silver paint marker
Glue
Chenille stem
Small ring

ARMS (MAKE 2):
Rd 1: With gray, 6 sc in magic ring. (6)
Rd 2: (sc in next 2 sc, 2 sc in next sc) around. (8)
Rds 3-8: sc in each sc around. (8)
Rd 9: (sc in next 3 sc, 2 sc in next sc) around. (10)
BEGIN STUFFING THE ARMS FIRMLY. CONTINUE STUFFING AS YOU GO.
Rds 10-16: sc in each sc around. (10)
Finish off.

GLOVES (MAKE 2):
Rd 1: With coffee, 6 sc in magic ring. (6)
Rd 2: (sc in next 2 sc, 2 sc in next sc) around. (8)
Rds 3-4: sc in each sc around. (8)
Rd 5: 3 sc in next 2 sc, sc in next 6 sc. (12)
Rd 6: sc in each sc around. (12)
Rd 7: (sc3tog) twice, sc in next 6 sc. (8)
Rd 8: (sc in next 2 sc, sc2tog) around. (6)
Rd 9: (sc in next 2 sc, 2 sc in next sc) around. (8)
Rd 10: (sc in next sc, 2 sc in next sc) around. (12)
Rds 11-16: sc in each sc around. (12)
Finish off leaving a long tail.

ARM WRAPS (MAKE 2):
Rw 1: Skip next 3 sc on GLOVES, working in back loops only, attach café latte, ch 1, sc2tog, sc in next 6 sc, sc2tog. (8)
Rw 2: Ch 1, turn; sc2tog, sc in next 4 sc, sc2tog. (6)
Rw 3: Ch 1, turn; sc2tog, sc in next 2 sc, sc2tog. (4)
Finish off. Place GLOVES on ARMS and sew in place stuffing before closing. Weave in ends.

LEGS (MAKE 2):
Rd 1: With charcoal, 8 sc in a magic ring. (8)
Rds 2-4: sc in each sc around. (8)
NOW WORKING IN ROWS.
Rw 5: sc in next 4 sc leaving remaining sc of Rd 4 unworked. (4)
Rw 6: Ch 1, turn; sc in next 4 sc. (4)
Rw 7: Ch 1, turn; sc2tog twice. (2)
NOW WORKING IN RDS AGAIN.
Rd 8: Ch 1, sc in the side of Rows 5-7, slip st in unworked sc on Rd 4, sc in the side of Rows 5-7, sc in top of sc of Row 7. (12)
Rd 9: (sc in next 4 sc, sc2tog) around. (10)
Rd 10: sc2tog, sc in next 6 sc, sc2tog. (8)
BEGIN STUFFING THE LEGS FIRMLY. CONTINUE STUFFING AS YOU GO.
Rds 11-13: sc in each sc around. (8)
Rd 14: sc in next sc, 2 sc in next sc, sc in next 6 sc. (9)
Rd 15: sc in each sc around. (9)
Rd 16: sc in next 2 sc, 2 sc in next sc, sc in next 6 sc. (10)
Rds 17-20: sc in each sc around. (10)
Rd 21: sc in next 4 sc, sc2tog, sc in next 4 sc. (9)
Rds 22-23: sc in each sc around. (9)
Rd 24: 2 sc in next sc, sc in next 8 sc. (10)
Rd 25: sc in each sc around. (10)
Rd 26: sc in next 5 sc, 2 sc in next sc, sc in next 5 sc. (11)
Rd 27: sc in each sc around. (11)
Rd 28: sc in next sc, 2 sc in next sc, sc in next 9 sc. (12)
Rds 29-31: sc in each sc around. (12)
Finish off. Weave in ends.

BOOTS (MAKE 2):
Rd 1: With coffee, ch 6, 2 sc in second ch from hook, sc in next 3 ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 4 ch. (12)
Rd 2: (3 sc in next sc, sc in next 5 sc) around. (16)
Rd 3: Working in back loops only, sc in each sc around. (16)
Rds 4-5: sc in each sc around. (16)
Rd 6: slip st in next 3 sc, ch 1, sc in same sc as last slip st, sc in next 3 sc, (sc2tog) 4 time, sc in next 4 sc. (12)
NOW WORKING IN ROWS.
Rws 7-10: Ch 1, turn; sc in each sc across. (12)
Rw 11: Ch 1, turn; 2 sc in next sc, sc in next 10 sc, 2 sc in next sc. (14)
Rws 12-13: Ch 1, turn; sc in each sc across. (14)
Rw 14: Ch 1, turn; 2 sc in next sc, sc in next 12 sc, 2 sc in next sc. (16)
Rws 15-18: Ch 1, turn; sc in each sc across. (16)
Finish off leaving a long tail. Place BOOTS on LEGS and sew back seam closed. Weave in ends.

CHEST JACKET:
Rw 1: With charcoal, ch 16, sc in second ch from hook and in each ch across. (15)
Rws 2-5: Ch 1, turn; sc in each sc across. (15)
Rw 6: Ch 1, turn; sc2tog, sc in next 11 sc, sc2tog. (13)
Rw 7: Ch 1, turn; sc2tog, sc in next 9 sc, sc2tog. (11)
Rws 8-13: Ch 1, turn, sc in each sc across. (11)
LEFT SHOULDER:
Rw 14: Ch 1, turn; sc in next 3 sc, sc2tog, leaving remaining sc unworked. (4)
Rw 15: Ch 1, turn; sc2tog, sc in next 2 sc. (3)
Rws 16-17: Ch 1, turn; sc in each sc across. (3)
Finish off. Weave in ends.
RIGHT SHOULDER AND BACK:
Rw 14: With wrong side facing, attach charcoal in first sc, ch 1, sc in same sc as attachment, sc in next 2 sc, sc2tog, leaving remaining sc unworked. (4)
Rw 15: Ch 1, turn; sc2tog, sc in next 2 sc. (3)
Rws 16-17: Ch 1, turn; sc in each sc across. (3)
Rw 18: Ch 1, turn; sc in next 2 sc,2 sc in next sc, ch 3, working in sc of LEFT SHOULDER, 2 sc in next sc, sc in next 2 sc.
Rw 19: Ch 1, turn; sc in next 4 sc, sc in next 3 ch, sc in next 4 sc. (11)
Rws 20-25: Ch 1, turn; sc in each sc across. (11)
Rw 26: Ch 1, turn; 2 sc in next sc, sc in next 9 sc, 2 sc in next sc. (13)
Rw 27: Ch 1, turn; 2 sc in next sc, sc in next 11 sc, 2 sc in next sc. (15)
Rws 28-32: Ch 1, turn; sc in each sc across. (15)
Finish off leaving a long tail.

CHEST JACKET BELTS (MAKE 2):
Rw 1: With coffee, ch 6, sc in second ch from hook and in each ch across. (5)
Finish off leaving a long tail. Using gray, embroider buckle on each CHEST JACKET BELT. Sew CHEST JACKET BELTS to CHEST JACKET. Weave in ends.

BODY:
Rd 1: With charcoal, ch 2, 4 sc in second ch from hook. (4)
Rd 2: sc in next 2 sc, sc in next 12 sc on RIGHT LEG starting with sc #9, sc in next 2 sc on BODY, sc in next 12 sc on LEFT LEG starting with sc #2. (28)
Rds 3-10: sc in each sc around. (28)
Rd 11: sc in each sc around, slip st in first sc changing to café latte.
BEGIN STUFFING BODY FIRMLY. CONTINUE STUFFING FIRMLY AS YOU GO ALONG.
Rd 12: Ch 1, turn; working in front loops only, sc in next 7 sc, change to grey heather, sc in next 8 sc, change to café latte, sc in next 13 sc, slip st in first sc. (28)
Rd 13: Ch 1, turn; sc in next 13 sc, change to grey heather, sc in next 8 sc, change to café latte, sc in next 7 sc, slip st in first sc. (28)
Rd 14: Ch 1, turn; sc in next 7 sc, change to grey heather, sc in next 8 sc, change to café latte, sc in next 13 sc, slip st in first sc. (28)
Finish off. Weave in ends. Fold Rds 12-14 down.
Rd 15: Working in both loops of Rd 11 and working through sc of Rd 12, skip next 3 sc, attach café latte in next sc, ch 1, sc in same sc as attachment, sc in next 4 sc, sc2tog, sc in next 3 sc, change to grey heather, sc in next 8 sc, change to café latte, sc in next 3 sc, sc2tog, sc in next 5 sc, slip st in first sc. (26)
Rd 16: Ch 1, turn; sc in next 9 sc, change to grey heather, sc in next 3 sc, sc2tog, sc in next 3 sc, change to café latte, sc in next 9 sc, slip st in first sc. (25)
Rds 17-21: Ch 1, turn; sc in next 9 sc, change to grey heather, sc in next 7 sc, change to café latte, sc in next 9 sc, slip st in first sc. (25)
Rd 22: Ch 1, turn; sc in next 4 sc, 2 sc in next sc, sc in next 4 sc, change to grey heather, sc in next 3 sc, 2 sc in next sc, sc in next 3 sc, change to café latte, sc in next 4 sc, 2 sc in next sc, sc in next 4 sc, slip st in first sc. (28)
Rd 23: Ch 1, turn; sc in next 7 sc, 2 sc in next sc, sc in next 2 sc, change to grey heather, sc in next 8 sc, change to café latte, sc in next 2 sc, 2 sc in next sc, sc in next 7 sc, slip st in first sc changing to gray. (30)
Rd 24: Ch 1, turn; sc in each sc around, slip st in first sc. (30)
Rd 25: Ch 1, turn; sc in next 7 sc, holding next sc on BODY and first sc on RIGHT ARM together and working through both thicknesses, sc in next 2 sc, sc in next 12 on BODY, holding next sc on BODY and sc #2 on LEFT ARM together and working through both thicknesses, sc in next 2 sc, sc in next 7 sc.
Rd 26: sc in next 7 sc, sc in next 8 sc on ARM, sc in next 12 sc on BODY, sc in next 8 sc on ARM, sc in next 7 sc on BODY. (42)
Rd 27: sc in each sc around. (42)
Rd 28: sc in next 7 sc, (sc2tog) 4 times, sc in next 12 sc, (sc2tog) 4 times, sc in next 7 sc. (34)
Rd 29: sc in next 6 sc, (sc2tog) 4 times, sc in next 7 sc, (sc2tog) 4 times, sc in next 5 sc. (26)
Rd 30: sc in next 2 sc, (sc2tog) 5 times, sc in next 3 sc, (sc2tog) 5 times, sc in next sc. (16) Change to buff.
Rd 31: (sc in next 2 sc, sc2tog) around. (12)
Rd 32: (sc in next sc, sc2tog) around. (8)
Rd 33: sc in each sc around. (8)
Rd 34: slip st in next 2 sc, ch 1, sc in same sc as last slip st, sc in next sc, 2 sc in next 4 sc, sc in next 2 sc, slip st in first sc changing to white. (12)
Rd 35: Ch 1, turn; sc in next 4 sc, 2 sc in next 4 sc, sc in next 4 sc, slip st in first sc. (16)
Rd 36: Ch 1, turn; (sc in next 3 sc, 2 sc in next sc) around, slip st in first sc. (20)
THIS WOULD BE A GOOD TIME TO PLACE THE CHEST JACKET ON GERALT OF RIVIA. IT WILL BE VERY DIFFICULT TO SLIP THE HEAD THROUGH THE NECK OPENING ON THE CHEST JACKET ONCE THE HEAD IS STUFFED AND CLOSED.
Rd 37: Ch 1, turn; sc in next 7 sc, change to buff, sc in next 2 sc, change to white, sc in next 2 sc, change to buff, sc in next 2 sc, change to white, sc in next 7 sc, slip st in first sc. (20)
Rd 38: Ch 1, turn; sc in next 6 sc, change to buff, sc in next sc, change to white, sc in next sc, change to buff, sc in next 4 sc, change to white, sc in next sc, change to buff, sc in next sc, change to white, sc in next 6 sc, slip st in first sc. (20)
Rd 39: Ch 1, turn; sc in next 5 sc, change to buff, sc in next 3 sc, change to white, sc in next 4 sc, change to buff, sc in next 3 sc, change to white, sc in next 5 sc, slip st in first sc. (20)
Rds 40-44: Ch 1, turn; sc in next 5 sc, change to buff, sc in next 10 sc, change to white, sc in next 5 sc, slip st in first sc. (20)
Rd 45: (sc in next 2 sc, sc2tog) around. (15)
Rd 46: (sc in next sc, sc2tog) around. (10)
Rd 47: sc2tog around. (5)
Finish off with a long tail. Weave tail through sc of Rd 47, pull tightly, and secure. Weave in ends. Sew underarm seams on CHEST JACKET together. Weave in ends.

HAIR:
Fringe on pieces of white hair and trim to shoulder length.

EARS (MAKE 2):
Rw 1: Ch 3, sc in second ch from hook and in next ch. (2)
Finish off leaving a long tail. Sew EARS to HEAD.  Weave in ends.

NOSE:
Rw 1: Ch 3, sc in second ch from hook and in next ch. (2)
Rw 2: Ch 1, turn; sc2tog. (1)
Finish off leaving a long tail. Sew NOSE to HEAD bunching Row 1 together.  Weave in ends.

EYES, EYEBROWS, SCAR, AND MOUTH:
Embroider EYES, EYEBROWS, SCAR, and MOUTH on face of GERALT OF RIVIA.

