MEGA HOUNDOOM

This is the next requested item from a customer of mine on Etsy.  Mega Houndoom is the mega evolution of Houndoom when you have Houndoom is holding a Houndoominite during a battle.  This character was not easy to make.  I used floral wire in the tail so that I could recreate the tail tip pointing up just like the picture that I used to make Mega Houndoom.  I am going to put the floral wire in the instructions but if this is going to be made for a child, I recommend leaving it out.

MATERIALS:
Worsted Weight Yarn:  Black, gray, red, white, and carrot.
E crochet hook
Polyester Fiberfil
Tapestry needle
Floral wire

BODY:
Rd 1: With black, 9 sc in magic ring.  (9)
Rd 2: 2 sc in each sc around.  (18)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (27)
Rd 4: sc in next 5 sc, 2 sc in next sc, (sc in next 6 sc, 2 sc in next sc) 3 times.  (31)
Rd 5: sc in next 6 sc, 2 sc in next sc, (sc in next 5 sc, 2 sc in next sc) 4 times.  (36)
Rds 6-15: sc in each sc around.  (36)
Rd 16: sc in next 13 sc, (sc2tog, sc in next sc) 3 times, sc2tog, sc in next 12 sc.  (32)
Rds 17-18: sc in each sc around.  (32)
Rd 19: sc in next 11 sc, (sc2tog, sc in next sc) twice, sc2tog, sc in next 10 sc.  (29)
Rds 20-21: sc in each sc around.  (29)
Rd 22: sc in next 12 sc, sc2tog, sc in next sc, sc2tog, sc in next 12 sc.  (27)
Rds 23-24: sc in each sc around.  (27)
BEGIN STUFFING BODY AT THIS POINT.  CONTINUE STUFFING FIRMLY AS YOU GO.
Rd 25: (sc in next 7 sc, sc2tog) around.  (24)
Rds 26-27: sc in each sc around.  (24)
Rd 28: (sc in next 2 sc, sc2tog) around.  (18)
Rd 29: (sc in next sc, sc2tog) around.  (12)
Rd 30: sc2tog around.  (6)
Finish off leaving a long tail.  Weave tail through sc of Rd 30, pull tightly, and secure.  Weave in ends.

NECK:
Rd 1: With black, 8 sc in magic ring.  (8)
Rd 2: 2 sc in each sc around.  (16)
Rd 3: (sc in next 7 sc, 2 sc in next sc) around.  (18)
Rd 4: (sc in next 8 sc, 2 sc in next sc) around.  (20)
Rds 5-14: sc in each sc around.  (20)
Rd 15: sc in next 9 sc, 2 dc in next 2 sc, sc in next 9 sc.  (22)
Rd 16: sc in next 10 sts, 2 dc in next 2 sts, sc in next 10 sts.  (24)
Rd 17: sc in next 11 sts, 2 dc in next 2 sts, sc in next 11 sts.  (26)
Finish off leaving a long tail.  Sew NECK to BODY adding stuffing before closing.

MUZZLE:
Rd 1: With carrot, 6 sc in magic ring.  (6)
Rd 2: 2 sc in each sc around.  (12)
Rd 3: (sc in next 3 sc, 2 sc in next sc) around.  (15)
Rds 4-7: sc in each sc around.  (15)
Rd 8: sc in next 2 sc, 2 dc in next sc, dc in next sc, ch 2, dc in top of last dc, ch 2, slip st in top of first dc, sc in next 4 sc, ch 5, slip st in second ch from hook, sc in next 3 ch, sc in next 4 sc, dc in next sc, ch 2, dc in top of last dc, ch 2, slip st in top of first dc, dc in next sc, 2 dc in next sc, sc in next sc.
Finish off leaving a long tail.  Sew MUZZLE to NECK adding stuffing before closing.

HORNS (MAKE 2):
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rds 2-3: sc in each sc around.  (4)
Rd 4: (sc in next sc, 2 sc in next sc) around.  (6)
Rd 5: sc in next sc, sc2tog, sc in next sc, 2 sc in next 2 sc.  (7)
Rd 6: sc in next sc, sc2tog, sc in next sc, 2 sc in next 2 sc, sc in next sc.  (8)
Rds 7-9: sc in next sc, sc2tog, sc in next 2 sc, 2 sc in next sc, sc in next 2 sc.  (8)
Rd 10: sc in each sc around.  (8)
Rd 11: sc in next sc, 2 sc in next sc, sc in next 2 sc, sc2tog, sc in next 2 sc.  (8)
Rd 12: sc in next 2 sc, 2 sc in next sc, sc in next 2 sc, sc2tog, sc in next sc.  (8)
Rds 13-14: sc in next 3 sc, 2 sc in next sc, sc in next 2 sc, dc2tog.  (8)
Rd 15: dc in next 2 sts.
Finish off leaving a long tail.  Stuff HORNS firmly.  Sew HORNS to HEAD.

BELLY:
Rw 1: With carrot, ch 9, 2 sc in second ch from hook, sc in next 6 ch, 2 sc in next ch.  (10)
Rw 2: Ch 1, turn; sc in each sc across.  (10)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next 8 sc, 2 sc in next sc.  (12)
Rw 4: Ch 1, turn; sc in each sc across.  (12)
Rw 5: Ch 1, turn; sc in next 5 sc, dc in next 2 sc, sc in next 5 sc.  (12)
Rws 6-8: Ch 1, turn; sc in next 3 sts, dc in next 6 sts, sc in next 3 sts.  (12)
Rws 9-24: Ch 1, turn; sc in each sc across.  (12)
Rw 25: Ch 1, turn; sc in next 5 sc, sc2tog, sc in next 5 sc.  (11)
Rw 26: Ch 1, turn; sc in each sc across.  (11)
Rw 27: Ch 1, turn; sc in next 5 sc, sc2tog, sc in next 4 sc.  (10)
Rw 28: Ch 1, turn; sc in each sc across.  (10)
Rw 29: Ch 1, turn; sc in next 4 sc, sc2tog, sc in next 4 sc.  (9)
Rw 30: Ch 1, turn; sc in each sc across.  (9)
Finish off leaving a long tail.  Sew BELLY to BODY.

FRONT LEGS (MAKE 2):
Rd 1: With black, 8 sc in magic ring.  (8)
Rd 2: 2 sc in each sc around.  (16)
Rds 3-4: sc in each sc around.  (16)
Rd 5: (sc2tog) 3 times, sc in next 10 sc.  (13)
Rd 6: (sc2tog) 3 times, sc in next 7 sc.  (10)
Rds 7-13: sc in each sc around.  (10)
Rd 14: sc in next 2 sc, 2 sc in next 2 sc, sc in next 6 sc.  (12)
Rd 15: sc in next 3 sc, 2 sc in next 2 sc, sc in next 7 sc.  (14)
Rd 16: sc in next 4 sc, 2 sc in next 2 sc, sc in next 6 sc, sc2tog.  (15)
Rd 17: sc2tog, sc in next 4 sc, 2 sc in next 2 sc, sc in next 7 sc.  (16)
Rds 18-21: sc in each sc around.  (16)
BEGIN STUFFING FRONT LEGS FIRMLY.  CONTINUE STUFFING FIRMLY AT BOTTOM  AND MEDIUM TO LIGHT AT TOP SO IT CAN BE FLATTENED.
Rd 22: sc in next sc, sc2tog, sc in next 6 sc, sc2tog, sc in next 5 sc.  (14)
Rd 23: sc in next sc, sc2tog, sc in next 5 sc, sc2tog, sc in next 4 sc.  (12)
Rd 24: sc2tog around.  (6)
Finish off leaving a long tail.  Weave tail through sc of Rd 24, pull tightly and secure.  Embroider red toe nails on FRONT LEGS.  Sew FRONT LEGS to BODY.

FRONT LEG BANDS (MAKE 4):
Rw 1: With gray, ch 15, sc in second ch from hook and in each ch across.  (14)
Finish off leaving a long tail.  Sew FRONT LEG BANDS to lower section of FRONT LEGS with a 1 sc gap between BAND ends and 2 Rd gap between BANDS.

HIND LEGS (MAKE 2):
Rd 1: With black, 8 sc in magic ring.  (8)
Rd 2: 2 sc in each sc around.  (16)
Rds 3-4: sc in each sc around.  (16)
Rd 5: (sc2tog) 3 times, sc in next 10 sc.  (13)
Rd 6: (sc2tog) 3 times, sc in next 7 sc.  (10)
Rds 7-13: sc in each sc around.  (10)
Rds 14-15: sc2tog, sc in next sc, 2 sc in next 2 sc, sc in next 3 sc, sc2tog.  (10)
Rds 16-17: sc2tog, sc in next 2 sc, 2 sc in next 2 sc, sc in next 2 sc, sc2tog.  (10)
Rd 18: 2 sc in next sc, sc in next 3 sc, 2 sc in next 2 sc, sc in next 3 sc, 2 sc in next sc.  (14)
Rd 19: (2 sc in next 2 sc, sc in next 5 sc) around.  (18)
Rds 20-23: sc in each sc around.  (18)
STUFF LOWER PORTION OF HIND LEGS FIRMLY AND UPPER PORTION OF HIND LEGS MODERATELY BECAUSE YOU NEED THE UPPER PORTION TO FLATTEN.
Rd 24: (sc in next 4 sc, sc2tog) around.  (15)
Rd 25: (sc in next 3 sc, sc2tog) around.  (12)
Rd 26: sc2tog around.  (6)
Finish off leaving a long tail.  Weave tail through sc of Rd 26, pull tightly and secure.  Embroider red toe nails on HIND LEGS.  Sew HIND LEGS to BODY.

NECK RING:
Rw 1: With gray, ch 31, sc in second ch from hook and in each ch across.  (30)
Finish off leaving a long tail.  Wrap NECK RING around NECK and together and to NECK.

LARGE BREASTPLATE TOOTH:
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rds 2-3: sc in each sc around.  (4)
Finish off.

SMALL BREASTPLATE TEETH (MAKE 2):
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Finish off when finishing the first SMALL BREASTPLATE TEETH.  Do not finish after make second SMALL BREASTPLATE TEETH.

BREASTPLATE:
Rd 1: sc in next sc on SMALL BREASTPLATE TOOTH 2, sc together the next sc of SMALL BREASTPLATE TOOTH 2 and the next sc on LARGE BREASTPLATE TOOTH, sc together the next sc of LARGE BREASTPLATE TOOTH and the next sc on SMALL BREASTPLATE TOOTH 1, sc in next 2 sc of SMALL BREASTPLATE TOOTH 1, sc together the next sc of SMALL BREASTPLATE TOOTH 1 and the next sc on LARGE BREASTPLATE TOOTH, sc together the next sc of LARGE BREASTPLATE TOOTH and the next sc on SMALL BREASTPLATE TOOTH 2, sc in next sc on SMALL BREASTPLATE TOOTH 2.  (8)
Rd 2: 2 sc in next sc, sc in next 2 sc, 2 sc in next 2 sc, sc in next 2 sc, 2 sc in next sc.  (12)
Rd 3: sc in each sc around.  (12)
Rd 4: (2 sc in next 2 sc, sc in next 4 sc) around.  (16)
Rd 5: sc in next sc, 2 sc in next 2 sc, sc in next 6 sc, 2 sc in next sc, sc in next 5 sc.  (20)
Rd 6: sc in each sc around.  (20)
Rd 7: sc in next sc, (sc2tog) twice, sc in next 6 sc, (sc2tog) twice, sc in next 5 sc.  (16)
Rd 8: [(sc2tog) twice, sc in next 4 sc] around.  (12)
Finish off leaving a long tail.  Stuff BREASTPLATE lightly so that the BREASTPLATE stays flat.  Sew BREASTPLATE to NECK RING.

LARGE BREASTPLATE SPIKES (MAKE 2):
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (6)
Rd 4: sc in each sc around.  (6)
Rd 5: (sc in next 2 sc, 2 sc in next sc) around.  (8)
Rds 6-15: sc in each sc around.  (8)
Finish off leaving a long tail.  Stuff LARGE BREASTPLATE SPIKES firmly.  Sew LARGE BREASTPLATE SPIKES to BREASTPLATE.

SMALL BREASTPLATE SPIKES (MAKE 2):
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (6)
Rds 4-12: sc in each sc around.  (6)
Finish off leaving a long tail.  Stuff SMALL BREATPLATE SPIKES firmly.  Sew SMALL BREASTPLATE SPIKES to BREASTPLATE.

MOUTH, TEETH, AND EYES:
Embroider MOUTH, TEETH, and EYES on MEGA HOUNDOOM.

TUCKS (MAKE 2):
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (6)
Rd 4: sc in each sc around.  (6)
Rd 5: (sc in next 2 sc, 2 sc in next sc) around.  (8)
Rds 6-7: sc in next 2 sc, dc in next 4 sts, sc in next 2 sc.  (8)
Rds 8-9: sc in each sc around.  (8)
Rd 10: sc in next 3 sc, dc in next st, 2 dc in next 2 sts, dc in next st, sc in next st.  (10)
Rds 11-12: sc in next 3 sts, dc in next 6 sts, sc in next st.  (10)
Rd 13: sc in next 3 sts, dc in next 2 sts, 2 dc in next 2 sts, dc in next 2 sts, sc in next st.  (12)
Rd 14: sc in next 3 sts, dc in next 8 sts, dc in next st.  (12)
Rds 15-29: sc in each st around.  (12)
BEGIN STUFFING TUCKS AT THIS POINT.
Finish off leaving a long tail.  Sew open end of TUCKS together stuffing before closing..  Sew TUCKS to BODY.

SPINE BUMP #1:
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (6)
Rd 4: sc in each sc around.  (6)
Rd 5: (sc in next 2 sc, 2 sc in next sc) around.  (8)
Rd 6: sc in each sc around.  (8)
Rd 7: (sc in next 3 sc, 2 sc in next sc) around.  (10)
Rds 8-23: sc in each sc around.  (10)
BEGIN STUFFING SPINE BUMP #1 LIGHTLY SO THAT IT FLATTENS AT CENTER.  CONTINUE STUFFING AS YOU GO ALONG.
Rd 24: (sc in next 3 sc, sc2tog) around.  (8)
Rd 25: sc in each sc around.  (8)
Rd 26: (sc in next 2 sc, sc2tog) around.  (6)
Rd 27: sc in each sc around.  (6)
Rd 28: (sc in next sc, sc2tog) around.  (4)
Rd 29: sc in each sc around.  (4)
Finish off leaving a long tail.  Weave tail through sc of Rd 29, pull tightly, and secure.  Sew SPINE BUMP #1 to BODY across back up against TUCKS.

SPINE BUMP #2:
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (6)
Rd 4: sc in each sc around.  (6)
Rd 5: (sc in next 2 sc, 2 sc in next sc) around.  (8)
Rds 6-18: sc in each sc around.  (8)
BEGIN STUFFING SPINE BUMP #2 LIGHTLY SO THAT IT FLATTENS AT CENTER.  CONTINUE STUFFING AS YOU GO ALONG.
Rd 19: (sc in next 2 sc, sc2tog) around.  (6)
Rd 20: sc in each sc around.  (6)
Rd 21: (sc in next sc, sc2tog) around.  (4)
Rd 22: sc in each sc around.  (4)
Finish off leaving a long tail.  Weave tail through sc of Rd 22, pull tightly, and secure.  Sew SPINE BUMP #2 to BODY across back up against SPINE BUMP #1.

SPINE BUMP #3:
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (6)
Rds 4-14: sc in each sc around.  (6)
BEGIN STUFFING SPINE BUMP #3 LIGHTLY SO THAT IT FLATTENS AT CENTER.  CONTINUE STUFFING AS YOU GO ALONG.
Rd 15: (sc in next sc, sc2tog) around.  (4)
Rd 16: sc in each sc around.  (4)
Finish off leaving a long tail.  Weave tail through sc of Rd 16, pull tightly and secure.  Sew SPINE BUMP #3 to BODY across back up against SPINE BUMP #2.

TAIL GRAY SPIKES (MAKE 3):
Rd 1: With gray, 8 sc in magic ring.  (8)
Rd 2: slip st in next sc, ch 3, slip st in second ch from hook, sc in next ch, sc in same sc as first slip, sc in next 7 sc.
Rd 3: sc2tog around.  (4)
Finish off leaving a long tail.  Sew the three TAIL GRAY SPIKES together.

TAIL:
Rw 1: With black, ch 21, working over floral wire, sc in second ch from hook and in each ch across.  (20)
Finish off leaving a long tail.  Pull tail through TAIL GRAY SPIKES and sew to BODY.

TAIL POINTS (MAKE 2):
Rw 1: With black, ch 8, sc2tog in second and third ch from hook, sc in next 5 ch.  (6)
Rw 2: Ch 1, turn; 2 sc in next sc, sc in next 3 sc, sc2tog.  (6)
Rw 3: Ch 1, turn; sc2tog, sc in next 3 sc, 2 sc in next sc.  (6)
Finish off leaving a long tail.  Sew TAIL POINTS to TAIL.

Mega Houndoom and Pokemon are copyright Nintendo.

This pattern is an original pattern by Christjan Bee (October 2016). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint it on your site. You may keep a copy for your own personal use but you may not sell or distribute it, or sell items made from this pattern.

RHYPERIOR

I have recently been contacted by an obsessed Pokemon plush fan on my Etsy store.  He has been making requests for about a month and a half.  This was his first request that he made.  I will post the others as I get them made for him.

MATERIALS:
Worsted Weight Yarn:  Charcoal, gray, black and carrot.
E crochet hook
Polyester Fiberfil
Tapestry needle
Glue

FINGERS (MAKE 6):
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (6)
Finish off.

BREASTPLATE:
Rw 1: With gray, ch 5, 2 sc in second ch from hook, sc in next 2 ch, 2 sc in next sc.  (6)
Rw 2: Ch 1, turn; 2 sc in next sc, sc in next 4 sc, 2 sc in next sc.  (8)
Rw 3: Ch 1, turn; 2 sc in next sc, sc in next 6 sc, 2 sc in next sc.  (10)
Rw 4: Ch 1, turn; sc in each sc across.  (10)
Finish off.

ARMS (MAKE 2):
Rd 1: With charcoal, 6 sc in magic ring.  (6)
Rd 2: 2 sc in each sc around.  (12)
Rd 3: sc in next 3 sc working through both thicknesses of ARM and FINGER 1, sc in next 3 sc working through both thicknesses of ARM and FINGER 2, sc in next 3 sc working through both thicknesses of ARM and FINGER 3, sc in next 3 sc in just ARM.  (12)
Rd 4: (sc in next sc, 2 sc in next sc) around.  (18)
Rds 5-8: sc in each sc around.  (18)
Rd 9: (sc in next sc, sc2tog) around.  (12)
Rds 10-11: sc in each sc around.  (12)
Rd 12: sc in next 5 sc, 2 sc in next 3 sc, sc in next 4 sc.  (15)
Rds 13-14: sc in each sc around.  (15)
Rd 15: Ch 1, turn; sc in next 12 sc.  (12)
Rd 16: Ch 1, turn; sc in next 12 sc, ch 3, slip st in first sc (ARMHOLE MADE).
Rd 17: Ch 1, sc in next 12 sc, sc in next 3 ch.  (15)
Rds 18-19: sc in each sc around.  (15)
Rd 20: sc in next 6 sc, (sc2tog) twice, sc in next 5 sc.  (13)
Rd 21: sc in next 6 sc, sc2tog, sc in next 5 sc.  (12)
BEGIN STUFFING ARM.  ADD STUFFING AS YOU CONTINUE.
Rd 22: sc in next 5 sc, (sc2tog) twice, sc in next 3 sc.  (10)
Rd 23: sc in each sc around.  (10)
Rd 24: sc in next 5 sc, sc2tog, sc in next 3 sc.  (9)
Rd 25: sc in next 4 sc, (sc2tog) twice, sc in next sc.  (7)
Rd 26: sc in next 4 sc, sc2tog, sc in next sc.  (6)
Rd 27: sc in each sc around.  (6)
Finish off leaving a long tail.  Weave tail through sc of Rd 27, pull tight, and secure.  Weave in ends.