UPPER ARM GUARDS PIECE 1 (MAKE 2):
Rw 1: With grey heather, ch 5, sc in second ch from hook and in each ch across. (4)
Rws 2-4: Ch 1, turn; sc in each sc across. (4) Change to coffee after Rw 4.
Rw 5: Ch 1, working in the side of Rws, sc in next 3 Rws, 3 sc in next corner, sc in next 2 ch, 3 sc in next corner, working in the side of Rws, sc in next 3 Rws.
Finish off. Weave in ends.

UPPER ARM GUARDS PIECE 2 (MAKE 2):
Rw 1: With grey heather, ch 7, sc in second ch from hook and in each ch across. (6)
Rws 2-6: Ch 1, turn; sc in each sc across. (6) Change to coffee after Rw 6.
Rd 7: Ch 1, working in the side of Rws, sc in next 5 Rws, 2 sc in next Rw, holding next ch of foundation ch on UPPER ARM GUARDS PIECE 2 and the side of Rw 5 together and working through both thicknesses, sc in next 6 ch, working in the side of Rws, 2 sc in next Rw, sc in next 4 Rws, 3 sc in next corner, sc in next 4 sc, 2 sc in next sc, slip st in first sc.
Finish off. Attach UPPER ARM GUARDS to ARMS creating a strap attached to each piece of UPPER ARM GUARDS. Weave in ends.

SHOULDER GUARDS (MAKE 2):
Rw 1: With grey heather, ch 13, sc in second ch from hook and in each ch across. (12)
Rws 2-8: Ch 1, turn; sc in each sc across. (12) Change to coffee after Rw 8.
Rd 9: Ch 1, sc evenly around outside edge with 3 sc in each corner, slip st in first sc.
Finish off. Weave in ends.

SHOULDER GUARD STRAPS (MAKE 2):
Rw 1: With coffee, ch 33, sc in second ch from hook and in each ch across. (32)
Rw 2: Ch 1, turn; sc in each sc across. (32)
Finish off leaving a long tail. Sew SHOULDER GUARD STRAPS to SHOULDER GUARDS wrapping around BODY. Weave in ends.

BELT:
Rw 1: With coffee, ch 33, sc in second ch from hook and in each ch across. (32)
Rw 2: Ch 1, turn; sc in each sc across. (32)
Finish off leaving a long tail. Using gray, embroider buckle on BELT. Wrap around waist and sew together. Tack stitch to secure. Weave in ends.

SWORD SCABBARDS (MAKE 2):
Rw 1: With coffee, ch 21, sc in second ch from hook and in each ch across. (20)
Rws 2-5: Ch 1, turn; sc in each sc across. (20)
Finish off leaving a long tail. Sew Rw 1 and Rw 5 together. Sew closed end. Weave in ends.

SWORD SCABBARDS CONNECTOR:
Rw 1: With coffee, ch 11, sc in second ch from hook and in each ch across. (10)
Finish off leaving a long tail. Sew SWORD SCABBARDS CONNECTOR to SWORD SCABBARDS. Weave in ends.

SWORD BLADES (MAKE 2):
Cut wooden skewer 6 inches from tip. Paint skewer silver with paint marker.

SWORD 1 HANDLE:
Rw 1: With café latte, ch 8, sc in second ch from hook and in each ch across. (7)
Rws 2-3: Ch 1, turn; sc in each sc across. (7)
Rw 4: Ch 1, turn; sc in each sc across, ch 10, slip st in first sc of Rw 4.
Finish off leaving a long tail. Wrap around SWORD BLADE, glue in place, and sew SWORD HANDLE closed.

SWORD 1 HANDLE CAP:
Rw 1: Working in the side of Rws, attach grey heather, ch 1, 2 sc in next 4 Rws. (8)
Finish off leaving a long tail. Sew SWORD HANDLE CAP together. Weave tail through sc of Rw 1, pull tightly and secure. Weave in ends.

SWORD 1 HILT:
Rw 1: Working in the side of Rws of SWORD HANDLE, attach grey heather, ch 1, 2 sc in the side of each Rw, slip st in first sc. (8)
Rw 2: Ch 1, sc in next 2 sc, ch 4, working over chenille stem, sc in second ch from hook, sc in next 2 ch, sc in next 4 sc, ch 4, sc in second ch from hook, sc in next 2 ch, sc in next 2 sc, slip st in first sc.
Finish off. Weave in ends.

SWORD 2 HANDLE:
Rw 1: With grey heather, ch 8, sc in second ch from hook and in each ch across. (7)
Rws 2-3: Ch 1, turn; sc in each sc across. (7)
Rw 4: Ch 1, turn; sc in each sc across, ch 10, slip st in first sc of Rw 4.
Finish off leaving a long tail. Wrap around SWORD BLADE, glue in place, and sew SWORD HANDLE closed.

SWORD 2 HANDLE CAP:
Rw 1: Working in the side of Rws, attach grey heather, ch 1, sc in next 4 Rws. (4)
Finish off leaving a long tail. Sew SWORD HANDLE CAP together. Weave in ends.

SWORD 2 HANDLE CAP MEDALLION:
Rd 1: With grey heather, ch 2, 4 sc in second ch from hook working around ch, slip st in first sc. (4)
Finish off leaving a long tail. Sew SWORD 2 HANDLE CAP MEDALLION to SWORD 2 HANDLE CAP. Weave in ends.

SWORD 2 HILT:
Rw 1: Working in the side of Rws of SWORD HANDLE, attach grey heather, ch 1, 2 sc in the side of each Rw, slip st in first sc. (8)
Rw 2: Ch 1, sc in next 2 sc, ch 5, working over chenille stem, sc in second ch from hook, sc in next 3 ch, sc in next 4 sc, ch 5, sc in second ch from hook, sc in next 3 ch, sc in next 2 sc, slip st in first sc.
Finish off. Weave in ends.

SWORD SCABBARD BELT RING:
With gray, ch 6, slip st in first ch. Finish off. Weave in ends.

SWORD SCABBARD OVERSHOULDER BELT:
Rw 1: With coffee, ch 17, sc in second ch from hook and in each ch across. (16)
Finish off leaving a long tail. Sew one end of SWORD SCABBARD OVERSHOULDER BELT to SWORD SCABBARD BELT RING and the other end to SWORD SCABBARD CONNECTOR. Weave in ends.

SWORD SCABBARD UNDER RIGHT ARM BELT:
Rw 1: With coffee, ch 15, sc in second ch from hook and in each ch across. (14)
Finish off leaving a long tail. Sew one end of SWORD SCABBARD UNDER RIGHT ARM BELT to SWORD SCABBARD BELT RING and the other end to SWORD SCABBARD CONNECTOR. Weave in ends.

SWORD SCABBARD UNDER LEFT ARM BELT:
Rw 1: With coffee, ch 17, sc in second ch from hook and in each ch across. (16)
Finish off leaving a long tail. Sew one end of SWORD SCABBARD UNDER LEFT ARM BELT to SWORD SCABBARD BELT RING and the other end to SWORD SCABBARD CONNECTOR. Weave in ends.

WOLF NECKLACE MEDALLION:
Rd 1: With charcoal, ch 2, 6 sc in second ch from hook working around ch, slip st in first sc. (6)
Rd 2: (Ch 2, slip st in second ch from hook, slip st in next sc) around.
Finish off. Weave in ends. Using red, embroider eyes on WOLF MECKLACE MEDALLION. Use a piece of charcoal as the necklace.

Geralt of Rivia and The Witcher are copyright Netflix and their respective creators.

This crochet pattern is an original pattern and is © by Christjan Bee (August 2020). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use, but you may not sell or distribute it, or sell items made from this pattern.

NOIVERN

Noivern is another request from a customer on Etsy that was not on my “To DO” list. This pattern includes the color list for both Noivern and Shiny Noivern.

MATERIALS:
Worsted Weight Yarn (Shiny colors in parenthesis): Black (mint), lavender (black), teal (burgundy), white, yellow, and red (blue).
E crochet hook
Polyester fiberfill
Yarn Needle
4 black chenille stems
Floral wire

CHEST FUR:
Rw 1: With white, ch 2, 2 sc in second ch from hook. (2)
Rw 2: Ch 1, turn; 2 sc in each sc across. (4)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next 2 sc, 2 sc in next sc. (6)
Rw 4: Ch 1, turn; 2 sc in next sc, sc in next 4 sc, 2 sc in next sc. (8)
Rw 5: Ch 1, turn; 2 sc in next sc, sc in next 6 sc, 2 sc in next sc. (10)
Finish off. Weave in ends.

SHOULDER FUR (MAKE 2):
Rw 1: With white, ch 4, sc in second ch from hook, hdc in next ch, dc in next ch. (3)
Rw 2: Ch 4, sc in second ch from hook, hdc in next ch, dc in next ch. (3)
Finish off. Weave in ends.

BODY:
Rd 1: With black, 5 sc in magic ring, slip st in first sc. (5)
Rd 2: 2 sc in next 2 sc, change to lavender, 2 sc in next sc, change to black, 2 sc in next 2 sc, slip st in first sc. (10)
Rd 3: Ch 1, turn; sc in next 4 sc, change to lavender, 2 sc in next 2 sc, change to black, sc in next 4 sc, slip st in first sc. (12)
Rd 4: Ch 1, turn; 2 sc in next sc, sc in next 3 sc, change to lavender, 2 sc in next sc, sc in next 2 sc, 2 sc in next sc, change to black, sc in next 4 sc, slip st in first sc. (15)
Rd 5: Ch 1, turn; 2 sc in next sc, sc in next 3 sc, change to lavender, 2 sc in next sc, sc in next 4 sc, 2 sc in next sc, change to black, sc in next 5 sc, slip st in first sc. (18)
Rd 6: Ch 1, turn; 2 sc in next sc, sc in next 4 sc, change to lavender, 2 sc in next sc, sc in next 6 sc, 2 sc in next sc, change to black, sc in next 5 sc, slip st in first sc. (21)
Rd 7: Ch 1, turn; 2 sc in next sc, sc in next 3 sc, 2 sc in next sc, change to lavender, sc in next 10 sc, change to black, 2 sc in next sc, sc in next 5 sc, slip st in first sc. (24)
Rd 8: Ch 1, sc in next 6 sc, 2 sc in next sc, change to lavender, sc in next 10 sc, change to black, 2 sc in next sc, sc in next 6 sc, slip st in first sc. (26)
Rd 9: Ch 1, turn; sc in next 7 sc, 2 sc in next sc, change to lavender, sc in next 10 sc, change to black, 2 sc in next sc, sc in next 7 sc, slip st in first sc. (28)
Rds 10-11: Ch 1, turn; sc in next 9 sc, change to lavender, sc in next 10 sc, change to black, sc in next 9 sc, slip st in first sc. (28)
Rd 12: Ch 1, turn; sc in next 7 sc, sc2tog, change to lavender, sc in next 10 sc, change to black, sc2tog, sc in next 7 sc, slip st in first sc. (26)
Rd 13: Ch 1, turn; sc in next 8 sc, change to lavender, sc2tog, sc in next 6 sc, sc2tog, change to black, sc in next 8 sc, slip st in first sc. (24)
Rds 14-19: Ch 1, turn; sc in next 8 sc, change to lavender, sc in next 8 sc, change to black, sc in next 8 sc, slip st in first sc. (24)
Rd 20: Ch 1, turn; sc in next 8 sc, change to lavender, sc in next 4 sc, 2 sc in next sc, sc in next 3 sc, change to black, sc in next 8 sc, slip st in first sc. (25)
Rd 21: Ch 1, turn; sc in next 8 sc, change to lavender, 2 sc in next sc, (sc in next 3 sc, 2 sc in next sc) twice change to black, sc in next 8 sc, slip st in first sc. (28)
Rds 22-23: Ch 1, turn; sc in next 8 sc, change to lavender, sc in next 12 sc, change to black, sc in next 8 sc, slip st in first sc. (28)
Rd 24: Ch 1, turn; sc in next 7 sc, 2 sc in next sc, change to lavender, sc2tog, sc in next 8 sc, sc2tog, change to black, 2 sc in next sc, sc in next 7 sc, slip st in first sc. (28)
Rd 25: Ch 1, turn; sc in next 9 sc, change to lavender, sc in next 10 sc, change to black, sc in next 9 sc, slip st in first sc. (28)
Rd 26: Ch 1, turn; sc in next 9 sc, change to lavender, sc in next 10 sc, change to black, sc in next 9 sc, slip st in first sc changing to white. (28)
Rd 27: Ch 1, turn; sc in next 2 sc, holding next sc on BODY and side of Rw 1 of SHOULDER FUR together and working through both thicknesses, sc in next 5 sc, sc in next 2 sc on BODY, holding next sc on BODY and first sc on CHEST FUR together and working through both thicknesses, sc in next 10 sc, sc in next 2 sc on BODY, holding next sc on BODY and side of Rw 1 of SHOULDER FUR together and working through both thicknesses, sc in next 5 sc, sc in next 2 sc on BODY, slip st in first sc. (28)
BEGIN STUFFING BODY FIRMLY. CONTINUE STUFFING BODY FIRMLY AS YOU GO ALONG.
Rd 28: Ch 1, turn; sc in next 4 sc, (sc2tog) 3 times, sc in next 8 sc, (sc2tog) 3 times, sc in next 4 sc, slip st in first sc. (22)
Rd 29: sc in next 4 sc, (sc2tog) twice, sc in next 7 sc, (sc2tog) twice, sc in next 3 sc. (18)
Rds 30-31: sc in each sc around. (18)
Rd 32: sc in next 8 sc, sc2tog, sc in next 8 sc. (17)
Rds 33-34: sc in each sc around. (17)
Rd 35: sc2tog, sc in next 15 sc. (16)
Rds 36-38: sc in each sc around. (16)
Finish off leaving a long tail. Sew CHEST FUR to BODY. Weave in ends.