SHOULDER:
Rd 1: Working around ARMHOLE, evenly complete 10 sc around ARMHOLE.  (10)
Rds 2-6: sc in each sc around.  (10)
Finish off.

BODY:
Rd 1: With charcoal, 8 sc in magic ring.  (8)
Rd 2: 2 sc in each sc around.  (16)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (24)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around.  (32)
Rd 5: (sc in next 3 sc, 2 sc in next sc) around.  (40)
Rd 6: (sc in next 4 sc, 2 sc in next sc) around.  (48)
Rd 7: (sc in next 5 sc, 2 sc in next sc) around.  (56)
Rds 8-20: sc in each sc around.  (56)
Rd 21: sc in next 6 sc, sc2tog, sc in next 7 sc, sc2tog, sc in next 28 sc, sc2tog, sc in next 7 sc, sc2tog.  (52)
Rd 22: sc in next 6 sc, sc2tog, sc in next 5 sc, sc2tog, sc in next 28 sc, sc2tog, sc in next 5 sc, sc2tog.  (48)
Rd 23: sc in each sc around.  (48)
Rd 24: slip st in next sc, ch 1 , turn, skip slip st, sc2tog, sc in next 3 sc, sc2tog, sc in next 2 sc, holding next sc of BODY and marked sc of SHOULDER together and working through both thicknesses, sc in next 3 sc, sc in next 20 sc of BODY, holding next sc of BODY and marked sc of SHOULDER together and working through both thicknesses, sc in next 3 sc, sc in next 2 sc of BODY, sc2tog, sc in next 3 sc, sc2tog, slip st in next sc.
Rd 25: Ch 1, turn; skip st slip st, sc2tog, sc in next 2 sc, sc2tog, sc in next sc, sc in next sc on SHOULDER, working behind same SHOULDER, sc in next sc, ch 1, skip next sc, sc in next sc, skip next 5 sc on SHOULDER, sc in next sc, sc in next 20 sc on BODY, sc in next sc on SHOULDER, working behind same SHOULDER, sc in next sc, ch 1, skip next sc, sc in next sc, skip next 5 sc on SHOULDER, sc in next sc, sc in next sc on BODY, sc2tog, sc in next 2 sc, sc2tog.
Rd 26: Ch 1, turn; sc in next sc, sc2tog, sc in next 3 sc, sc in next sc on SHOULDER, working behind same SHOULDER, sc in next sc, ch 2, sc in next sc, skip next 3 sc on SHOULDER, sc in next sc, sc in next sc on BODY, sc2tog, sc in next 16 sc, sc2tog, sc in next sc, sc in next sc on SHOULDER, working behind same SHOULDER, sc in next sc, ch 2, sc in next sc, skip next 3 sc on SHOULDER, sc in next sc, sc in next 3 sc on BODY, sc2tog, sc in next sc.
Rd 27: Ch 1, turn; sc in next 2 sc, sc2tog, sc in next 2 sc, sc in next 3 sc on SHOULDER, sc in next 2 sc on BODY, sc2tog, sc in next 14 sc, sc2tog, sc in next 2 sc, sc in next 3 sc on SHOULDER, sc in next 2 sc on BODY, sc2tog, sc in next 2 sc.  (36)
FINISH OFF LEAVING A LONG TAIL.  USING TAIL, SEW BREASTPLATE IN PLACE OVERLAPING OUTSIDE EDGE OF BREASTPLATE AND INSIDE EDGE OF BODY BY 1 SC.
BEGIN STUFFING BODY.  CONTINUE TO ADD STUFFING AS YOU GO.
Rd 28: Attach charcoal in center back, ch 1, sc in next 8 sc, sc2tog, sc in next 3 sc, sc2tog, sc in next 2 sc, sc in next sc working through both thicknesses of next sc of BODY and first sc of BREASTPLATE, sc in next 8 sc of BREASTPLATE, sc in next sc working through both thicknesses of next sc of BODY and last sc of BREASTPLATE, sc in next 2 sc on BODY, sc2tog, sc in next 3 sc, sc2tog, sc in next 8 sc.  (40)
Rd 29: sc in next 7 sc, sc2tog, sc in next 3 sc, sc2tog, sc in next 12 sc, sc2tog, sc in next 3 sc, sc2tog, sc in next 7 sc.  (36)
Rd 30: sc in next 6 sc, sc2tog, sc in next 3 sc, sc2tog, sc in next 10 sc, sc2tog, sc in next 3 sc, sc2tog, sc in next 6 sc.  (32)
Rd 31: sc in next 5 sc, sc2tog, sc in next 3 sc, sc2tog, sc in next 8 sc, sc2tog, sc in next 3 sc, sc2tog, sc in next 5 sc.  (28)
Rds 32-33: sc in each sc around.  (28)
Rd 34: (sc in next 5 sc, sc2tog) around.  (24)
Rd 35: (sc in next 4 sc, sc2tog) around.  (20)
Rd 36: (sc in next 3 sc, sc2tog) around.  (16)
Rd 37: (sc in next 2 sc, sc2tog) around.  (12)
Rd 38: (sc in next sc, sc2tog) around.  (8)
Finish off leaving a long tail.  Weave tail through sc of Rd 38, pull tightly, and secure.  Weave in ends.

FACE:
Rd 1: With charcoal, 6 sc in magic ring.  (6)
Rd 2: 2 sc in next sc, sc in next sc, 2 sc in next 2 sc, sc in next sc, 2 sc in next sc.  (10)
Rd 3: (2 sc in next sc, sc in next sc) twice, 2 sc in next 2 sc, sc in next 3 sc, 2 sc in next sc.  (15)
Rd 4: 2 sc in next sc, sc in next 2 sc, 2 sc in next 2 sc, sc in next 2 sc, 2 sc in next 2 sc, sc in next 5 sc, 2 sc in next sc.  (21)
Rd 5: hdc in next 4 sc, 2 hdc in next sc, hdc in next 2 sc, 2 hdc in next sc, hdc in next 4 sc, sc in next 9 sc.  (23)
Rd 6: sc in next 2 sts, hdc in next 10 sts, sc in next 11 sts.  (23)
Rd 7: hdc in next 2 sts, dc in next 2 sts, 2 dc in next st, dc in next 4 sts, 2 dc in next st, dc in next 2 sts, hdc in next 2 sts, sc in next 9 sts.  (25)
Finish off leaving a long tail.  Sew FACE to BODY adding stuffing before closing.

LARGE HORN:
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (6)
Rd 4: sc in each sc around.  (6)
Rd 5: (sc in next 2 sc, 2 sc in next sc) around.  (8)
Rd 6: sc in each sc around.  (8)
Rd 7: sc in next 4 sc, dc in next 4 sc.  (8)
Finish off leaving a long tail.  Sew LARGE HORN to FACE adding stuffing before closing.

SMALL HORN:
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Rd 2: sc in each sc around.  (4)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (6)
Finish off leaving a long tail.  Sew SMALL HORN to FACE adding stuffing before closing.

MOUTH, TEETH, AND EYES:
Embroider MOUTH, TEETH, and EYES on RHYPERIOR.

LEGS (MAKE 2):
Rd 1: With charcoal, ch 8, 2 sc in second ch from hook, sc in next 5 ch, 3 sc in next ch, working in free loops of foundation ch, sc in next 6 ch.  (16)
Rd 2: 2 sc in next 2 sc, sc in next 5 sc, 2 sc in next 3 sc, sc in next 5 sc, 2 sc in next sc.  (22)
Rd 3: (sc in next sc, 2 sc in next sc) twice, sc in next 6 sc, 3 sc in next sc, sc in next 2 sc, 3 sc in next sc, sc in next 7 sc, 2 sc in next sc.  (29)
Rd 4: working in back loops only, sc in each sc around.  (29)
Rds 5-6: sc in each sc around.  (29)
Rd 7: (sc in next sc, sc2tog) twice, sc in next 7 sc, sc3tog, sc in next 2 sc, sc3tog, sc in next 6 sc, sc2tog.  (22)
Rd 8: (sc2tog) twice, sc in next 5 sc, (sc2tog) 4 times, sc in next 5 sc.  (16)
Rd 9: (sc in next 3 sc, 2 sc in next sc) around.  (20)
Rd 10: (sc in next 4 sc, 2 sc in next sc) around.  (25)
Rd 11: (sc in next 5 sc, 2 sc in next sc) around.  (30)
Rds 12-14: sc in each sc around.  (30)
BEGIN STUFFING LEGS AT THIS POINT.  CONTINUE ADDING STUFFING AS YOU GO ALONG.
Rd 15: (sc in next sc, sc2tog) around.  (20)
Rd 16: (sc2tog) around.  (10)
Finish off leaving a long tail.  Weave tail through sc of Rd 16, pull tightly and secure.  Sew LEGS to BODY.

TOE NAILS (MAKE 4):
Rd 1: With gray, ch 2, 4 sc in second ch from hook working around ch.  (4)
Finish off.  Glue TOE NAILS to LEGS.

TAIL:
Rd 1: With charcoal, 6 sc in magic ring.  (6)
Rd 2: 2 sc in each sc around.  (12)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (18)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around.  (24)
Rds 5-8: sc in each sc around.  (24)
Rd 9: (sc in next 2 sc, sc2tog) around.  (18)
Rd 10: (sc in next sc, sc2tog) around.  (12)
BEGIN STUFFING TAIL AT THIS POINT.
Rd 11: (sc2tog) around.  (6)
Rds 12-13: sc in each sc around.  (6)
Rd 14: (sc in next sc, 2 sc in next sc) around.  (9)
Rds 15-16: sc in each sc around.  (9)
Rd 17: (sc in next 2 sc, 2 sc in next sc) around.  (12)
Rd 18: sc in each sc around.  (12)
Rd 19: (sc in next 3 sc, 2 sc in next sc) around.  (15)
Rd 20: sc in each sc around.  (15)
Rd 21: (sc in next 4 sc, 2 sc in next sc) around.  (18)
Rd 22: (sc in next 5 sc, 2 sc in next sc) around.  (21)
Rd 23: (sc in next 6 sc, 2 sc in next sc) around.  (24)
Rd 24: (sc in next 7 sc, 2 sc in next sc) around.  (27)
Rd 25: (sc in next 8 sc, 2 sc in next sc) around.  (30)
Rd 26: slip st in next sc, ch 1, turn, skip next slip st, sc2tog, sc in next 11 sc, sc2tog, slip st in next sc.  (13)
Rd 27: Ch 1, turn; skip next slip st, sc2tog, sc in next 9 sc, sc2tog.  (11)
Rd 28: Ch 1, turn; sc2tog, sc in next 7 sc, sc2tog.  (9)
Rd 29: Ch 1, turn; sc2tog, sc in next 5 sc, sc2tog.  (7)
Rd 30: Ch 1, turn; sc2tog, sc in next 3 sc, sc2tog.  (5)
Rd 31: Ch 1, turn; sc2tog, sc in next sc, sc2tog.  (3)
Finish off leaving a long tail.  Sew TAIL to BODY adding any stuffing needed to achieve desired shape before closing.

LEGS PADS (MAKE 4):
Rw 1: With carrot, ch 3, sc in second ch from hook, sc in next ch.  (2)
Rw 2: Ch 1, turn; sc in each sc across.  (2)
Rd 3: Ch 1, turn; sc in around outer edge of LEG PADS.
Finish off.  Weave in ends.  Glue one LEG PAD on front and one LEG PAD on side of top section of LEGS.

ARM PLATES (MAKE 2):
Rd 1: With carrot, ch 3, sc in second ch from hook, sc in next ch.  (2)
Rws 2-8: Ch 1, turn; sc in each sc across.  (2)
Rd 9: Ch 1, turn; sc evenly around outer edge of ARM PLATES.
Finish off.  Weave in ends.  Glue ARM PLATES to front of ARMS.

LOWER FRONT PLATE:
Rw 1: With carrot, ch 3, sc in second ch from hook, sc in next ch.  (2)
Rws 2-4: Ch 1, turn; sc in each sc across.  (2)
Rd 5: Ch 1, turn; sc evenly around outer edge of LOWER FRONT PLATE.
Finish off.  Weave in ends.  Glue LOWER FRONT PLATE to front of BODY.

CHEST PLATES (MAKE 10):
Rw 1: With carrot, ch 5, sc in second ch from hook, sc in next 3 ch.  (4)
Rws 2-4: Ch 1, turn; sc in each sc around.  (4)
Rd 5: Ch 1, turn; sc evenly around outer edge of CHEST PLATES.
Finish off.  Weave in ends.  Glue CHEST PLATES around BODY.

SHOULDER AND HEAD PLATES (MAKE 3):
Rw 1: With carrot, ch 4, sc in second ch from hook, sc in next 2 ch.  (3)
Rws 2-3: Ch 1, turn; sc in each sc across.  (3)  Change to charcoal after Rw 3.
Rw 4: Ch 1, turn; sc in each sc across.  (3)  Change to carrot.
Rws 5-12: Ch 1, turn; sc in each sc across.  (3)  Change to charcoal after Rw 7.
Rw 13: Ch 1, turn; sc in each sc across.  (3)  Change to carrot.
Rws 14-16: Ch 1, turn; sc in each sc across.  (3)  Change to charcoal after Rw 16.
Rd 17: Ch 1, turn; sc evenly around outer edge of SHOULDER AND HEAD PLATES.
Finish off.  Weave in ends.  Glue SHOULDER PLATES to BODY.  Glue HEAD PLATE to HEAD.

Rhyperior and Pokemon are copyright Nintendo.

This pattern is an original pattern by Christjan Bee (October 2016). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint it on your site. You may keep a copy for your own personal use but you may not sell or distribute it, or sell items made from this pattern.

POLIWAG

My wife and daughters have been obsessed with Pokemon Go since it came out.  My oldest daughter caught a Poliwag recently.  She asked me to make one for her.  This is the pattern for Poliwag that I came up with.

MATERIALS:
Worsted Weight Yarn:  Blue, white, black, and pink.
E crochet hook
Polyester Fiberfil
Tapestry needle

BODY:
Rd 1: With blue, 6 sc in magic ring.  (6)
Rd 2: 2sc in each sc around.  (12)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (18)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around.  (24)
Rd 5: (sc in next 3 sc, 2 sc in next sc) around.  (30)
Rd 6: (sc in next 4 sc, 2 sc in next sc) around.  (36)
Rd 7: (sc in next 5 sc, 2 sc in next sc) around.  (42)
Rd 8-18: sc in each sc around.  (42)
BEGIN STUFFING BODY.  CONTINUE TO ADD STUFFING AS YOU GO.
Rd 19: (sc in next 5 sc, sc2tog) around.  (36)
Rd 20: (sc in next 4 sc, sc2tog) around.  (30)
Rd 21: (sc in next 3 sc, sc2tog) around.  (24)
Rd 22: (sc in next 2 sc, sc2tog) around.  (18)
Rd 23: (sc in next sc, sc2tog) around.  (12)
Rd 24: sc2tog around.  (6)
Finish off leaving a long tail.  Weave tail through sc of Rd 24, pull tightly, and secure.  Weave in ends.

BELLY:
Rd 1: With white, 6 sc in magic ring.  (6)
Rd 2: 2 sc in each sc around.  (12)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (18)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around.  (24)
Rd 5: (sc in next 3 sc, 2 sc in next sc) around.  (30)
Finish off leaving a long tail.  SWIRL:  Surface slip st around BELLY starting in center continuing all the way around.  Sew BELLY to BODY.

FEET (MAKE 2):
Rd 1: With blue, 6 sc in magic ring.  (6)
Rd 2: 2 sc in each sc around.  (12)
Rds 3-5: sc in each sc around.  (12)
Rd 6: (sc in next sc, sc2tog) around.  (8)
Rds 7-8: sc in each sc around.  (8)
Finish off leaving a long tail.  Do not stuff FEET.  Flatten and sew to bottom of BODY.

TAIL:
Rw 1: With blue, ch 12, sc in second ch from hook and in each ch across.  (11) Change to white.
Rw 2: Ch 1, turn; sc in next 3 sc, hdc in next 3 sc, dc in next 3 sc, tr in next sc, 4 tr in next sc, turn work, work in free loops of foundation ch, 4 tr in first ch, tr in next ch, dc in next 3 ch, hdc in next 3 ch, sc in next 3 ch.
Finish off leaving a long tail.  Sew TAIL to BODY.

MOUTH:
Rd 1: With pink, 8 sc in magic ring.  (8)
Finish off leaving a long tail.  Sew MOUTH to POLIWAG just above the BELLY.

EYES:
Embroider EYES on POLIWAG.  OPTIONAL:  Craft felt could also be used to make the EYES.

Poliwag and Pokemon are copyright Nintendo.

This pattern is an original pattern by Christjan Bee (October 2016). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint it on your site. You may keep a copy for your own personal use but you may not sell or distribute it, or sell items made from this pattern.

LITTLE OCTOPUS

My wife recently spotted a little octopus online.  She kept bugging me to make one for her.  I finally broken down and designed this cute little octopus for her.  Unfortunately, it lead to me making her five of them in five different colors.  The one in the picture is pink because that was the color that she picked for the first one.

MATERIALS:
Worsted Weight Yarn:  Body color and black
F crochet hook
Polyester Fiberfill
Tapestry needle
1 set of 10 mm safety eyes

BODY:
Rd 1: With body color, 8 sc in magic ring, slip st in first sc to join.  (8)
Rd 2: 2 sc in each sc around.  (16)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (24)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around.  (32)
Rds 5-10: sc in each sc around.  (32)
INSERT SAFETY EYES BETWEEN RDS 7 AND 8 WITH 5 SC BETWEEN EACH EYE.
Rd 11: (sc in next 2 sc, sc2tog) around.  (24)
Rd 12: (sc in next sc, ch 8, dc in third ch from hook, dc in next 5 ch, sc in next 2 sc) around.  (24 sc, 8 legs)
Rd 13: (sc in next sc, sc2tog) around.  (16)
BEGIN STUFFING LITTLE OCTOPUS.  CONTINUE TO ADD STUFFING AS YOU GO.
Rd 14: sc2tog around.  (8)
Rd 15: (sc in next 2 sc, sc2tog) around.  (6)
Finish off leaving a long tail.  Weave tail through sc of Rd 15, pull tightly, secure.  Weave in ends.

MOUTH:
Embroider mouth on LITTLE OCTOPUS with black yarn.