TAIL:
Rd 1; With black, ch 2, 4 sc in second ch from hook working around ch. (4)
Rd 2: 2 sc in next sc, sc in next 3 sc. (5)
Rd 3: (sc in next sc, 2 sc in next sc) twice, sc in next sc. (7)
Rds 4-5: sc in each sc around. (7)
Rd 6: sc in each sc around, slip st in first sc. (7)
Rd 7: Ch 1, sc in next 6 sc, change to teal, sc in next sc. (7)
Rd 8: Ch 1, turn; sc in next sc, change to black, sc in next 5 sc, 2 sc in next sc, slip st in first sc. (8)
Rd 9: Ch 1, turn; sc in next 7 sc, change to teal, sc in next sc, slip st in first sc. (8)
Rd 10: Ch 1, turn; sc in next sc, change to black, sc in next 7 sc, slip st in first sc. (8)
Rd 11: Ch 1, turn; sc in next 7 sc, change to teal, 2 sc in next sc, slip st in first sc. (9)
Rd 12: Ch 1, turn; sc in next 2 sc, change to black, sc in next 7 sc, slip st in first sc. (9)
Rd 13: Ch 1, turn; sc in next 7 sc, change to teal, sc in next 2 sc, slip st in first sc. (9)
Rd 14: Ch 1, turn; sc in next 2 sc, change to black, 2 sc in next sc, sc in next 6 sc, slip st in first sc. (10)
Rd 15: Ch 1, turn; sc in next 8 sc, change to teal, sc in next 2 sc, slip st in first sc. (10)
Rd 16: Ch 1, turn; sc in next 2 sc, change to black, sc in next 8 sc, slip st in first sc. (10)
Rd 17: Ch 1, turn; sc in next 8 sc, change to teal, sc in next 2 sc, slip st in first sc. (10)
Rd 18: Ch 1, turn; sc in next 2 sc, change to black, sc in next 8 sc, slip st in first sc. (10)
Rd 19: Ch 1, turn; sc in next 8 sc, change to teal, sc in next 2 sc, slip st in first sc. (10)
Rd 20: Ch 1, turn; sc in next 2 sc, change to black, sc in next 8 sc, slip st in first sc. (10)
Rd 21: Ch 1, turn; sc in next 8 sc, change to teal, sc in next 2 sc, slip st in first sc. (10)
Rd 22: Ch 1, turn; sc in next 2 sc, change to black, sc in next 8 sc, slip st in first sc. (10)
Rd 23: Ch 1, turn; sc in next 8 sc, change to teal, 2 sc in next sc, sc in next sc, slip st in first sc. (11)
Rd 24: Ch 1, turn; sc in next 3 sc, change to black, sc in next 8 sc, slip st in first sc. (11)
Rd 25: Ch 1, turn; sc in next 8 sc, change to teal, sc in next 3 sc, slip st in first sc. (11)
Rd 26: Ch 1, turn; sc in next 3 sc, change to black, sc in next 8 sc, slip st in first sc. (11)
Rd 27: Ch 1, turn; sc in next 8 sc, change to teal, sc in next 3 sc, slip st in first sc. (11)
Rd 28: Ch 1, turn; sc in next 3 sc, change to black, 2 sc in next sc, sc in next 7 sc, slip st in first sc. (12)
Rd 29: Ch 1, turn; sc in next 9 sc, change to teal, sc in next 3 sc, slip st in first sc. (12)
Rd 30: Ch 1, turn; sc in next 3 sc, change to black, sc in next 9 sc, slip st in first sc. (12)
Rd 31: Ch 1, turn; sc in next 9 sc, change to teal, sc in next 3 sc, slip st in first sc. (12)
Rd 32: Ch 1, turn; sc in next 3 sc, change to black, sc in next 9 sc, slip st in first sc. (12)
Rd 33: Ch 1, turn; sc in next 9 sc, change to teal, sc in next sc, 2 sc in next sc, sc in next sc, slip st in first sc. (13)
Rd 34: Ch 1, turn; sc in next 4 sc, change to black, sc in next 4 sc, 2 sc in next sc, sc in next 4 sc, slip st in first sc. (14)
Rd 35: Ch 1, turn; sc in next 5 sc, 2 sc in next sc, sc in next 4 sc, change to teal, sc in next sc, 2 sc in next sc, sc in next 2 sc, slip st in first sc. (16)
Rd 36: Ch 1, turn; sc in next 2 sc, 2 sc in next sc, sc in next 2 sc, change to black, sc in next 11 sc, slip st in first sc. (17)
Rd 37: Ch 1, turn; sc in next 11 sc, change to teal, sc in next 6 sc, slip st in first sc. (17)
Finish off leaving a long tail. Stuff TAIL firmly. Sew TAIL to BODY. Weave in ends.

TAIL SPIKES:
Rw 1: With black, ch 10, dc in third ch from hook, hdc in next ch, sc in next ch, slip st in next ch, ch 2, dc in next ch, hdc in next ch, sc in next ch, slip st in next ch. (8)
Finish off leaving a long tail. Sew TAIL SPIKES to TAIL. Weave in ends.

TOES (MAKE 4):
Rd 1; With black, ch 2, 4 sc in second ch from hook working around ch. (4)
Rd 2: (sc in next sc, 2 sc in next sc) around. (6)
Rd 3: sc in each sc around. (6)
Finish off. Weave in ends.

LEG SPIKES (MAKE 2):
Rd 1: With black, ch 2, 4 sc in second ch from hook working around ch. (4)
Rd 2: sc in each sc around. (4)
Finish off. Weave in ends.

LEGS (MAKE 2):
Rd 1: With black, 8 sc in magic ring. (8)
Rd 2: 2 sc in each sc around. (16)
Rd 3: sc in next 5 sc, (holding next sc on LEGS and first sc on TOES together and working through both thicknesses, sc in next 3 sc) twice, sc in next 5 sc on LEGS.
Rd 4: sc in next 5 sc, (sc in next 3 sc on TOES) twice, sc in next 5 sc on LEGS. (16)
Rd 5: sc in next 5 sc, (sc2tog) 3 times, sc in next 5 sc. (13)
Rd 6: sc in next 4 sc, (sc2tog) 3 times, sc in next 3 sc. (10)
Rds 7-11: sc in each sc around. (10)
Rd 12: sc in next sc, holding next sc on LEGS and first sc on LEG SPIKE together and working through both thicknesses, sc in next 2 sc, sc in next 7 sc on LEGS.
Rd 13: sc in next sc, sc in next 2 sc on LEG SPIKE, sc in next 7 sc on LEGS. (10)
Rd 14: sc in next 7 sc, 2 sc in next 2 sc, sc in next sc. (12)
Rd 15: sc in next 8 sc, 2 sc in next 2 sc, sc in next 2 sc. (14)
Rd 16: sc in next 8 sc, 2 sc in next 2 sc, sc in next 4 sc. (16)
Rds 17-18: sc in next 2 sc, 2 sc in next 2 sc, sc in next 5 sc, (sc2tog) twice, sc in next 3 sc. (16)
Rds 19-20: sc in next 4 sc, 2 sc in next 2 sc, sc in next 5 sc, (sc2tog) twice, sc in next sc. (16)
Rds 21-22: sc in next 6 sc, 2 sc in next 2 sc, sc in next 4 sc, (sc2tog) twice. (16)
Rds 23-34: sc2tog, sc in next 5 sc, 2 sc in next 2 sc, sc in next 5 sc, sc2tog. (16)
Rd 25: (sc in next 2 sc, sc2tog) around. (12)
STUFF LEGS FIRMLY.
Rd 26: sc2tog around. (6)
Finish off leaving a long tail. Weave tail through sc of Rd 26, pull tightly and secure. With red, embroider 2 bumps on each LEG. Sew LEGS to BODY. Weave in ends.

WING INSIDE (MAKE 2):
Rw 1: With teal, ch 17, sc in second ch from hook and in each ch across. (16)
Rw 2: Ch 1, turn; sc in each sc across. (16)
Rw 3: Ch 1, turn; sc in next 14 sc, sc2tog. (15)
Rw 4: Ch 1, turn; sc in each sc across. (15)
Rw 5: Ch 1, turn; sc in next 13 sc, sc2tog. (14)
Rw 6: Ch 1, turn; sc in each sc across. (14)
Rw 7: Ch 1, turn; sc in next 12 sc, sc2tog. (13)
Rw 8: Ch 1, turn; sc in next 12 sc, 2 sc in next sc. (14)
Rw 9: Ch 2, 2 sc in second ch from hook, sc in next 12 sc, sc2tog. (15)
Rw 10: Ch 1, turn; sc in next 14 sc, 2 sc in next sc. (16)
Rw 11: Ch 2, 2 sc in second ch from hook, sc in next 14 sc, sc2tog. (17)
Rw 12: Ch 1, turn; sc in next 16 sc, 2 sc in next sc. (18)
Rw 13: Ch 2, 2 sc in second ch from hook, sc in next 18 sc. (20)
Rw 14: Ch 1, turn; sc in next 19 sc, 2 sc in next sc. (21)
Rw 15: Ch 2, sc in second ch from hook, sc in next 21 sc. (23)
Rw 16: Ch 1, turn; sc in next 22 sc, 2 sc in next sc. (24)
Rw 17: Ch 2, sc in second ch from hook, sc in next 24 sc. (26)
Rw 18: Ch 1, turn; sc in next 25 sc, 2 sc in next sc. (27)
Rws 19-21: Ch 1, turn; sc in each sc across. (27)
Rw 22: Ch 1, turn; sc in next 25 sc, sc2tog. (26)
Rw 23: Ch 1, turn; sc2tog, sc in next 24 sc. (25)
Rw 24: Ch 1, turn; sc in next 23 sc, sc2tog. (24)
Rw 25: Ch 1, turn; sc2tog, sc in next 21 sc, 2 sc in next sc. (24)
Rw 26: Ch 1, turn; sc in next 22 sc, sc2tog. (23)
Rw 27: Ch 1, turn; sc2tog, sc in next 21 sc. (22)
Rw 28: Ch 1, turn; 2 sc in next sc, sc in next 19 sc, sc2tog. (22)
Rw 29: Ch 1, turn; sc2tog, sc in next 20 sc. (21)
Rw 30: Ch 1, turn; sc in next 19 sc, sc2tog. (20)
Rw 31: Ch 1, turn; sc2tog, sc in next 17 sc, 2 sc in next sc. (20)
Rw 32: Ch 1, turn; sc in next 18 sc, sc2tog. (19)
Rw 33: Ch 1, turn; sc2tog, sc in next 16 sc, 2 sc in next sc. (19)
Rw 34: Ch 1, turn; sc in next 17 sc, sc2tog. (18)
Rw 35: Ch 1, turn; sc2tog, sc in next 15 sc, 2 sc in next sc. (18)
Rw 36: Ch 1, turn; 2 sc in next sc, sc in next 15 sc, sc2tog. (18)
Rw 37: Ch 1, turn; sc2tog, sc in next 15 sc, 2 sc in next sc. (18)
Rw 38: Ch 2, 2 sc in second ch from hook, sc in next 14 sc, sc3tog. (17)
Rw 39: Ch 1, turn; sc3tog, sc in next 14 sc, 2 sc in next sc. (17)
Rw 40: Ch 2, 2 sc in second ch from hook, sc in next 14 sc, sc3tog. (17)
Finish off. Weave in ends.

WING OUTSIDES (MAKE 2):
Rw 1: With black, ch 17, sc in second ch from hook and in each ch across. (16)
Rw 2: Ch 1, turn; sc in each sc across. (16)
Rw 3: Ch 1, turn; sc in next 14 sc, sc2tog. (15)
Rw 4: Ch 1, turn; sc in each sc across. (15)
Rw 5: Ch 1, turn; sc in next 13 sc, sc2tog. (14)
Rw 6: Ch 1, turn; sc in each sc across. (14)
Rw 7: Ch 1, turn; sc in next 12 sc, sc2tog. (13)
Rw 8: Ch 1, turn; sc in next 12 sc, 2 sc in next sc. (14)
Rw 9: Ch 2, 2 sc in second ch from hook, sc in next 12 sc, sc2tog. (15)
Rw 10: Ch 1, turn; sc in next 14 sc, 2 sc in next sc. (16)
Rw 11: Ch 2, 2 sc in second ch from hook, sc in next 14 sc, sc2tog. (17)
Rw 12: Ch 1, turn; sc in next 16 sc, 2 sc in next sc. (18)
Rw 13: Ch 2, 2 sc in second ch from hook, sc in next 18 sc. (20)
Rw 14: Ch 1, turn; sc in next 19 sc, 2 sc in next sc. (21)
Rw 15: Ch 2, sc in second ch from hook, sc in next 21 sc. (23)
Rw 16: Ch 1, turn; sc in next 22 sc, 2 sc in next sc. (24)
Rw 17: Ch 2, sc in second ch from hook, sc in next 24 sc. (26)
Rw 18: Ch 1, turn; sc in next 25 sc, 2 sc in next sc. (27)
Rws 19-20: Ch 1, turn; sc in each sc across. (27) Change to lavender after Rw 20.
Rw 21: Ch 1, turn; sc in next sc, change to black, sc in next 26 sc. (27)
Rw 22: Ch 1, turn; sc in next 23 sc, change to lavender, sc in next 2 sc, sc2tog. (26)
Rw 23: Ch 1, turn; sc2tog, sc in next 4 sc, sc in next 20 sc. (25)
Rw 24: Ch 1, turn; sc in next 17 sc, change to lavender, sc in next 6 sc, sc2tog. (24)
Rw 25: Ch 1, turn; sc2tog, sc in next 8 sc, change to black, sc in next 13 sc, 2 sc in next sc. (24)
Rw 26: Ch 1, turn; sc in next 12 sc, change to lavender, sc in next 10 sc, sc2tog. (23)
Rw 27: Ch 1, turn; sc2tog, sc in next 12 sc, change to black, sc in next 9 sc. (22)
Rw 28: Ch 1, turn; 2 sc in next sc, sc in next 5 sc, change to lavender, sc in next 14 sc, sc2tog. (22)
Rw 29: Ch 1, turn; sc2tog, sc in next 16 sc, change to black, sc in next 4 sc. (21) Change to lavender.
Rw 30: Ch 1, turn; sc in next 19 sc, sc2tog. (20)
Rw 31: Ch 1, turn; sc2tog, sc in next 17 sc, 2 sc in next sc. (20)
Rw 32: Ch 1, turn; sc in next 18 sc, sc2tog. (19)
Rw 33: Ch 1, turn; sc2tog, sc in next 16 sc, 2 sc in next sc. (19)
Rw 34: Ch 1, turn; sc in next 17 sc, sc2tog. (18)
Rw 35: Ch 1, turn; sc2tog, sc in next 15 sc, 2 sc in next sc. (18)
Rw 36: Ch 1, turn; 2 sc in next sc, sc in next 15 sc, sc2tog. (18)
Rw 37: Ch 1, turn; sc2tog, sc in next 15 sc, 2 sc in next sc. (18)
Rw 38: Ch 2, 2 sc in second ch from hook, sc in next 14 sc, sc3tog. (17)
Rw 39: Ch 1, turn; sc3tog, sc in next 14 sc, 2 sc in next sc. (17)
Rw 40: Ch 2, 2 sc in second ch from hook, sc in next 14 sc, sc3tog. (17)
Finish off. Weave in ends. Using black and lavender, sew bottom edge of WING INSIDE and WING OUTSIDE together.

WING RIBBING #1 (COMPLETE ON BOTH WINGS):
Rw 1: Following the black stitches on the graph above and working over sc of WING OUTSIDE, attach black in tenth sc from bottom edge, working toward bottom edge and following graph, sc over the next 10 sc, ch 6, working over chenille stem, sc in second ch from hook, sc in next 4 ch, working over coordinating sts on WING INSIDE, sc in next 29 sc following pattern indicated on graph above.
Finish off. Weave in ends.

WING RIBBING #2 (COMPLETE ON BOTH WINGS):
Rw 1: Following the black stitches on the graph above and working over sc of WING OUTSIDE, attach black, in eighth sc of Rw 18 from bottom edge, working toward bottom edge and following graph, sc over the next 8 sc, ch 6, working over chenille stem, sc in second ch from hook, sc in next 4 ch, working over coordinating sts on WING INSIDE, sc in next 27 sc following pattern indicated on graph above, slip st in last sc of WING RIBBING #1.
Finish off. Weave in ends.

WING ARMS (COMPLETE ON BOTH WINGS):
Rw 1: Holding WING INSIDE and WING OUTSIDE together and working through both thicknesses, working over floral wire, attach black in the side of Rw 1, ch 1, sc in same Rw as attachment, sc in next 7 sc, (sc in next ch, sc in next 2 Rws) 5 times, sc in next 3 Rws, change to lavender, sc in next 20 Rws, working in sc of Rw 40, sc in next 16 sc, 2 sc in next sc.
Rw 2: Ch 1, turn; working over sc of Rw 1, sc over next 38 sc, change to black, sc over next 26 sc.
Finish off leaving a long tail. Sew WINGS to BODY. Weave in ends.

CLAWS (MAKE 2):
Rw 1: With red, ch 5, sc in second ch from hook and in each ch across. (4)
Rws 2-3: Ch 5, sc in second ch from hook and in each ch across. (4)
Finish off leaving a long tail. Sew CLAWS to WINGS. Weave in ends.

BACK FUR:
Fringe on pieces of white yarn starting between SHOULDER FUR and going down 5 Rds down spine. Cut yarn to the length of 3 fingers.

HEAD:
BOTTOM OF HEAD:
Rd 1: With lavender, 8 sc in magic ring. (8)
Rd 2: 2 sc in each sc around. (16)
Rd 3: (sc in next sc, 2 sc in next sc) around. (24)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around. (32)
Rds 5-7: sc in each sc around. (32)
Finish off. Weave in ends.

TOP OF HEAD:
Rd 1: With black, 8 sc in magic ring. (8)
Rd 2: 2 sc in each sc around. (16)
Rd 3: (sc in next sc, 2 sc in next sc) around. (24)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around. (32)
Rds 5-6: sc in each sc around. (32)
Rd 7: slip st in next sc, ch 1, turn; holding TOP OF HEAD and BOTTOM OF HEAD together and working through both thicknesses, sc in each sc around stuffing firmly before closing, slip st in first sc. (32)
Finish off. Sew HEAD to BODY. Weave in ends.

TEETH (MAKE 2):
Rw 1: With black, ch 3, sc in second ch from hook, dc in next ch. (2)
Finish off leaving a long tail. Sew TEETH to HEAD. Weave in ends.

EARS (MAKE 2):
Rd 1: With teal, 6 sc in magic ring, slip st in first sc. (6)
Rd 2: Ch 1, 2 sc in each sc around, slip st in first sc. (12)
Rd 3: Ch 1, (sc in next sc, 2 sc in next sc) around, slip st in first sc. (18)
Rd 4: Ch 1, (sc in next 2 sc, 2 sc in next sc) around, slip st in first sc. (24)
Rd 5: Ch 1, (sc in next 3 sc, 2 sc in next sc) around, slip st in first sc. (30)
Rd 6: Ch 1, (sc in next 4 sc, 2 sc in next sc) around, slip st in first sc changing to black. (36)
Rd 7: Ch 1, sc in each sc around. (36)
Rds 8-12: sc in each sc around. (36)
Rd 13: (sc in next 4 sc, sc2tog) around. (30)
Rd 14: (sc in next 3 sc, sc2tog) around. (24)
Rd 15: (sc in next 2 sc, sc2tog) around. (18)
Rd 16: (sc in next sc, sc2tog) around. (12)
Rd 17: sc2tog around. (6)
Finish off leaving a long tail. Weave tail through sc of Rd 17, pull tightly and secure. Using black, embroider circles around Rds 2 and 4. Sew EARS to HEAD.

EAR POINTS (MAKE 2):
Rd 1: With black, ch 2, 4 sc in second ch from hook working around ch. (4)
Rd 2: sc in each sc around. (4)
Rd 3: (sc in next sc, 2 sc in next sc) around. (6)
Rd 4: sc in each sc around. (6)
Finish off leaving a long tail. Sew EAR POINTS to EARS. Weave in ends.

WHISKERS (MAKE 2):
Rw 1: With black, ch 6, sc in second ch from hook, sc in next 2 ch, hdc in next 2 ch. (5)
Finish off leaving a long tail. Sew WHISKERS to HEAD. Weave in ends.

ANTENNA:
Rw 1: With red, ch 22, sc in second ch from hook, sc in next 3 ch, hdc in next 3 ch, dc2tog, dc3tog, dc2tog, hdc in next 3 ch, sc in next 4 ch.
Finish off leaving a long tail. Sew ANTENNA to HEAD. Weave in ends.

EYES:
Using yellow, black, and teal and using picture above as reference, embroider EYES on HEAD.

Noivern, Shiny Noivern and Pokemon are copyright Nintendo and their respective creators.

This pattern is an original pattern and is © by Christjan Bee (January 2020). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint it on your site. You may keep a copy for your own personal use, but you may not sell or distribute it, or sell items made from this pattern.

SNARL YAMI

 

This is a Pokemon-styled concept that an Etsy customer created and asked if I could create a plush of. Of course, in tradition of our motto at Crochet Fanatic – “You dream it, we create it”, I brought his concept to life in plush. This is the stage 1 evolution of Snarl. I am hoping that there is a Stage 2 Evolution of Snarl.

MATERIALS:
Worsted Weight Yarn: Black, white, pink, red, gold, light blue, gray, lilac, and buff.
E crochet hook
Polyester Fiberfil
Tapestry needle
Red safety nose
21 yellow facet beads
White crochet cotton
Beading needle
Wooden skewer
Floral wire

BODY:
Rd 1: With black, 8 sc in magic ring. (8)
Rd 2: 2 sc in each sc around. (16)
Rd 3: sc in next 4 sc, (2 sc in next sc, sc in next sc) 3 times, 2 sc in next sc, sc in next 5 sc. (20)
Rd 4: (sc in next 3 sc, 2 sc in next sc) 4 times, sc in next 4 sc. (24)
Rd 5: (sc in next 4 sc, 2 sc in next sc) 4 times, sc in next 4 sc. (28)
Rd 6: sc in next 6 sc, (2 sc in next sc, sc in next 4 sc) 3 times, 2 sc in next sc, sc in next 6 sc. (32)
Rd 7: sc in next 6 sc, (2 sc in next sc, sc in next 5 sc) 3 times, 2 sc in next sc, sc in next 7 sc. (36)
Rds 8-11: sc in each sc around. (36)
Rd 12: sc in next 13 sc, (sc2tog, sc in next 4 sc) twice, sc2tog, sc in next 9 sc. (33)
Rds 13-17: sc in each sc around. (33)
Rd 18: sc in next 15 sc, sc2tog, sc in next 3 sc, sc2tog, sc in next 2 sc, sc2tog, sc in next 7 sc. (30)
Rds 19-23: sc in each sc around. (30)
Rd 24: sc in next 14 sc, sc2tog, sc in next 2 sc, sc2tog, sc in next 2 sc, sc2tog, sc in next 6 sc. (27)
Rds 25-29: sc in each sc around. (27)
Rd 30: (sc in next sc, sc2tog) around. (18)
Rd 31: (sc in next sc, sc2tog) around. (12)
STUFF BODY FIRMLY.
Rd 32: sc2tog around. (6)
Finish off leaving a long tail. Weave tail through sc of Rd 32, pull tightly and secure. Weave in ends.

HEAD:
Rd 1: With black, 8 sc in magic ring, slip st in first sc. (8)
Rd 2: Ch 1, turn; 2 sc in each sc around, slip st in first sc. (16)
Rd 3: Ch 1, turn; (sc in next sc, 2 sc in next sc) around, slip st in first sc. (24)
Rd 4: Ch 1, turn; (sc in next 2 sc, 2 sc in next sc) 3 times, change to white, (sc in next 2 sc, 2 sc in next sc) twice, change to black, (sc in next 2 sc, 2 sc in next sc) 3 times, slip st in first sc. (32)
Rd 5: Ch 1, turn; (sc in next 3 sc, 2 sc in next sc) 3 times, change to white, (sc in next 3 sc, 2 sc in next sc) twice, change to black, (sc in next 3 sc, 2 sc in next sc) 3 times, slip st in first sc. (40)
Rd 6: Ch 1, turn; sc in next 14 sc, change to white, sc in next 12 sc, change to black, sc in next 14 sc, slip st in first sc. (40)
Rd 7: Ch 1, turn; sc in next 12 sc, change to white, sc in next 16 sc, change to black, sc in next 12 sc, slip st in first sc. (40)
Rds 8-13: Ch 1, turn; sc in next 10 sc, change to white, sc in next 20 sc, change to black, sc in next 10 sc, slip st in first sc. (40)
Rd 14: Ch 1, turn; (sc in next 3 sc, sc2tog) twice, change to white, (sc in next 3 sc, sc2tog) 4 times, change to black, (sc in next 3 sc, sc2tog) twice, slip st in first sc. (32)
Rd 15: Ch 1, turn; (sc in next 2 sc, sc2tog) twice, change to white, (sc in next 2 sc, sc2tog) 4 times, change to black, (sc in next 2 sc, sc2tog) twice, slip st in first sc. (24)
Rd 16: Ch 1, turn; (sc in next sc, sc2tog) twice, change to white, (sc in next sc, sc2tog) 4 times, change to black, (sc in next sc, sc2tog) twice, slip st in first sc. (16)
Rds 17-19: Ch 1, turn; sc in next 4 sc, change to white, sc in next 8 sc, change to black, sc in next 4 sc, slip st in first sc. (16)
Rd 20: Ch 1, turn; sc in next 2 sc, 2 sc in next sc, sc in next sc, change to white, sc in next sc, 2 sc in next sc, sc in next 4 sc, 2 sc in next sc, sc in next sc, change to black, sc in next sc, 2 sc in next sc, sc in next 2 sc, slip st in first sc. (20)
Finish off leaving a long tail. Stuff HEAD firmly.

BELLY:
Rw 1: Attach white in first white sc of HEAD, ch 1, sc in same sc as attachment, sc in next 9 sc. (10)
Rws 2-18: Ch 1, turn; sc in each sc across. (10)
Rw 19: Ch 1, turn; sc2tog, sc in next 6 sc, sc2tog. (8)
Rws 20-29: Ch 1, turn; sc in each sc across. (8)
Rw 30: Ch 1, turn; sc2tog, sc in next 4 sc, sc2tog. (6)
Rw 31: Ch 1, turn; sc2tog, sc in next 2 sc, sc2tog. (4)
Rw 32: Ch 1, turn; sc2tog, sc2tog. (2)
Finish off leaving a long tail. Sew HEAD and BELLY to BODY. Weave in ends.