This crochet pattern is an original pattern and is © by Christjan Bee (September 2016).  Please do not claim this pattern as your own.  If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site.  You may print and keep a copy for your own personal use but you may not sell or distribute it, o sell items made from this pattern

ROBIN (FIRE EMBLEM)

This is an adaptation of my seamless doll in a more masculine form.  This doll was a request from a co-worker for her son.  Robin is a fictional character from the Fire Emblem series, developed by Intelligent Systems and owned by Nintendo.  This is my interpretation of the male version of the character.  There is also a female version of the character in the game.  My co-worker told me when I was making Robin that he was the continuing of a series of dolls inspired by the characters from the Fire Emblem game series for her son.

MATERIALS:
Worsted weight yarn:  Buff, light gray, navy blue, white, yellow, charcoal, purple, and black.
E Crochet hook
Polyester fiberfill
Tapestry needle
Wooden Skewer
Silver paint
Paintbrush
Craft glue
Yellow and white craft foam

ARMS (MAKE 2):
Rd 1: With buff, 6 sc in magic ring. (6)
Rd 2: (sc in next 2 sc, 2 sc in next sc) around.  (8)
Rds 3-4: sc in each sc around.  (8)
Rd 5: Ch 3, sc in second ch from hook, sc in next ch, sc in next 8 sc.  (10)
Rd 6: sc in free loops of ch-3, sc in next ch, sc in next 10 sc.  (12)
Rd 7: skip next 4 sc, sc in next 8 sc.  (8)
Rd 8: (sc in next 2 sc, sc2tog) around.  (6)
Rd 9: (sc in next 2 sc, 2 sc in next sc) around.  (8)
Rds 10-17: sc in each sc around.  (8)
Rd 18: sc in each sc around.  (8)
BEGIN STUFFING THE ARMS FIRMLY.  CONTINUE STUFFING AS YOU GO.
Rd 19: (sc in next 3 sc, 2 sc in next sc) around.  (10)
Rds 20-23: sc in each sc around.  (10)
Finish off.

LEGS (MAKE 2):
Rd 1: With light gray, 8 sc in a magic ring.  (8)
Rds 2-4: sc in each sc around.  (8)
NOW WORKING IN ROWS.
Rw 5: sc in next 4 sc leaving remaining sc of Rd 4 unworked.  (4)
Rw 6: Ch 1, turn; sc in next 4 sc.  (4)
Rw 7: Ch 1, turn; sc2tog twice.  (2)
NOW WORKING IN RDS AGAIN.
Rd 8: Ch 1, sc in the side of Rows 5-7, slip st in unworked sc on Rd 4, sc in the side of Rows 5-7, sc in top of sc of Row 7.  (12)
Rd 9: (sc in next 4 sc, sc2tog) around.  (10)
Rd 10: sc2tog, sc in next 6 sc, sc2tog.  (8)
BEGIN STUFFING THE LEGS FIRMLY.  CONTINUE STUFFING AS YOU GO.
Rds 11-13: sc in each sc around.  (8)
Rd 14: 2 sc in next sc, sc in next 7 sc.  (9)
Rd 15: sc in each sc around.  (9)
Rd 16: sc in next sc, 2 sc in next sc, sc in next 7 sc.  (10)
Rds 17-20: sc in each sc around.  (10)
Rd 21: sc in next sc, sc2tog, sc in next 7 sc.  (9)
Rds 22-23: sc in each sc around.  (9)
Rd 24: sc in next sc, 2 sc in next sc, sc in next 7 sc.  (10)
Rd 25: sc in each sc around.  (10)
Rd 26: 2 sc in next sc, sc in next 9 sc.  (11)
Rd 27: sc in each sc around.  (11)
Rd 28: sc in next 2 sc, 2 sc in next sc, sc in next 8 sc.  (12)
Rds 29-31: sc in each sc around.  (12)
Finish off.

FRONT SKIRT:
Rw 1: With navy blue, ch 12, sc in second ch from hook and in each ch across.  (11)
Rws 2-10: Ch 1, turn; sc in each sc across.  (11)
Rw 11: Ch 1, turn; sc2tog, sc in next 7 sc, sc2tog.  (9)
Rw 12: Ch 1, turn; sc2tog, sc in next 5 sc, sc2tog.  (7)
Finish off.  Weave in ends.
EDGING:
Rd 1: Attach navy blue at top corner, ch 1, working outer curved edge, sc in next 9 rows, 2 sc in next row, sc in next row, 2 sc in first sc of Rw 12, sc in next 5 sc, 2 sc in last sc of Rw 12, sc in side of next row, 2 sc in next row, sc in next 9 rows.  (33)  Change to yellow.
Rd 2: Ch 1, turn; sc in next 6 sc, FPSC in next 2 sc, sc in next sc, FPSC in next 2 sc, sc in next sc, FPSC in next 2 sc, sc in next 2 sc, FPSC in next 2 sc, sc in next sc, FPSC in next 2 sc, sc in next sc, FPSC in next 2 sc, sc in next 6 sc.
Finish off.  Weave in ends.  With yellow, surface slip st along base of Rd 1.  Finish off.  Weave in ends.

SIDE SKIRTS (MAKE 2):
Rw 1: With navy blue, ch 7, sc in second ch from hook and in each ch across.  (6)
Rws 2-9: Ch 1, turn; sc in each sc across.  (6)
Rw 10: Ch 1, turn; sc2tog, sc in next 2 sc, sc2tog.  (4)
Finish off.  Weave in ends.
EDGING:
Rd 1: Attach navy blue at top corner, ch 1, working outer curved edge, sc in next 7 rows, 2 sc in next row, 2 sc in first sc of Rw 10, sc in next 2 sc, 2 sc in last sc of Rw 10, 2 sc in next row, sc in next 7 rows.  (24)  Change to yellow.
Rd 2: Ch 1, turn; sc in each sc around.  (24)
Finish off.  Weave in ends.  With yellow, surface slip st along base of Rd 1.  Finish off.  Weave in ends.

BODY
Rd 1: With black, ch 2, 4 sc in second ch from hook.  (4)
Rd 2: sc in next 2 sc, sc in next 12 sc on RIGHT LEG, sc in next 2 sc on BODY, sc in next 12 sc on LEFT LEG.  (28)
Rds 3-10: sc in each sc around.  (28)
THE NEXT RD MAYBE EASIER EXPLAINED BY USING LETTERS TO INDICATE WHICH PIECES THAT EACH SC AROUND WILL BE WORKING THROUGH – B = BODY, S = SIDE SKIRT, F = FRONT SKIRT.
Rd 11: sc in next 3 sc (B, S), sc in next sc (B), sc in next 7 sc (B, S), sc in next 5 sc (B, S, F), sc in next 5 sc (B, F), sc in next 5 sc (B, S, F), sc in next 2 sc (B, S), slip st in first sc.  (28)
NOW WORKING IN JOINED AND TURNED RDS
Rd 12: Ch 1, turn; sc in next 11 sc, sc2tog, sc in next 8 sc, sc2tog, sc in next 5 sc, join with slip st in first sc.  (26)
Rd 13: Ch 1, turn; sc in next 21 sc, sc2tog, sc in next 3 sc, join.  (25)
Rds 14-18: Ch 1, turn; sc in each sc around, join.  (25)
Rd 19: Ch 1, turn; sc in next 4 sc, 2 sc in next sc, sc in next 8 sc, 2 sc in next sc, sc in next 7 sc, 2 sc in next sc, sc in next 3 sc, join.  (28)
Rd 20: Ch 1, turn; sc in next 12 sc, 2 sc in next sc, sc in next 10 sc, 2 sc in next sc, sc in next 4 sc, join.  (30)
Rd 21: Ch 1, turn; sc in each sc around, join.  (30)
Rd 22: Ch 1, turn; sc in next 10 sc, holding marked st on ARM together with next sc on BODY with right side toughing and working through both thicknesses, sc in next 2 sc, sc in next 14 on BODY, holding marked st on ARM together with next sc on BODY with right side toughing and working through both thicknesses, sc in next 2 sc, sc in next 2 sc, join.
Rd 23: Ch 1, turn; sc in next 2 sc, sc in next 8 sc on ARM, sc in next 14 sc on BODY, sc in next 8 sc on ARM, sc in next 10 sc on BODY, join.  (40)
Rd 24: Ch 1, turn; sc in next 23 sc, change to buff, sc in next 2 sc, change to light gray, sc in next 15 sc, join.  (40)
Rd 25: Ch 1, turn; sc in next 2 sc, (sc2tog) 4 times, sc in next 5 sc, change to buff, sc in next 2 sc, change to light gray, sc in next 5 sc, (sc2tog) 4 times, sc in next 10 sc, join.  (32)
Rd 26: Ch 1, turn; sc in next 8 sc, (sc2tog) 4 times, sc in next 2 sc, change to buff, sc in next 4 sc, change to light gray, sc in next 2 sc, (sc2tog) 4 times, join.  (24)
Rd 27: Ch 1, turn; (sc2tog) 3 times, change to buff, sc in next 4 sc, change to light gray, (sc2tog) 4 times, sc in next 4 sc, sc2tog, join.  (16)
Rd 28: Ch 1, turn; sc2tog, sc in next 2 sc, (sc2tog) 3 times, sc in next 3 sc, change to buff, sc in next 4 sc, change to light gray, (sc2tog) twice, slip st in first sc change to buff.  (12)
Rd 29: Working in back loops only, ch 1, turn; (sc in next sc, sc2tog) around.  (8)
WORKING IN UNJOINED CONTINUOUS ROUNDS.
Rd 30: sc in each sc around.  (8)  Finish off.
BEGIN STUFFING THE DOLL FIRMLY.  CONTINUE STUFFING AS YOU GO.
Rd 31: Attach buff in center back sc, ch 1, sc in next  sc, 2 sc in next 4 sc, sc in next 2 sc.  (12)
Rd 32: sc in next 4 sc, 2 sc in next 4 sc, sc in next 4 sc.  (16)
Rd 33: (sc in next 3 sc, 2 sc in next sc) around.  (20)
Rds 34-41:       sc in each sc around.  (20)
Rd 42: (sc in next 2 sc, sc2tog) around.  (15)
Rd 43: (sc in next sc, sc2tog) around.  (10)
Rd 44: sc2tog around.  (5)
Finish off with a long tail.  Add more stuffing to firmly achieve desired shape.  Weave tail through sc of Rd 44, pull tightly, and secure.  Weave in ends

EARS (MAKE 2)
Rw 1:   Ch 4, sc in second ch from hook and in next ch.  (2)
Finish off.  Sew to HEAD.