MUZZLE:
INSIDE OF MOUTH (MAKE 2):
Rd 1: With pink, ch 4, sc in second ch from hook, sc in next ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 2 ch. (7)
Rd 2: Ch 1, turn; sc in next 2 sc, 2 sc in next 3 sc, sc in next 2 sc. (10)
Finish off leaving a long tail. Sew INSIDE OF MOUTH together. Weave in ends.

LOWER JAW:
Rd 1: With white, ch 4, sc in second ch from hook, sc in next ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 2 ch. (7)
Rd 2: Ch 1, turn; sc in next 2 sc, 2 sc in next 3 sc, sc in next 2 sc. (10)
Rd 3: Ch 1, turn; holding next sc on LOWER JAW and first sc on INSIDE OF MOUTH together and working through both thicknesses, sc in each sc around. (10)
Finish off. Weave in ends.

UPPER MUZZLE:
Rd 1: With black, ch 5, sc in second ch from hook, sc in next 2 ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 3 ch. (9)
Rd 2: Ch 1, turn; sc in next 3 sc, 2 sc in next 3 sc, sc in next 3 sc. (12) Change to white.
Rd 3: Ch 1, turn; sc in each sc around. (12)
Rd 4: Ch 1, turn; sc in next 3 sc, sc2tog, sc in next 2 sc, sc2tog, sc in next 3 sc. (10)
INSERT RED SAFETY NOSE.
Rd 5: Ch 1, turn; holding next sc on UPPER MUZZLE and first sc on INSIDE OF MOUTH together and working through both thicknesses, sc in next 3 sc, ch 3, slip st in second ch from hook, sc in next 4 sc, ch 3, slip st in second ch from hook, sc in next 3 sc. (10)
Finish off. Weave in ends.

BACK OF MUZZLE:
Rd 1: Attach white in foundation ch of LOWER JAW, ch 1, sc in same ch as attachment, sc in next 3 Rds, working in the side of Rds of UPPER MUZZLE, sc in next Rd, sc2tog, change to black, sc in next 2 Rds, sc in foundation ch of UPPER MUZZLE, sc in next 2 Rds, change to white, sc2tog, sc in next Rd, working in the side of Rds of LOWER JAW, sc in next 3 Rds. (16)
Finish off leaving a long tail. INSERT SAFETY NOSE. Stuff MUZZLE firmly. Sew MUZZLE to BODY. Weave in ends.

SIDEBURNS (MAKE 2):
Rw 1: With white, ch 3, sc in second ch from hook, dc in next ch. (2)
Rws 2-3: Ch 4, sc in second ch from hook, hdc in next ch, dc in next ch. (3)
Rw 4: Ch 5, sc in second ch from hook, hdc in next 2 ch, dc in next ch. (4)
Finish off leaving a long tail. Sew SIDEBURNS to HEAD. Weave in ends.

CHEST FUR:
Rw 1: With white, ch 4, sc in second ch from hook, hdc in next ch, dc in next ch. (3)
Rws 2-7: Ch 4, sc in second ch from hook, hdc in next ch, dc in next ch. (3)
Finish off leaving a long tail. Sew CHEST FUR to BELLY in a U-shape from one side of BELLY to the other.

EARS (MAKE 2):
INNER EARS (MAKE 2):
Rw 1: With white, ch 2, 2 sc in second ch from hook. (2)
Rw 2: Ch 1, turn; sc in each sc across. (2)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next sc. (3)
Rw 4: Ch 1, turn; sc in each sc across. (3)
Rw 5: Ch 1, turn; sc in next 2 sc, 2 sc in next sc. (4)
Rw 6: Ch 1, turn; sc in each sc across. (4)
Finish off. Weave in ends.
OUTER EARS (MAKE 2):
Rw 1: With black, ch 2, 2 sc in second ch from hook. (2)
Rw 2: Ch 1, turn; sc in each sc across. (2)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next sc. (3)
Rw 4: Ch 1, turn; sc in each sc across. (3)
Rw 5: Ch 1, turn; sc in next 2 sc, 2 sc in next sc. (4)
Rw 6: Ch 1, turn; sc in each sc across. (4)
Rw 7: Holding INNER EARS and OUTER EARS together and working through both thicknesses, ch 1, working in the side of Rws, sc in next 6 Rws, 3 sc in free loop of foundation ch, sc in next 6 Rws.
Finish off leaving a long tail. Sew EARS to HEAD. Weave in ends.

EARRINGS (MAKE 3):
With gold, ch 3, finish off. Attach EARRINGS to right EAR.

HAIR:
Fringe on pieces of red along the back of the HEAD starting at the second from bottom SIDEBURN going around behind EARS and to the same SIDEBURN on the other side. Create braid on each side of HEAD.

BRAID RINGS (MAKE 2):
With gold, ch 12, slip st in first ch going through hair braid. Finish off. Weave in ends.

MASK:
Rw 1: With gold, ch 2, 2 sc in second ch from hook. (2)
Rw 2: Ch 1, turn; 2 sc in next 2 sc. (4)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next 2 sc, 2 sc in next sc. (6)
Rws 4-5: Ch 1, turn; sc in each sc across. (6)
Rw 6: Ch 1, turn; 2 sc in next sc, sc in next 4 sc, 2 sc in next sc. (8)
Rw 7: Ch 1, turn; 2 sc in next sc, sc in next 6 sc, 2 sc in next sc. (10)
Rws 8-11: Ch 1, turn; sc in each sc across. (10)
Rw 10: Ch 3, sc in second ch from hook, sc in next ch, skip next sc, slip st in next sc, (slip st, ch 1, sc) in next sc, sc in next 5 sc, slip st in next sc, ch 3, sc in second ch from hook, sc in next ch, slip st in next sc.
Finish off leaving a long tail.
Rw 11: Attach gold in first sc of Rw 8, ch 1, sc in same sc as attachment, sc in next 5 sc. (6)
Rw 12: Ch 1, turn; sc2tog, sc in next 2 sc, sc2tog. (4)
Rws 13-14: Ch 1, turn; sc in each sc across. (4)
Rw 15: Ch 1, turn; sc2tog, sc2tog. (2)
Rw 16: Ch 1, turn; sc2tog. (1)
Finish off. Using lilac, embroider jewels on MASK. Sew MASK to HEAD.  Weave in ends.

EYES:
Using white and gold, embroider EYES on HEAD.

NECKLACE MEDALLION:
Rw 1: With buff, ch 2, 2 sc in second ch from hook. (2)
Rw 2: Ch 1, turn; 2 sc in next 2 sc. (4)
Rw 3: Ch 1, turn; sc2tog, sc2tog. (2)
Rw 4: Ch 1, turn; sc2tog. (1)
Finish off. Weave in ends.

NECKLACE:
Feed 11 yellow facet beads on crochet cotton, sew through Rw 4 of NECKLACE MEDALLION, feed crochet cotton through the last bead before attachment of NECKLACE MEDALLION, feed 10 yellow facet beads. Attach both end of NECKLACE to back of neck of SNARL YAMI. Weave in ends.

FRONT LEGS (MAKE 2):
Rd 1: With white, 9 sc in magic ring. (9)
Rd 2: 2 sc in each sc around. (18)
Rds 3-5: sc in each sc around. (18)
Rd 6: sc in next 6 sc, (sc2tog) 3 times, sc in next 6 sc. (15)
Rd 7: sc in next 5 sc, (sc2tog) 3 times, sc in next 4 sc. (12)
Rds 8-13: sc in each sc around. (12)
Rd 14: sc in each sc around, slip st in first sc. (12)
Rd 15: Ch 1, (sc in next 2 sc, change to black, sc in next sc, change to white) around, slip st in first sc. (12)
Rd 16: Ch 1, (sc2tog, change to black, 2 sc in next sc, change to white) around, slip st in first sc changing to black. (12)
Rd 17: Ch 1, sc in each sc around. (12)
Rd 18: (sc in next 5 sc, 2 sc in next sc) around. (14)
Rd 19: (sc in next 6 sc, 2 sc in next sc) around. (16)
Rd 20: (sc in next 7 sc, 2 sc in next sc) around. (18)
Rd 21: (sc in next 8 sc, 2 sc in next sc) around. (20)
Rds 22-25: sc in each sc around. (20)
BEGIN STUFFING FRONT LEGS FIRMLY. CONTINUE STUFFING FIRMLY AT BOTTOM AND MEDIUM TO LIGHT AT TOP SO IT CAN BE FLATTENED.
Rd 26: (sc in next 8 sc, sc2tog) around. (18)
Rd 27: (sc in next sc, sc2tog) around. (12)
Rd 28: sc2tog around. (6)
Finish off leaving a long tail. Weave tail through sc of Rd 28, pull tightly and secure. Sew FRONT LEGS to BODY. Weave in ends. Using red, embroider toenails on FRONT LEGS. With light blue, embroider star on FRONT LEGS.

FRONT LEG BANDS (MAKE 2):
Rw 1: With gold, ch 17, sc in second ch from hook and in each ch across. (16) Change to black.
Rw 2: Ch 1, turn; sc in each sc across. (16) Change to gold.
Rw 3: Ch 1, turn; sc in each sc across. (16)
Finish off leaving a long tail. Wrap around FRONT LEGS and sew together. Weave in ends.

FRONT LEG LARGE SWIRL WINGS (MAKE 2):
Rd 1: With lilac, ch 2, 4 sc in second ch from hook working around ch. (4)
Rd 2: sc in each sc around. (4) Change to gold.
Rd 3: sc in each sc around. (4)
Rd 4: (sc in next sc, 2 sc in next sc) around. (6)
Rd 5: sc in each sc around. (6)
Finish off. Weave in ends. Stuff FRONT LEG LARGE SWIRL WINGS firmly.

FRONT LEG MEDIUM SWIRL WINGS (MAKE 2):
Rd 1: With lilac, ch 2, 4 sc in second ch from hook working around ch. (4)
Rd 2: sc in each sc around. (4) Change to gold.
Rd 3: sc in each sc around. (4)
Rd 4: (sc in next sc, 2 sc in next sc) around. (6)
Finish off. Weave in ends. Stuff FRONT LEG MEDIUM SWIRL WINGS firmly.

FRONT LEG SMALL SWIRL WINGS (MAKE 2):
Rd 1: With lilac, ch 2, 4 sc in second ch from hook working around ch. (4) Change to gold.
Rd 2: (sc in next sc, 2 sc in next sc) around. (6)
Rd 3: sc in each sc around. (6)
Finish off. Weave in ends. Stuff FRONT LEG SMALL SWIRL WINGS firmly.

FRONT LEG SWIRL BODY (MAKE 2):
Rd 1: With gold, 9 sc in magic ring. (9)
Rd 2: 2 sc in each sc around. (18)
Rd 3: holding next sc on FRONT LEG SWIRL BODY and first sc on FRONT LEG LARGE SWIRL WING together and working through both thicknesses, sc in next 3 sc, holding next sc on FRONT LEG SWIRL BODY and first sc on FRONT LEG MEDIUM SWIRL WING together and working through both thicknesses, sc in next 3 sc, holding next sc on FRONT LEG SWIRL BODY and first sc on FRONT LEG SMALL SWIRL WING together and working through both thicknesses, sc in next 3 sc, sc in next 9 sc on FRONT LEG SWIRL BODY.
Rd 4: sc in next 3 sc on FRONT LEG LARGE SWIRL WING, sc in next 3 sc on FRONT LEG MEDIUM SWIRL WING, sc in next 3 sc on FRONT LEG SMALL SWIRL WING, sc in next 9 sc on FRONT LEG SWIRL BODY. (18)
Rd 5: (sc in next sc, sc2tog) around. (12)
Rd 6: sc2tog around. (6)
Finish off leaving a long tail. Weave tail through sc of Rd 6, pull tightly and secure. Sew FRONT LEG SWIRL BODY to FRONT LEGS. Weave in ends.

HIND LEGS (MAKE 2):
Rd 1: With white, 9 sc in magic ring. (9)
Rd 2: 2 sc in each sc around. (18)
Rds 3-5: sc in each sc around. (18)
Rd 6: (sc2tog) 3 times, sc in next 12 sc. (15)
Rd 7: (sc2tog) 3 times, sc in next 9 sc. (12)
Rds 8-17: sc in each sc around. (12)
Rd 18: sc in next 3 sc, 2 sc in next 2 sc, sc in next 4 sc, sc2tog, sc in next sc. (13)
Rd 19: sc in next 4 sc, 2 sc in next 2 sc, sc in next 5 sc, sc2tog. (14)
Rd 20: sc in next 5 sc, 2 sc in next 2 sc, sc in next 5 sc, sc2tog. (15) Change to black.
Rd 21: (sc in next 4 sc, 2 sc in next sc) around. (18)
Rd 22: (sc in next 2 sc, 2 sc in next sc) around. (24)
Rd 23: (sc in next 3 sc, 2 sc in next sc) around. (30)
Rds 24-26: sc in each sc around. (30)
Rd 27: (sc in next 3 sc, sc2tog) around. (24)
STUFF LOWER PORTION OF HIND LEGS FIRMLY AND UPPER PORTION OF HIND LEGS MODERATELY BECAUSE YOU NEED THE UPPER PORTION TO FLATTEN.
Rd 28: (sc in next 2 sc, sc2tog) around. (18)
Rd 29: (sc in next sc, sc2tog) around. (12)
Rd 30: sc2tog around. (6)
Finish off leaving a long tail. Weave tail through sc of Rd 30, pull tightly and secure. Using red, embroider toenails on HIND LEGS. Sew HIND LEGS to BODY. Weave in ends. Using light blue, embroider moon and star on HIND LEGS.