NOSE
Rw 1:   Ch 4, sc in second ch from hook and in next ch.  (2)
Rw 2:   Ch 1, turn; sc2tog.  (1)
Finish off.  Sew to FACE bunching Row 1 together.

EYES, EYEBROWS, AND MOUTH:
Embroider EYES, EYEBROWS, and MOUTH on face of DOLL.

HAIR:
Fringe white yarn as hair on DOLL.

BOOTS (MAKE 2):
Rd 1: With charcoal, ch 6, 2 sc in second ch from hook, sc in next 3 ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 4 ch.  (12)
Rd 2: (3 sc in next sc, sc in next 5 sc) around.  (16)
Rds 3-5: sc in each sc around.  (16)
Rd 6: slip st in next 3 sc, ch 1, sc in same sc as last slip st, sc in next 3 sc, (sc2tog) 4 time, sc in next 4 sc.  (12)
NOW WORKING IN ROWS.
Rws 7-10: Ch 1, turn; sc in next 12 sc.  (12)
Rw 11: Ch 1, turn; 2 sc in next sc, sc in next 10 sc, 2 sc in next sc.  (14)
Rws 12-16: Ch 1, turn; sc in each sc across.  (14)
Rws 17-18: Ch 1, turn; sc in each sc across.  (14)
Finish off leaving a long tail.  Place BOOT on foot and sew back seam closed.

BOOTS TOP (MAKE 2):
Rw 1: With charcoal, ch 13, sc in second ch from hook and in each ch across.  (12)
Rws 2-3: Ch 1, turn; sc in each sc across.  (12)
Rw 4: Ch 1, turn; sc3tog, sc in next 6 sc, sc3tog.  (8)
Rw 5: Ch 1, turn; sc3tog, sc in next 2 sc, sc3tog.  (4)
Finish off.  Sew BOOT TOP to BOOT.

YELLOW BOOT ACSENTS:
With yellow, backstitch yellow strip along Rd 3 and Rd 7.  Embroider French Knots at each bottom corner of BOOT TOPS.
WAIST GUARD:
Rd 1: With charcoal, 6 sc in magic ring.  (6)
Rd 2: 2 sc in each sc around.  (12)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (18)
Rd 4: (sc in next 2 sc, 2 sc in next sc) around.  (24)
Finish off leaving a long tail.  Sew WAIST GUARD just above FRONT SKIRT.  Weave in ends.

BELT #1:
Rw 1: With charcoal, ch 32, sc in second ch from hook and in each sc across.  (31)
Finish off leaving a long tail.
BELT BUCKLE:
Rd 1: Working around st #16 of BELT #1, attach yellow with slip st, sc in next 2 sc, sc twice while crossing BELT to other side of BELT, sc in same ch as last crossing sc, sc in next ch, slip st in next ch.
Finish off.  Weave in ends.

BELT #2:
Rw 1: With charcoal, ch 34, sc in second ch from hook and in each sc across.  (33)
Finish off leaving a long tail.
BELT BUCKLE:
Rd 1: Working around st #17 of BELT #1, attach yellow with slip st, sc in next 2 sc, sc twice while crossing BELT to other side of BELT, sc in same ch as last crossing sc, sc in next ch, slip st in next ch.
Finish off.  Weave in ends.

ARMGUARDS (MAKE 2):
Rw 1: With charcoal, ch 6, sc in second ch from hook and in each ch across.  (5)
Rws 2-4: Ch 1, turn; sc in each sc across.  (5)
Rw 5: Ch 1, turn; 2 sc in next sc, sc in next 4 sc.  (6)
Rw 6: Ch 1, turn; sc in next 5 sc, 2 sc in next sc.  (7)
Rw 7: Ch 1, turn; 2 sc in next sc, sc in next 6 sc.  (8)
Rw 8: Ch 1, turn; sc in next 6 sc, sc2tog.  (7)
Rw 9: Ch 1, turn; sc2tog, sc in next 5 sc.  (6)
Rw 10: Ch 1, turn; sc in next 4 sc, sc2tog.  (5)
Rw 11-13: Ch 1, turn; sc in each sc across.  (5)
Finish off leaving a long tail.  Wrap ARMGUARD around ARM.  Sew Rw 1 and Rw 13 together.  Weave in ends.

JACKET TOP:
Rw 1: With navy blue, ch 35, sc in second ch from hook and in each ch across.  (34)
Rws 2-16: Ch 1, turn; sc in each sc across.  (34)
Rw 17: Ch 1, turn; sc in next 5 sc, slip st in next 5 sc, sc in next 14 sc, slip st in next 5 sc, sc in next 5 sc.
Rw 18: Ch 1, turn; sc in next 5 sc, ch 5, skip next 5 slip sts, dc in next 14 sc, ch 5, skip next 5 slip sts, sc in next 5 sc.
Rw 19: Ch 1, turn; sc in each sc and ch across.  (34)
Rw 20: Ch 1, turn; sc in each sc across.  (34)
Rw 21: Ch 1, turn; sc2tog, sc in next 9 sc, sc2tog, sc in next 8 sc, sc2tog, sc in next 9 sc, sc2tog.  (30)
Rw 22: Ch 1, turn; sc2tog, sc in next 7 sc, sc2tog, sc in next 8 sc, sc2tog, sc in next 7 sc, sc2tog.  (26)
Rws 23-38: Ch 2, turn; sc in each sc across.  (26)
Finish off leaving a long tail.  Fold Rw 38 in half and whipstitch top of hood closed.  Weave in ends.

JACKET BOTTOM:
Rw 1: Working in free loops of foundation ch of JACKET TOP, attach navy blue, ch 1, sc in each sc across.  (34)
Rws 2-8: Ch 1, turn; sc in each sc across.  (34)
Rw 9: Ch 1, turn; sc in next 3 sc, (2 sc in next sc, sc in next 6 sc) 3 times, 2 sc in next sc, sc in next 5 sc, 2 sc in next sc, sc in next 3 sc.  (39)
Rw 10: Ch 1, turn; sc in each sc across.  (39)
Rw 11: Ch 1, turn; sc in next 9 sc, (2 sc in next sc, sc in next 9 sc) 3 times.  (42)
Rw 12: Ch 1, turn; sc in each sc across.  (42)
Rws 13-14: Ch 1, turn; sc in next 3 sc, (change to yellow, sc in next sc, change to navy blue, sc in next 6 sc) 5 times, change to yellow, sc in next sc, change to navy blue, sc in next 3 sc.  (42)
Rws 15-16: Ch 1, turn; sc in next 2 sc, (change to yellow, sc in next 3 sc, change to navy blue, sc in next 4 sc) 5 times, change to yellow, sc in next 3 sc, change to navy blue, sc in next 2 sc.  (42)
Finish off.  Weave in ends.

JACKET EDGING:
Rd 1: with right side facing, attach yellow in middle of bottom of the JACKET, ch 1, sc in each sc across, 3 sc in corner sc, working up side of JACKET,  sc in next 15 sc, follow graph below for surface chains of each button accents with 2 sc in side of JACKET between each button accents, continue to sc along side of JACKET around hood to opposite of previous button accents, repeat button accents pattern, continue to sc along side of JACKET, 3 sc in corner, sc in along bottom of JACKET, slip st in first sc.  Finish off.  Weave in ends.

SLEEVES (MAKE 2):
Rd 1: Attach navy blue in center slip st of underarm, ch 1, sc in same as attachment, sc in next 2 sc, evenly place 3 sc in side of armhole, sc in each free loops of ch-5, 2 sc in side of armhole, sc in next 2 sc of underarm, slip st in first sc.  (15)
Rds 2-14: Ch 1, sc in each sc around, slip st in first sc.  (15)  Change to yellow after Rd 14.
Rd 15: Working in back loops only, ch 1, sc in each sc around, slip st in first sc.  (15)
Rds 16-18: Ch 1, sc in each sc around, slip st in first sc.  (15)
Finish off.  Weave in ends.  Fold back the yellow rounds.

JACKET EMBROIDERY:
Use pictures below and purple yarn to embroider accents on JACKET.

BOOK:
COVER:
Cut a 2 1/2 inch by 5 inch piece of yellow craft foam.
PAGES:
Cut a 2 1/4 inch by 4 3/4  inch piece of white craft foam.  Cut to COVER.

SWORD HILT:
Rw 1: With yellow, ch 11, sc in second ch from hook and in each ch across.  (10)
Rw 2: Ch 1, turn; sc in next 7 sc.  (7)
Rw 3: Ch 4, sc in second ch from hook, sc in next 2 ch, sc in next 7 sc.  (10)
Rw 4: Ch 1, turn; sc in next 7 sc, ch 10, slip st in first sc.  (7)
Finish off leaving a long tail.  Sew Row 1 and Row 4 of SWORD HILT together.  Sew bottom of SWORD HILT closed.  Cut wooden skewer to desired.  Glue SWORD HILT to wooden skewer.  Cut two piece of white craft foam in the shape to match the sword below.  Glue to wooden skewer.  Paint blade of SWORD silver.

ROBIN and FIRE EMBLEM are copyright Nintendo and their respective creators.