HIND LEG ANKLE BRACERS (MAKE 2):
Rw 1: With gold, ch 18, dc in third ch from hook, dc in next 3 ch, sc in next 8 ch, dc in next 4 ch. (16) Change to black.
Rw 2: Ch 1, turn; sc in each sc across. (16)
Rw 3: Ch 1, turn; sc in next 6 sc, hdc in next sc, dc in next 2 sc, hdc in next sc, sc in next 6 sc. (16) Change to gold.
Rw 4: Ch 1, turn; sc in each st across. (16)
Finish off leaving a long tail. Wrap around HING LEGS and sew together. Weave in ends. Using lilac, embroider jewels.

LARGE HIND LEG LARGE SWIRL WINGS (MAKE 2):
Rd 1: With lilac, ch 2, 4 sc in second ch from hook working around ch. (4)
Rd 2: sc in each sc around. (4) Change to gold.
Rd 3: sc in each sc around. (4)
Rd 4: (sc in next sc, 2 sc in next sc) around. (6)
Rd 5: sc in each sc around. (6)
Finish off. Weave in ends. Stuff LARGE HIND LEG LARGE SWIRL WINGS firmly.

LARGE HIND LEG MEDIUM SWIRL WINGS (MAKE 2):
Rd 1: With lilac, ch 2, 4 sc in second ch from hook working around ch. (4)
Rd 2: sc in each sc around. (4) Change to gold.
Rd 3: sc in each sc around. (4)
Rd 4: (sc in next sc, 2 sc in next sc) around. (6)
Finish off. Weave in ends. Stuff LARGE HIND LEG MEDIUM SWIRL WINGS firmly.

LARGE HIND LEG SMALL SWIRL WINGS (MAKE 2):
Rd 1: With lilac, ch 2, 4 sc in second ch from hook working around ch. (4) Change to gold.
Rd 2: (sc in next sc, 2 sc in next sc) around. (6)
Rd 3: sc in each sc around. (6)
Finish off. Weave in ends. Stuff LARGE HIND LEG SMALL SWIRL WINGS firmly.

LARGE HIND LEG SWIRL BODY (MAKE 2):
Rd 1: With gold, 9 sc in magic ring. (9)
Rd 2: 2 sc in each sc around. (18)
Rd 3: holding next sc on LARGE HIND LEG SWIRL BODY and first sc on LARGE HIND LEG LARGE SWIRL WING together and working through both thicknesses, sc in next 3 sc, holding next sc on LARGE HIND LEG SWIRL BODY and first sc on LARGE HIND LEG MEDIUM SWIRL WING together and working through both thicknesses, sc in next 3 sc, holding next sc on LARGE HIND LEG SWIRL BODY and first sc on LARGE HIND LEG SMALL SWIRL WING together and working through both thicknesses, sc in next 3 sc, sc in next 9 sc on LARGE HIND LEG SWIRL BODY.
Rd 4: sc in next 3 sc on LARGE HIND LEG LARGE SWIRL WING, sc in next 3 sc on LARGE HIND LEG MEDIUM SWIRL WING, sc in next 3 sc on LARGE HIND LEG SMALL SWIRL WING, sc in next 9 sc on LARGE HIND LEG SWIRL BODY. (18)
Rd 5: (sc in next sc, sc2tog) around. (12)
Rd 6: sc2tog around. (6)
Finish off leaving a long tail. Weave tail through sc of Rd 6, pull tightly and secure. Sew LARGE HIND LEG SWIRL BODY to HIND LEGS. Weave in ends.

SMALL HIND LEG LARGE SWIRL WINGS (MAKE 2):
Rd 1: With lilac, ch 2, 4 sc in second ch from hook working around ch. (4)
Rd 2: sc in each sc around. (4) Change to gold.
Rds 3-4: sc in each sc around. (4)
Finish off. Weave in ends. Stuff SMALL HIND LEG LARGE SWIRL WINGS firmly.

SMALL HIND LEG MEDIUM SWIRL WINGS (MAKE 2):
Rd 1: With lilac, ch 2, 4 sc in second ch from hook working around ch. (4) Change to gold.
Rds 2-3: sc in each sc around. (4)
Finish off. Weave in ends. Stuff SMALL HIND LEG MEDIUM SWIRL WINGS firmly.

SMALL HIND LEG SMALL SWIRL WINGS (MAKE 2):
Rd 1: With lilac, ch 2, 4 sc in second ch from hook working around ch. (4) Change to gold.
Rd 2: sc in each sc around. (4)
Finish off. Weave in ends. Stuff SMALL HIND LEG SMALL SWIRL WINGS firmly.

SMALL HIND LEG SWIRL BODY (MAKE 2):
Rd 1: With gold, 6 sc in magic ring. (6)
Rd 2: 2 sc in each sc around. (12)
Rd 3: holding next sc on SMALL HIND LEG SWIRL BODY and first sc on SMALL HIND LEG LARGE SWIRL WING together and working through both thicknesses, sc in next 2 sc, holding next sc on SMALL HIND LEG SWIRL BODY and first sc on SMALL HIND LEG MEDIUM SWIRL WING together and working through both thicknesses, sc in next 2 sc, holding next sc on SMALL HIND LEG SWIRL BODY and first sc on SMALL HIND LEG SMALL SWIRL WING together and working through both thicknesses, sc in next 2 sc, sc in next 6 sc on SMALL HIND LEG SWIRL BODY.
Rd 4: sc in next 2 sc on SMALL HIND LEG LARGE SWIRL WING, sc in next 2 sc on SMALL HIND LEG MEDIUM SWIRL WING, sc in next 2 sc on SMALL HINDS LEG SMALL SWIRL WING, sc in next 6 sc on SMALL HIND LEG SWIRL BODY. (12)
Rd 5: sc2tog around. (6)
Finish off leaving a long tail. Weave tail through sc of Rd 5, pull tightly and secure. Sew SMALL HIND LEG SWIRL BODY to HIND LEGS. Weave in ends.

TAIL:
Rd 1: With black, ch 2, 4 sc in second ch from hook working around ch. (4)
Rd 2: (sc in next sc, 2 sc in next sc) around. (6)
Rd 3: (sc in next sc, 2 sc in next sc) around. (9)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around. (12)
Rd 5: (sc in next 3 sc, 2 sc in next sc) around. (15)
Rd 6: (sc in next 4 sc, 2 sc in next sc) around. (18)
Rd 7: (sc in next 5 sc, 2 sc in next sc) around. (21)
Rd 8: (sc in next 6 sc, 2 sc in next sc) around. (24)
Rd 9: (sc in next 7 sc, 2 sc in next sc) around. (27)
Rd 10: (sc in next 8 sc, 2 sc in next sc) around. (30)
Rd 11: (sc in next 9 sc, 2 sc in next sc) around. (33)
Rd 12: (sc in next 10 sc, 2 sc in next sc) around. (36)
Rd 13: (sc in next 17 sc, 2 sc in next sc) around. (38)
Rds 14-19: sc in each sc around. (38)
Rd 20: sc in each sc around, slip st in first sc. (38)
Rd 21: Ch 1, sc in next 37 sc, change to white, sc in next sc, slip st in first sc. (38)
Rd 22: Ch 1, turn; 2 sc in next sc, change to black, sc2tog, sc in next 35 sc, slip st in first sc. (38)
Rd 23: Ch 1, turn; sc2tog, sc in next 34 sc, change to white, 2 sc in next sc, sc in next sc, slip st in first sc. (38)
Rd 24: Ch 1, turn; 2 sc in next sc, sc in next 2 sc, change to black, sc2tog, sc in next 33 sc, slip st in first sc. (38)
Rd 25: Ch 1, turn; sc2tog, sc in next 32 sc, change to white, 2 sc in next sc, sc in next 3 sc, slip st in first sc. (38)
Rd 26: Ch 1, turn; 2 sc in next sc, sc in next 4 sc, change to black, sc2tog, sc in next 31 sc, slip st in first sc. (38)
Rd 27: Ch 1, turn; sc2tog, sc in next 30 sc, change to white, 2 sc in next sc, sc in next 5 sc, slip st in first sc. (38)
Rd 28: Ch 1, turn; 2 sc in next sc, sc in next 6 sc, change to black, sc2tog, sc in next 29 sc, slip st in first sc. (38)
Rd 29: Ch 1, turn; sc2tog, sc in next 28 sc, change to white, 2 sc in next sc, sc in net 7 sc, slip st in first sc. (38)
Rd 30: Ch 1, turn; 2 sc in next sc, sc in next 8 sc, change to black, sc2tog, sc in next 27 sc, slip st in first sc. (38)
Rd 31: Ch 1, turn; sc in next 8 sc, (sc2tog, sc in next 8 sc) twice, change to white, sc in next 10 sc, slip st in first sc. (36)
Rd 32: Ch 1, turn; sc in next 10 sc, change to black, (sc in next 11 sc, sc2tog) twice, slip st in first sc. (34)
Rd 33: Ch 1, turn; sc in next 6 sc, (sc2tog, sc in next 7 sc) twice, change to white, sc in next 10 sc, slip st in first sc. (32)
Rd 34: Ch 1, turn; sc in next 10 sc, change to black, (sc2tog, sc in next 9 sc) twice, slip st in first sc. (30)
Rd 35: Ch 1, turn; sc in next 6 sc, (sc2tog, sc in next 5 sc) twice, change to white, sc in next 10 sc, slip st in first sc. (28)
Rd 36: Ch 1, turn; sc in next 10 sc, change to black, (sc in next 7 sc, sc2tog) twice, slip st in first sc. (26)
Rd 37: Ch 1, turn; sc in next 4 sc, (sc2tog, sc in next 4 sc) twice, change to white, sc in next 10 sc, slip st in first sc. (24)
Rd 38: Ch 1, turn; sc in next 4 sc, sc2tog, sc in next 4 sc, change to black, sc in next 6 sc, sc2tog, sc in next 6 sc, slip st in first sc. (22)
Rd 39: Ch 1, turn; sc in next 3 sc, (sc2tog, sc in next 3 sc) twice, change to white, sc in next 9 sc, slip st in first sc. (20)
Rd 40: Ch 1, turn; sc in next 4 sc, sc2tog, sc in next 3 sc, change to black, sc in next 5 sc, sc2tog, sc in next 4 sc, slip st in first sc. (18)
Rd 41: Ch 1, turn; sc in next 2 sc, (sc2tog, sc in next 2 sc) twice, change to white, sc in next 8 sc, slip st in first sc. (16)
Rd 42: Ch 1, turn; sc in next 3 sc, sc2tog, sc in next 3 sc, change to black, sc in next 3 sc, sc2tog, sc in next 3 sc, slip st in first sc. (14)
Finish off leaving a long tail. Stuff TAIL firmly. Sew TAIL to BODY. Weave in ends.

SWORD HANDLE:
Rd 1: With gold, 6 sc in magic ring. (6)
Rd 2: (sc in next 2 sc, 2 sc in next sc) around. (8)
Rd 3: sc2tog around. (4)
Rds 4-10: sc in each sc around. (4)
Finish off leaving a long tail. Insert wooden skewer.

SWORD BLADES (MAKE 2):
Rw 1: With gray, ch 2, sc in second ch from hook. (1)
Rw 2: Ch 1, turn; sc in next sc. (1)
Rw 3: Ch 1, turn; 2 sc in next sc. (2)
Rw 4: Ch 1, turn; sc in each sc across. (2)
Rw 5: Ch 1, turn; 2 sc in next sc, sc in next sc. (3)
Rw 6: Ch 1, turn; hdc2tog, 2 sc in next sc. (3)
Rw 7: Ch 1, turn; 2 sc in next sc, hdc2tog. (3)
Rw 8: Ch 1, turn; hdc2tog, 2 sc in next sc. (3)
Rw 9: Ch 1, turn; 2 sc in next sc, dc in next 2 sts. (4)
Rw 10: Ch 2, turn; dc2tog, hdc in next st, 2 sc in next sc. (4)
Rw 11: Ch 1, turn; 2 sc in next sc, hdc in next st, dc2tog. (4)
Rw 12: Ch 2, turn; dc2tog, hdc in next sc, 2 sc in next sc. (4)
Rw 13: Ch 1, turn; 2 sc in next sc, hdc in next st, dc in next 2 sts. (5)
Rw 14: Ch 2, turn; dc2tog, hdc in next st, sc in next st, 2 sc in next sc. (5)
Rw 15: Ch 1, turn; 2 sc in next sc, sc in next sc, hdc in next st, dc2tog. (5)
Rw 16: Ch 2, turn; dc in next 2 sts, hdc in next st, sc in next st, 2 sc in next sc. (6)
Rw 17: Ch 1, turn; 2 sc in next sc, sc in next 3 sc, sc2tog. (6)
Rw 18: Ch 1, turn; sc2tog, sc in next 3 sc, 2 sc in next sc. (6)
Rw 19: Ch 1, turn; 2 sc in next sc, sc in next 3 sc, sc2tog. (6)
Rw 20: Ch 1, turn; sc2tog, sc in next 3 sc, 2 sc in next sc. (6)
Rw 21: Ch 3, sc in second ch form hook, sc in next ch, sc in next 6 sc. (8)
Rw 22: Ch 1, turn; sc in next 6 sc. (6)
Rws 23-25: Ch 1, turn; sc in each sc across. (6)
Rw 26: Ch 1, turn; 2 sc in next sc, sc in next 4 sc, 2 sc in next sc. (8)
Rw 27: Ch 1, turn; 2 sc in next sc, sc in next 6 sc, 2 sc in next sc. (10)
Rw 28: Ch 1, turn; sc2tog, sc in next 6 sc, sc2tog. (8)
Rw 29: Ch 1, turn; sc2tog, sc in next 4 sc, sc2tog. (6)
Rws 30-35: Ch 1, turn; sc in each sc across. (6) Change to gold after Rw 35.
Rw 36: Ch 1, turn; sc in next sc, change to gray, sc in next 5 sc. (6)
Rw 37: Ch 1, turn; sc in next 3 sc, sc2tog, change to gold, 2 sc in next sc. (6)
Rws 38-40: Ch 1, turn; sc in each sc across. (6)
Finish off leaving a long tail. Using lilac, embroider jewel on each SWORD BLADE. Sew SWORD BLADE together. Sew SWORD BLADES to SWORD HANDLE. Weave in ends.