This crochet pattern is an original pattern and is © by Christjan Bee (October 2016).  Please do not claim this pattern as your own.  If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site.  You may print and keep a copy for your own personal use but you may not sell or distribute it, or sell items made from this pattern.

LOBSTER

This pattern was requested by my daughter when she ask one similar on the Internet.  I made it with light blue yarn because that was the color that my daughter said the one she saw on the Internet.  It can be made in any color.

MATERIALS:
Worsted weight yarn: Light blue
G crochet hook
Polyester Fiberfil
Tapestry needle
10 mm safety eyes

BODY:
Rd 1: With light blue, ch 2, 3 sc in second ch from hook working around ch.  (3)
Rd 2: 2 sc in each sc around.  (6)
Rd 3: (sc in next sc, 2 sc in next sc) around.  (9)
Rd 4 (sc in next 2 sc, 2 sc in next sc) around.  (12)
Rd 5: (sc in next 3 sc, 2 sc in next sc) around.  (15)
Rd 6: (sc in next 4 sc, 2 sc in next sc) around.  (18)
Rds 7-8: sc in each sc around.  (18)
Rd 9: (sc in next 5 sc, 2 sc in next sc) around.  (21)
Rd 10: (sc in next 6 sc, 2 sc in next sc) around.  (24)
Rds 11-18: sc in each sc around.  (24)
INSERT SAFETY EYES BETWEEN RD 6 AN RD 7 WITH 5 SC BETWEEN EYES.
Rd 19: (sc in next 6 sc, sc2tog) around.  (21)
Rd 20: (sc in next 5 sc, sc2tog) around.  (18)
Rds 21-24: sc in each sc around.  (18)
Rd 25: (sc in next 4 sc, sc2tog) around.  (15)
Rd 26: (sc in next 3 sc, sc2tog) around.  (12)
Rds 27-30: sc in each sc around.  (12)
Rd 31: (sc in next sc, 2 sc in next sc) around.  (18)
Rd 32: (sc in next 2 sc, 2 sc in next sc) around.  (24)
STUFF BODY FIRMLY.
Rd 33: slip in next 4 sc, ch 1, turn; flatten tail, working through both thicknesses, sc in each sc across.  (12)
Rw 34: [(Slip st, ch 2, dc) in next sc, dc in next 2 sc, (dc, ch 2, slip st) in next dc] 3 times.  (3 scallops)
Finish off.  Weave in ends.

LEGS (MAKE 3):
Rw 1: With light blue, ch 22, sc in second ch from hook and in each ch across.  (21)
Finish off leaving a long tail.  Pull LEGS through stitches on underside of lobster body in desired position.  Weave in ends.

CLAW ARM:
Rw 1: With light blue, ch 50, sc in second ch from hook and in each ch across.  (49)
Finish off leaving a long tail.  Pull CLAW ARM through stitches on underside of lobster body in desired position.  Weave in ends.

CLAWS (MAKE 2):
Rw 1: With light blue and leaving long tail before the chain, ch 2, 2 sc in second ch from hook.  (2)
Rw 2: Ch 1, turn; 2 sc in each sc across.  (4)
Rws 3-10: Ch 1, turn; sc in each sc across to last sc, 2 sc in last sc.  (12 in Rw 10)
Finish off leaving a long tail.  Fold CLAW in half and tack with tail.  Slide CLAW onto CLAW ARM.  Use tail to tack CLAW to CLAW ARM in desired position.  Use second tail (starting at tip of CLAW) to sew inside edge of folded CLAW closed.  Repeat for second CLAW.  Weave in ends.

This crochet pattern is an original pattern and is © by Christjan Bee (September 2016).  Please do not claim this pattern as your own.  If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site.  You may print and keep a copy for your own personal use but you may not sell or distribute it, or sell items made from this pattern.

MARTH (FIRE EMBLEM)

This is an adaptation of my seamless doll in a more masculine form.  This doll was a request from a co-worker for her son.  Marth is a fictional character from the Fire Emblem series, developed by Intelligent Systems and owned by Nintendo.  This is my interpretation of the character.  My co-worker told me when I was making Marth that he was the beginning of a series of dolls inspired by the characters from the Fire Emblem game series for her son.

MATERIALS:
Worsted weight yarn:  Blue, white, charcoal, yellow, red, coffee brown, and black.
B and E Crochet hook
Silver Size 10 crochet cotton
Polyester fiberfill
Tapestry needle
Wooden Skewer
Silver paint
Paintbrush
Craft glue
Yellow craft foam

ARMS (MAKE 2):
Rd 1: With buff, 6 sc in magic ring. (6)
Rd 2: (sc in next 2 sc, 2 sc in next sc) around.  (8)  Change to charcoal.
Rds 3-4: sc in each sc around.  (8)
Rd 5: Ch 1, change to buff, ch 2, sc in second ch from hook, change to charcoal, sc in next ch, sc in next 8 sc.  (10)
Rd 6: sc in free loops of ch-3, sc in next ch, change to buff, sc in next ch and next sc, change to charcoal, sc in next 9 sc.  (12)
Rd 7: skip next 4 sc, sc in next 8 sc.  (8)
Rd 8: (sc in next 2 sc, sc2tog) around.  (6)
Rd 9: (sc in next 2 sc, 2 sc in next sc) around.  (8)
Rds 10-17: sc in each sc around.  (8)  Change to buff.
Rd 18: sc in each sc around.  (8)
BEGIN STUFFING THE ARMS FIRMLY.  CONTINUE STUFFING AS YOU GO.
Rd 19: (sc in next 3 sc, 2 sc in next sc) around.  (10)
Rds 20-22: sc in each sc around.  (10)
Finish off.

SHIRT SLEEVE (MAKE 2):
Rd 1: With white, ch 15, slip st in first ch to form ring, ch 1, sc in each ch around, slip st in first sc.  (15)
Rd 2: Holding ARM inside of SHIRT SLEEVE and working both thicknesses, sc in each sc around.  (NOTE:  every other sc will be worked using 2 sc on SHIRT SLEEVE and 1 sc on ARM.  (15)
Finish off.

LEGS (MAKE 2):
Rd 1: With black, 8 sc in a magic ring.  (8)
Rds 2-4: sc in each sc around.  (8)
NOW WORKING IN ROWS.
Rw 5: sc in next 4 sc leaving remaining sc of Rd 4 unworked.  (4)
Rw 6: Ch 1, turn; sc in next 4 sc.  (4)
Rw 7: Ch 1, turn; sc2tog twice.  (2)
NOW WORKING IN RDS AGAIN.
Rd 8: Ch 1, sc in the side of Rows 5-7, slip st in unworked sc on Rd 4, sc in the side of Rows 5-7, sc in top of sc of Row 7.  (12)
Rd 9: (sc in next 4 sc, sc2tog) around.  (10)
Rd 10: sc2tog, sc in next 6 sc, sc2tog.  (8)
BEGIN STUFFING THE LEGS FIRMLY.  CONTINUE STUFFING AS YOU GO.
Rds 11-13: sc in each sc around.  (8)
Rd 14: 2 sc in next sc, sc in next 7 sc.  (9)
Rd 15: sc in each sc around.  (9)
Rd 16: sc in next sc, 2 sc in next sc, sc in next 7 sc.  (10)
Rds 17-20: sc in each sc around.  (10)
Rd 21: sc in next sc, sc2tog, sc in next 7 sc.  (9)
Rds 22-23: sc in each sc around.  (9)
Rd 24: sc in next sc, 2 sc in next sc, sc in next 7 sc.  (10)
Rd 25: sc in each sc around.  (10)
Rd 26: 2 sc in next sc, sc in next 9 sc.  (11)
Rd 27: sc in each sc around.  (11)
Rd 28: sc in next 2 sc, 2 sc in next sc, sc in next 8 sc.  (12)
Rds 29-31: sc in each sc around.  (12)
Finish off.