SWORD BUCKLER:
Rd 1: With buff, ch 10, 2 sc in second ch from hook, sc in next 7 ch, 4 sc in next ch working around ch, working in free loops of foundation ch, sc in next 7 ch, 2 sc in next ch. (22)
Rd 2: 2 sc in next sc, sc in next 9 sc, 2 sc in next 2 sc, sc in next 9 sc, 2 sc in next sc. (26)
Rd 3: 2 sc in next sc, sc in next 2 sc, hdc in next sc, dc in next 2 sc, hdc in next sc, sc in next 5 sc, 2 sc in next 2 sc, sc in next 5 sc, hdc in next sc, dc in next 2 sc, hdc in next sc, sc in next 2 sc, 2 sc in next sc. (30) Change to gold.
Rd 4: sc in next sc, 2 sc in next sc, sc in next 3 sc, 2 sc in next 2 sc, sc in next 7 sc, 2 sc in next 2 sc, sc in next 7 sc, 2 sc in next 2 sc, sc in next 3 sc, 2 sc in next sc, sc in next sc.
Finish off leaving a long tail. Sew SWORD BUCKLER to SWORD BLADES. Weave in ends.

Pokémon are copyright Nintendo and their respective creators.

This pattern is an original pattern by and is © Christjan Bee (August 2020). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint it on your site. You may keep a copy for your own personal use, but you may not sell or distribute it, or sell items made from this pattern.

INCINEROAR

This is another requested Pokemon from a customer through my Etsy shop. Making Incineroar seems to continue a trend I have been, without any intention of, following. This trend is where I make the basic form (Litten) and his Stage 2 Evolution (Incineroar) and not his Stage 1 Evolution (Torracat). This pattern includes the color lists for both Incineroar and Shiny Incineroar.

MATERIALS:
Worsted weight yarn (Shiny alternative in parenthesis): Flame, grey heather, charcoal, white, black (white), orange, spring green, and yellow.
E Crochet hook
Polyester fiberfill
Tapestry needle

ARMS MAKE 2):
Rd 1: With flame, ch 5, sc in second ch from hook, sc in next 2 ch, 2 sc in next ch working around ch, working in free loops of foundation ch, sc in next 3 ch. (8)
Rds 2-4: sc in each sc around. (8)
LEFT ARM:
Rd 5: 3 sc in next 2 sc, sc in next 4 sc, change to orange, sc in next 2 sc, change to flame. (12)
Rd 6: sc in next 10 sc, change to orange, sc in next 2 sc, change to flame. (12)
RIGHT ARM:
Rd 5: 3 sc in next 2 sc, change to orange, sc in next 2 sc, change to flame, sc in next 4 sc. (12)
Rd 6: sc in next 6 sc, change to orange, sc in next 2 sc, change to flame, sc in next 4 sc. (12)
BOTH ARMS:
Rd 7: (sc3tog) twice, sc in next 6 sc. (8)
Rd 8: (sc in next 2 sc, sc2tog) around. (6) Change to black.
Rd 9: (sc in next 2 sc, 2 sc in next sc) around. (8)
Rds 10-11: sc in each sc around. (8) Change to flame after Rd 11.
Rd 12: sc in next 4 sc, 2 sc in next sc, sc in next 3 sc. (9)
Rds 13-14: sc in each sc around. (9) Change to black after Rd 14.
Rd 15: 2 sc in next sc, sc in next 8 sc. (10)
Rds 16-17: sc in each sc around. (10) Change to flame after Rd 17.
Rd 18: sc in each sc around. (10)
Rd 19: (sc in next 4 sc, 2 sc in next sc) around. (12)
BEGIN STUFFING LEFT ARM FIRMLY. CONTINUE STUFFING LEFT ARM FIRMLY AS YOU GO ALONG.
Rd 20: sc in each sc around. (12) Change to black.
Rd 21: sc in each sc around. (12)
Rd 22: (sc in next 5 sc, 2 sc in next sc) around. (14)
Rd 23: sc in each sc around. (14)
Finish off. Weave in ends. Using white, embroider fingernails on ARMS.

TAIL:
Rd 1: With flame, 6 sc in magic ring. (6)
Rd 2: 2 sc in each sc around. (6)
Rds 3-6: sc in each sc around. (6) Change to black after Rd 6.
Rd 7: Working in front loops only, (sc in next sc, 2 sc in next sc) around, slip st in first sc. (18)
Rd 8: (ch 3, sc in second ch from hook, hdc in next ch, skip next sc, slip st in next sc) around.
Finish off. Weave in ends.
Rd 9: Working both loops of Rd 6 and through Rd 7, attach black, ch 1, sc in same sc as attachment, sc in next 11 sc. (12)
Rds 10-14: sc in each sc around. (12) Change to flame after Rd 14.
Rds 15-16: sc in each sc around. (12)
Rd 17: (sc in next 4 sc, sc2tog) around. (10)
Rds 18-20: sc in each sc around. (10) Change to black after Rd 20.
BEGIN STUFFING TAIL FIRMLY. CONTINUE STUFFING TAIL FIRMLY AS YOU GO ALONG.
Rds 21-22: sc in each sc around. (10)
Rd 23: (sc in next 3 sc, sc2tog) around. (8)
Rds 24-26: sc in each sc around. (8) Change to flame after Rd 26.
Rd 27: (sc in next 2 sc, sc2tog) around. (6)
Rds 28-32: sc in each sc around. (6)
Finish off. Weave in ends.

LEGS (MAKE 2):
Rd 1: With flame, ch 6, sc in second ch from hook, sc in next 4 ch. (5)
Rd 2: Working in free loops of foundation ch, 2 sc in next sc, sc in next 4 sc, working in sc of Rw 1, 2 sc in next sc, sc in next 4 sc. (12)
Rds 3-4: sc in each sc around. (12)
Rd 5: (sc in next 4 sc, sc2tog) around. (10)
Rds 6-7: sc in each sc around. (10)
NOW WORKING IN ROWS.
Rw 8: sc in next 7 sc leaving remaining sc of Rd 7 unworked. (7)
Rw 9: Ch 1, turn; sc in next 5 sc, leaving remaining sc unworked. (5)
Rw 10: Ch 1, turn; sc2tog, sc in next sc, sc2tog. (3)
NOW WORKING IN RDS AGAIN.
Rd 11: Ch 1, sc in the side of Rows 8-10, slip st in unworked sc on Rd 7, sc in the side of Rows 8-10, sc in top of sc of Row 10. (14)
Rd 12: sc2tog, (sc in next sc, sc2tog) 4 times. (9)
Rd 13: sc in next 4 sc, sc2tog, sc in next 3 sc. (8) Change to black.
BEGIN STUFFING LEGS FIRMLY. CONTINUE STUFFING LEGS FIRMLY AS YOU GO.
Rds 14-15: sc in each sc around. (8)
Rd 16: 2 sc in next sc, sc in next 7 sc. (9)
Rd 17: sc in each sc around. (9)
Rd 18: sc in next 6 sc, 2 sc in next sc, sc in next 2 sc. (10) Change to flame.
Rds 19-22: sc in each sc around. (10)
Rd 23: sc in next 2 sc, 2 sc in next sc, sc in next 7 sc. (11) Change to black.
Rds 24-28: sc in each sc around. (11) Change to flame after Rd 29.
Rd 29: 2 sc in next sc, sc in next 10 sc. (12)
Rds 30-33: sc in each sc around. (12)
Finish off. Weave in ends.

BODY:
Rd 1: With flame, ch 2, 4 sc in second ch from hook, slip st in first sc. (4)
Rd 2: Ch 1, turn, sc in next sc, sc in next 12 sc on LEFT LEG starting with sc #1, sc in next 2 sc on BODY, sc in next 12 sc on RIGHT LEG starting with sc #1, sc in next sc on BODY. (28)
Rds 3-7: sc in each sc around. (28)
Rd 8: holding next sc on BODY and first sc on TAIL together and working through both thicknesses, sc in next 3 sc, sc in next 25 sc on BODY.
Rd 9: sc in next 3 sc on TAIL, sc in next 25 sc on BODY. (28)
Rd 10: sc in each sc around, slip st in first sc changing to grey heather. (28)
Rd 11: slip st in next sc, ch 1, sc in same sc as slip st, sc in next 27 sc, slip st in first sc. (28)
Rd 12: Ch 1, sc2tog, sc in next 12 sc, sc2tog, change to charcoal, 2 sc in next sc, change to grey heather, sc2tog, sc in next 9 sc, slip st in first sc. (26)
Rd 13: Ch 1, turn; sc in next 10 sc, change to charcoal, sc in next 2 sc, change to grey heather, sc in next 14 sc, slip st in first sc. (26)
BEGIN STUFFING BODY FIRMLY. CONTINUE STUFFING BODY FIRMLY AS YOU GO ALONG.
Rd 14: Ch 1, turn; sc in next 8 sc, 2 sc in next sc, sc in next 3 sc, change to charcoal, sc in next 6 sc, change to grey heather, sc in next 2 sc, 2 sc in next sc, sc in next 5 sc, slip st in first sc. (28)
Rd 15: Ch 1, turn; sc in next 7 sc, change to charcoal, sc in next 10 sc, change to grey heather, sc in next 11 sc, slip st in first sc. (28)
Rd 16: Ch 1, turn; sc in next 8 sc, 2 sc in next sc, sc in next 6 sc, change to charcoal, sc in next 2 sc, change to grey heather, sc in next 6 sc, 2 sc in next sc, sc in next 5 sc, slip st in first sc. (30)
Rd 17: Ch 1, turn; sc in next 12 sc, change to charcoal, sc in next 2 sc, change to grey heather, sc in next 16 sc, slip st in first sc. (30)
Rd 18: Ch 1, turn; sc in next 9 sc, 2 sc in next sc, sc in next 2 sc, change to charcoal, sc in next 10 sc, change to grey heather, sc in next 2 sc, 2 sc in next sc, sc in next 5 sc, slip st in first sc. (32)
Rd 19: Ch 1, turn; sc in next 7 sc, change to charcoal, sc in next 14 sc, change to grey heather, sc in next 11 sc, slip st in first sc. (32)
Rd 20: Ch 1, turn; sc in next 6 sc, 2 sc in next sc, sc in next 4 sc, 2 sc in next sc, sc in next 5 sc, change to charcoal, sc in next 2 sc, change to grey heather, sc in next 5 sc, 2 sc in next sc, sc in next 4 sc, 2 sc in next sc, sc in next 2 sc, slip st in first sc. (36)
Rd 21: Ch 1, turn; sc in next 3 sc, change to flame, holding next sc on BODY and sc #5 of LEFT ARM together and working through both thicknesses, sc in next 4 sc, change to grey heather, sc in next 7 sc on BODY, change to charcoal, sc in next 2 sc, change to grey heather, sc in next 7 sc, change to flame, holding next sc on BODY and sc #13 on RIGHT ARM together and working through both thicknesses, sc in next 4 sc, change to grey heather, sc in next 8 sc on BODY, slip st in first sc.
Rd 22: Ch 1, turn; sc in next 8 sc, sc in next 10 sc on RIGHT ARM, change to grey heather, sc in next 7 sc on BODY, change to charcoal, sc in next 2 sc, change to grey heather, sc in next 7 sc, change to flame, sc in next 10 sc on LEFT ARM, change to grey heather, sc in next 4 sc on BODY, slip st in first sc. (48)
Rd 23: Ch 1, turn; 2 sc in next sc, sc in next 3 sc, change to flame, sc in next 3 sc, (sc2tog) twice, sc in next 3 sc, change to grey heather, sc in next 7 sc, change to charcoal, sc2tog, change to grey heather, sc in next 7 sc, change to flame, sc in next 3 sc, (sc2tog) twice, sc in next 3 sc, change to grey heather, sc in next 8 sc, slip st in first sc. (44)
Rd 24: Ch 1, turn; sc in next 8 sc, change to flame, sc in next 2 sc, (sc2tog) twice, sc in next 2 sc, change to grey heather, sc in next 15 sc, change to flame, sc in next 2 sc, (sc2tog) twice, sc in next 2 sc, change to grey heather, sc in next 5 sc, slip st in first sc. (40)
Rd 25: Ch 1, turn; sc in next 5 sc, change to flame, sc in next 6 sc, change to grey heather, sc in next 15 sc, change to flame, sc in next 6 sc, change to grey heather, sc in next 8 sc, slip st in first sc. (40)
Rd 26: Ch 1, turn; sc in next 8 sc, change to flame, sc in next sc, (sc2tog) twice, sc in next sc, change to grey heather, sc in next 15 sc, change to flame, sc in next sc, (sc2tog) twice, sc in next sc, change to grey heather, sc in next 5 sc, slip st in first sc. (36)
Rd 27: Ch 1, sc in next 6 sc, sc2tog, (sc in next 5 sc, sc2tog) 4 times. (31)
Rd 28: sc in next 5 sc, sc2tog, (sc in next 6 sc, sc2tog) 3 times. (27)
Rd 29: (sc in next sc, sc2tog) around. (18)
Rd 30: (sc in next sc, sc2tog) around. (12)
Rd 31: sc2tog around. (6)
Finish off leaving a long tail. Weave tail through sc of Rd 31, pull tightly and secure. Weave in ends.

ARM WINGS (MAKE 2):
Rw 1: With black, ch 10, slip st in second ch from hook, sc in next 2 ch, 2 sc in next 3 ch, sc in next 2 ch, slip st in next ch. (12)
Rw 2: Ch 1, turn; skip next slip st, slip st in next sc, sc in next 8 sc, slip st in next sc. (10)
Rw 3: Ch 5, sc in second ch from hook, sc in next ch, hdc in next ch, dc in next ch, skip next 3 sts, slip st in next sc, ch 7, sc in second ch from hook, sc in next 2 ch, hdc in next ch, dc in next ch, tr in next ch, skip next 3 sc, slip st in next sc, ch 4, sc in second ch from hook, sc in next ch, hdc in next ch, dc in next ch, skip next sc, slip st in next sc.
Finish off leaving a long tail. Sew ARM WINGS to BODY along upper ridge of shoulder. Weave in ends.

HEAD:
Rd 1: With flame, 8 sc in magic ring. (8)
Rd 2: 2 sc in next 3 sc, 3 sc in next 2 sc, 2 sc in next 3 sc. (18)
Rd 3: (sc in next 2 sc, 2 sc in next sc) around, slip st in first sc. (24)
Rd 4: Ch 1, sc in next 7 sc, change to black, sc in next sc, 2 sc in next sc, change to white, sc2tog, change to black, 2 sc in next sc, change to white, sc2tog, sc in next 3 sc, change to flame, sc in next 7 sc, slip st in first sc. (24)
Rd 5: Ch 1, turn; sc in next 7 sc, change to black, sc in next 10 sc, change to flame, sc in next 7 sc, slip st in first sc. (24)
Rd 6: Ch 1, turn; sc in next 7 sc, change to black, (sc2tog) 5 times, change to flame, sc in next 7 sc, slip st in first sc. (19)
Rd 7: Ch 1, turn; sc in next 7 sc, change to yellow, sc in next 2 sc, change to black, sc in next sc, change to yellow, sc in next 2 sc, change to flame, sc in next 7 sc, slip st in first sc. (19)
Rd 8: Ch 1, turn; sc in next 3 sc, sc2tog, change to black, 2 sc in next sc, change to flame, sc in next sc, change to yellow, sc in next sc, change to black, sc in next sc, change to flame, sc in next sc, change to black, sc in next sc, change to yellow, sc in next sc, change to flame, sc in next sc, change to black, 2 sc in next sc, change to flame, sc2tog, sc in next 3 sc, slip st in first sc. (19)
Rd 9: Ch 1, turn; sc in next 4 sc, change to black, sc in next 5 sc, change to flame, sc in next sc, change to black, sc in next 5 sc, change to flame, sc in next 4 sc, slip st in first changing to black. (19)
Rd 10: Ch 1, turn; sc in next 8 sc, change to flame, sc in next 3 sc, change to black, sc in next 8 sc, slip st in first sc. (19)
Rd 11: Ch 1, turn; sc in next 9 sc, change to flame, sc in next sc, change to black, sc in next 9 sc, slip st in first sc. (19)
Rd 12: Ch 1, turn; (sc in next sc, sc2tog) twice, sc in next 2 sc, sc3tog, sc2tog, (sc in next sc, sc2tog) twice. (12)
STUFF HEAD FIRMLY.
Rd 13: sc2tog around. (6)
Finish off leaving a long tail. Weave tail through sc of Rd 13, pull tightly and secure. Sew HEAD to BODY. Weave in ends. Using spring green, embroider pupils on eyes. Using flame, embroider nose on HEAD.

EYEBROWS (MAKE 2):
Rw 1: With flame, ch 6, slip st in second ch from hook, slip st in next ch, sc in next 3 ch. (5)
Finish off leaving a long tail. Sew EYEBROWS to HEAD. Weave in ends.

EARS (MAKE 2):
Rw 1: With black, ch 4, sc in second ch from hook, hdc in next ch, dc in next ch. (3)
Finish off leaving a long tail. Sew EARS to HEAD. Weave in ends.

SIDEBURNS (MAKE 2):
Rw 1: With flame, ch 12, sc in second ch from hook, hdc in next 2 ch, skip next ch, slip st in next ch, sc in next 6 ch.
Rw 2: Ch 5, turn; sc in second ch from hook, sc in next ch, hdc in next ch, dc in next ch, skip next sc, slip st in next sc, ch 5, sc in second ch from hook, sc in next ch, hdc in next ch, dc in next ch, skip next sc, slip st in next sc, ch 7, sc in second ch from hook, hdc in next 2 ch, dc in next 3 ch, skip next sc, slip st in next sc.
Finish off. Sew first ch of foundation ch directly below EAR curving so that the last ch is sew to last flame sc of Rd 4 of HEAD. Weave in ends.

BELT:
Rw 1: With orange, ch 33, sc in second ch from, sc in next 11 ch, hdc in next 2 ch, dc in next 4 ch, hdc in next 2 ch, sc in next 12 ch. (32)
Rw 2: Ch 3, turn; sc in second ch from hook, hdc in next ch, skip next 2 sc, slip st in next sc, (ch 3, sc in second ch from hook, hdc in next ch, skip next 2 sc, slip st in next sc) 3 times, ch 3, sc in second ch from hook, hdc in next ch, skip next 2 hdc, slip st in next dc, ch 4, sc in second ch, hdc in next ch, dc in next ch, skip next 2 dc, slip st in next dc, ch 3, sc in second ch from hook, hdc in next ch, skip next 2 hdc, slip st in next sc, (ch 3, sc in second ch from hook, hdc in next sc, skip next 2 sc, slip st in next sc) 3 times, ch 3, sc in second ch from hook, hdc in next ch, skip next sc, slip st in next sc.
Finish off leaving a long tail.
Rw 3: Working in free loops of foundation ch, attach orange, ch 1, sc in same ch as attachment, sc in next 11 ch, hdc in next 2 ch, dc in next 4 ch, hdc in next ch, sc in next 12 ch. (32)
Rw 4: Ch 3, turn; sc in second ch from hook, hdc in next ch, skip next 2 sc, slip st in next sc, (ch 3, sc in second ch from hook, hdc in next ch, skip next 2 sc, slip st in next sc) 3 times, sc in next 2 hdc, hdc in next 4 dc, sc in next 2 hdc, slip st in next sc, (ch 3, sc in second ch from hook, hdc in next ch, skip next 2 sc, slip st in next sc) 3 times, ch 3, sc in second ch from hook, hdc in next ch, skip next sc, slip st in next sc.
Finish off. Weave in ends.

BELT FLAME:
Rd 1: With yellow, ch 2, 6 sc in second ch from hook working around ch, ch 2, sc in second ch from hook, slip st in first sc.
Finish off leaving a long tail. Sew BELT FLAME to BELT. Weave in ends. Wrap BELT around waist and sew together. Weave in ends.

Litten, Terracat, Incineroar, Shiny Incineroar, and Pokemon are copyright Nintendo and their respective creators.

This crochet pattern is an original pattern and is © by Christjan Bee (August 2020). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use, but you may not sell or distribute it, or sell items made from this pattern.

TRICERATOPS

This continues a series that I started a few years ago that I was working on. This is the pattern that I came up for a Triceratops. There are others that I am planning to do as well. The Triceratops can be made in any color. I just made this one in light blue because that is what my co-worker wanted. I used yellow safety eyes, but they can be whatever color desired by the person this triceratops is being made for.

MATERIALS:
Worsted Weight Yarn: Light blue, white and black.
E Crochet Hook
Polyester Fiberfil
Tapestry needle
Set of 12 mm safety eyes

BODY:
Rd 1: With light blue, 6 sc in magic ring. (6)
Rd 2: sc in each sc around. (6)
Rd 3: 2 sc in each sc around. (12)
Rd 4: sc in each sc around. (12)
Rd 5: (sc in next sc, 2 sc in next sc) around. (18)
Rd 6: sc in each sc around. (18)
Rd 7: (sc in next 2 sc, 2 sc in next sc) around. (24)
Rd 8: sc in each sc around. (24)
Rd 9: (sc in next 3 sc, 2 sc in next sc) around. (30)
Rd 10: sc in each sc around. (30)
Rd 11: (sc in next 4 sc, 2 sc in next sc) around. (36)
Rds 12-16: sc in each sc around. (36)
Rd 17: (sc in next 4 sc, sc2tog) around. (30)
Rd 18: sc in each sc around. (30)
Rd 19: (sc in next 3 sc, sc2tog) around. (24)
Rd 20: sc in each sc around. (24)
INSERT SAFETY EYES BETWEEN RDS 11 AND 12.
BEGIN STUFFING BODY FIRMLY. CONTINUE STUFFING BODY FIRMLY AS YOU GO ALONG.
Rd 21: (sc in next 3 sc, 2 sc in next sc) around. (30)
Rd 22: (sc in next 4 sc, 2 sc in next sc) around. (36)
Rd 23: (sc in next 5 sc, 2 sc in next sc) around. (42)
Rd 24: (sc in next 6 sc, 2 sc in next sc) around. (48)
Rd 25: sc in each sc around. (48)
Rd 26: (sc in next 7 sc, 2 sc in next sc) around. (54)
Rd 27: sc in each sc around. (54)
Rd 28: (sc in next 8 sc, 2 sc in next sc) around. (60)
Rds 29-44: sc in each sc around. (60)
Rd 45: (sc2tog) 4 times, sc in next 44 sc, (sc2tog) 4 times. (52)
Rd 46: (sc2tog) 4 times, sc in next 36 sc, (sc2tog) 4 times. (44)
Rd 47: (sc2tog) 4 times, sc in next 30 sc, (sc2tog) 3 times. (37)
Rd 48: (sc2tog) 4 times, sc in next 23 sc, (sc2tog) 3 times. (30)
Rd 49: (sc in next 8 sc, sc2tog) around. (27)
Rd 50: (sc in next 7 sc, sc2tog) around. (24)
Rd 51: (sc in next 4 sc, sc2tog) around. (20)
Rd 52: (sc in next 3 sc, sc2tog) around. (16)
Rds 53-55: sc in each sc around. (16)
Rd 56: (sc in next 2 sc, sc2tog) around. (12)
Rds 57-59: sc in each sc around. (12)
Rd 61: (sc in next 2 sc, sc2tog) around. (9)
Rds 62-64: sc in each sc around. (9)
Rd 65: (sc in next sc, sc2tog) around. (6)
Rds 66-68: sc in each sc around. (6)
Finish off leaving a long tail. Weave tail through sc of Rd 68, pull tightly and secure. Weave in ends.

FRILL:
Rw 1: Working over sc of Rd 19 and making sure it is centered with eyes, attach light blue, ch 1, sc in next 20 sc. (20)
Rw 2: Ch 1, turn; (sc in next sc, 2 sc in next sc) around. (30)
Rw 3: Ch 1, turn; (sc in next 5 sc, 2 sc in next sc) around. (35)
Rw 4: Ch 1, turn; (sc in next 6 sc, 2 sc in next sc) around. (40)
Rw 5: Ch 1, turn; (sc in next 4 sc, 2 sc in next sc) around. (48)
Rw 6: Ch 1, turn; (sc in next 5 sc, 2 sc in next sc) around. (56)
Rws 7-8: Ch 1, turn; sc in each sc around. (56)
Finish off. Weave in ends.

LEGS (MAKE 4):
Rd 1: With light blue, 6 sc in magic ring. (6)
Rd 2: 2 sc in each sc around. (12)
Rd 3: (sc in next sc, 2 sc in next sc) around. (18)
Rds 4-14: sc in each sc around. (18)
Finish off leaving a long tail. Stuff LEGS firmly. Sew LEGS to BODY. Weave in ends.

SMALL HORN:
Rd 1: With white, ch 2, 4 sc in second ch from hook working around ch. (4)
Rd 2: 2 sc in each sc around. (8)
Rds 3-6: sc in each sc around. (8)
Finish off leaving a long tail. Stuff SMALL HORN firmly. Sew SMALL HORN to BODY. Weave in ends.

LARGE HORNS (MAKE 2):
Rd 1: With white, ch 2, 4 sc in second ch from hook working around ch. (4)
Rd 2: 2 sc in each sc around. (8)
Rds 3-10: sc in each sc around. (8)
Finish off leaving a long tail. Stuff LARGE HORNS firmly. Sew LARGE HORNS to BODY. Weave in ends.

MOUTH:
Using black, embroider MOUTH on BODY.

This pattern is an original pattern and is © by Christjan Bee (August 2020). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint it on your site. You may keep a copy for your own personal use, but you may not sell or distribute it, or sell items made from this pattern.