BODY
Rd 1: With black, ch 2, 4 sc in second ch from hook.  (4)
Rd 2: sc in next 2 sc, sc in next 12 sc on RIGHT LEG, sc in next 2 sc on BODY, sc in next 12 sc on LEFT LEG.  (28)
Rds 3-11: sc in each sc around.  (28)
Rd 12: Slip st in next sc changing to blue, ch 1, sc in same sc as slip st, sc in next 10 sc, sc2tog, sc in next 4 sc, change to yellow, sc in next 2 sc, change to blue, sc in next 6 sc, sc2tog, sc in next sc, slip st in first sc to join.  (26)
Rd 13: Ch 1, turn; sc in next 8 sc, change to yellow, sc in next 2 sc, change to blue, sc in next 10 sc, sc2tog, sc in next 4 sc, join.  (25)
Rd 14: Ch 1, turn; sc in next 15 sc, change to yellow, sc in next 2 sc, change to blue, sc in next 8 sc, join.  (25)
Rd 15: Ch 1, turn; sc in next 8 sc, change to yellow, sc in next 2 sc, change to blue, sc in next 15 sc, join.  (25)
Rd 16: Ch 1, turn; sc in next 15 sc, change to yellow, sc in next 2 sc, change to blue, sc in next 8 sc, join.  (25)
Rd 17: Ch 1, turn; sc in next 8 sc, change to yellow, sc in next 2 sc, change to blue, sc in next 15 sc, join.  (25)
Rd 18: Ch 1, turn; sc in next 15 sc, change to yellow, sc in next 2 sc, change to blue, sc in next 8 sc, join.  (25)
Rd 19: Ch 1, turn; sc in next 4 sc, 2 sc in next sc, sc in next 3 sc, change to yellow, sc in next 2 sc, change to blue, sc in next 3 sc, 2 sc in next sc, sc in next 7 sc, 2 sc in next sc, sc in next 3 sc, join.  (28)
Rd 20: Ch 1, turn; sc in next 12 sc, 2 sc in next sc, sc in next 4 sc, change to yellow, sc in next 2 sc, change to blue, sc in next 4 sc, 2 sc in next sc, sc in next 4 sc, join.  (30)
Rd 21: Ch 1, turn; sc in next 10 sc, change to yellow, sc in next 2 sc, change to blue, sc in next 18 sc, join.  (30)
Rd 22: Ch 1, turn; sc in next 10 sc, holding marked st on ARM together with next sc on BODY with right side toughing and working through both thicknesses, sc in next sc, work 1 sc in next sc on BODY together with next 2 sc on ARM, sc in next 6 sc on BODY, change to yellow, sc in next 2 sc, change to blue, sc in next 6 sc, holding marked st on ARM together with next sc on BODY with right side toughing and working through both thicknesses, sc in next sc, work 1 sc in next sc on BODY together with next 2 sc on ARM, sc in next 2 sc, join.
Rd 23: Ch 1, turn; sc in next 2 sc, working on ARM, (sc in next sc, sc2tog) 4 times, sc in next sc on BODY, sc2tog, sc in next 3 sc, change to yellow, sc in next 2 sc, change to blue, sc in next 3 sc, sc2tog, sc in next sc, working on ARM, (sc in next sc, sc2tog) 4 times, sc in next 10 on BODY, join.  (40)
Rd 24: Ch 1, turn; sc in next 23 sc, change to yellow, sc in next 2 sc, change to blue, sc in next 15 sc, join.  (40)
Rd 25: Ch 1, turn; sc in next 2 sc, (sc2tog) 4 times, sc in next 5 sc, change to yellow, sc in next 2 sc, change to blue, sc in next 5 sc, (sc2tog) 4 times, sc in next 10 sc, join.  (32)
Rd 26: Ch 1, turn; sc in next 8 sc, (sc2tog) 4 times, sc in next 3 sc, change to yellow, sc in next 2 sc, change to blue, sc in next 3 sc, (sc2tog) 4 times, join.  (24)
Rd 27: Ch 1, turn; (sc2tog) 3 times, sc in next sc, change to yellow, sc in next 2 sc, change to blue, sc in next sc, (sc2tog) 4 times, sc in next 4 sc, sc2tog, join.  (16)  Finish off.
Rd 28: Working in back loops only, attach buff in center back sc, ch 1, (sc in next 2 sc, sc2tog) around.  (12)
Rd 29: (sc in next sc, sc2tog) around.  (8)
Rd 30: sc in each sc around.  (8)
BEGIN STUFFING THE DOLL FIRMLY.  CONTINUE STUFFING AS YOU GO.
Rd 31: sc in next 2 sc, 2 sc in next 4 sc, sc in next 2 sc.  (12)
Rd 32: sc in next 4 sc, 2 sc in next 4 sc, sc in next 4 sc.  (16)
Rd 33: (sc in next 3 sc, 2 sc in next sc) around.  (20)
Rds 34-41:       sc in each sc around.  (20)
Rd 42: (sc in next 2 sc, sc2tog) around.  (15)
Rd 43: (sc in next sc, sc2tog) around.  (10)
Rd 44: sc2tog around.  (5)
Finish off with a long tail.  Add more stuffing to firmly achieve desired shape.  Weave tail through sc of Rd 44, pull tightly, and secure.  Weave in ends

COLLAR:
I COMPLETED THE ROUNDS OF THE COLLAR ONCE I STUFFED BODY BEFORE FINISHING THE HEAD ROUNDS.
Rd 28: Working in front loops only, starting in first blue, attach blue, ch 1, sc in next 10 sc.  Finish off.
Rd 29: Attach yellow in front loops of first yellow sc of Rd 27, sc together same sc as attachment and first sc of Rd 28, sc again in first sc of Rd 28, sc in next 9 sc, sc together last sc of Rd 28 and next yellow sc of Rd 27.  Finish off.  Weave in ends.

EARS (MAKE 2)
Rw 1:   Ch 4, sc in second ch from hook and in next ch.  (2)
Finish off.  Sew to HEAD.

NOSE
Rw 1:   Ch 4, sc in second ch from hook and in next ch.  (2)
Rw 2:   Ch 1, turn; sc2tog.  (1)
Finish off.  Sew to FACE bunching Row 1 together.

EYES, EYEBROWS, AND MOUTH:
Embroider EYES, EYEBROWS, and MOUTH on face of DOLL.

HAIR:
Fringe blue yarn as hair on DOLL.

HEADBAND:
With yellow, ch 25.  Finish off.  Wrap HEADBAND around HEAD through HAIR, secure and hide under HAIR.

OUTFIT LOWER FRONT (MAKE 2):
Rw 1: With blue, ch 7, sc in second ch from hook and in each ch across.  (6)
Rws 2-14: Ch 1, turn; sc in each sc across.  (6)
Finish off.  Weave in ends.
OUTER EDGE:
With yellow, sc evenly along outer edge of each piece.
INNER EDGE:
With yellow, sc evenly along inner edge of first OUTFIT LOWER FRONT, sc evenly along inner edge of second OUTFIT LOWER FRONT.

OUTFIT LOWER BACK:
Rw 1: With blue, ch 14, sc in second ch from hook and in each ch across.  (13)
Rws 2-14: Ch 1, turn; sc in each sc across.  (13)
Finish off.  Weave in ends.
EDGING:
With yellow, sc evenly along each side of OUTFIT LOWER BACK.  Leave top and bottom edge unworked.

BELT:
Rw 1: With coffee brown, ch 32, holding ch and top of OUTFIT LOWER FRONT together and working through both thicknesses, sc in second ch from hook and in next 15 ch, holding ch and top of OUTFIT LOWER BACK together and working through both thicknesses, sc in next 15 ch.  (31)
Rw 2: Ch 1, turn; sc in each sc across.  (31)
Finish off leaving a long tail.

BELT BUCKLE:
Rd 1: With silver size 10 cotton, 8 sc in magic ring, slip st in first sc.  (8)
Finish off leaving a long tail.  Sew BELT BUCKLE to BELT.  Wrap BELT around waist of MARTH and sew edge together.  Finish off.  Weave in ends.

BREASTPLATE:
Rw 1: With charcoal, Ch 11, 2 sc in second ch from hook, (sc in next 2 ch, 2 sc in next ch) 3 times.  (14)
Rw 2: Ch 1, turn: 2 sc in next sc, sc in next 12 sc, 2 sc in next sc.  (16)
Rw 3: Ch 1, turn; sc2tog, sc in next 12 sc, sc2tog.  (14)
Rw 4: Ch 1, turn; sc2tog, sc in next 10 sc, sc2tog.  (12)
Rws 5-6: Ch 1, turn; sc in each sc across.  (12)
Finish off.  Weave in ends.
EDGING:
Starting at top corner, attach yellow, ch 1, sc in next 4 rows, 3 sc in next st, sc in next st, 2 sc in next st, sc in next 8 sts, 2 sc in next st, sc in next st, 3 sc in next st, sc in next 4 sts.  Finish off.  Weave in ends.
STRAP:
With coffee brown, attach in 7th yellow sc of EDGING of BREASTPLATE, ch 22, finish off leaving a long tail.  Place BREASTPLATE on MARTH, wrap STRAP around MARTH, sew STRAP to corresponding sc on other side of BREASTPLATE.  Finish off.  Weave in ends.

SHOULDER GUARDS (MAKE 2):
Rw 1: With charcoal, ch 6, sc in second ch from hook and in each sc across.  (5)
Rws 2-5: Ch 1, turn; sc in each sc across.  (5)
Finish off.  Weave in ends.
EDGING
With yellow, sc evenly around outside edge of SHOULDER GUARD with 2 sc in each corner, slip st in first sc.  Finish off.  Weave in ends.
STRAP:
Attach brown on one side, ch 10, finish off leaving a long tail.  Place SHOULDER GUARD  on MARTH, wrap STRAP around shoulder, attach STRAP to other side of SHOULDER GUARD, secure, weave in ends.

CAPE:
Rw 1: With blue, ch 33, sc in second ch from hook, sc in next 2 sc, 2 sc in next sc, (sc in next 3 sc, 2 sc in next sc) 7 times.  (40)
Rw 2: Ch 1, turn; (sc in next 4 sc, 2 sc in next sc) across.  (48)
Rw 3: Ch 1, turn; (sc in next 5 sc, 2 sc in next sc) across.  (56)
Finish off leaving a long tail.
Rw 4: Skip next 14 sc, attach blue in next sc, ch 2, dc in same sc as attachment, dc in next 13 sc.  (14)
Rws 5-14: Ch 2, turn; 2 dc in next dc, dc in each dc across to last dc, 2 dc in last dc.  (34 in Row 14)
Rw 15: Ch 2, turn; dc in each dc across.  (34)
Rw 16: Ch 2, turn; 2 dc in next dc, dc in each dc across to last dc, 2 dc in last dc.  (36)
Rw 17: Ch 2, turn; dc in each dc across.  (34)
Rw 18: Ch 2, turn; 2 dc in next dc, dc in each dc across to last dc, 2 dc in last dc.  (38)
Rw 19: Ch 2, turn; dc in each dc across.  (34)
Rw 20: Ch 2, turn; 2 dc in next dc, dc in each dc across to last dc, 2 dc in last dc.  (40)
Finish off.  Weave in ends.  Place around neck, front of CAPE should overlap BREASTPLATE and SHOULDER GUARDS.  Sew in place.  Sew together Rows 1 through 3.  Finish off and weave in ends.

CAPE JEWEL:
Rd 1: With red, 6 sc in magic ring, slip st in first sc changing to yellow.  (6)
Rd 2: Ch 1, 2 sc in each sc around, join.  (12)
Finish off leaving a long tail.  Sew CAPE JEWEL to CAPE.

BOOTS (MAKE 2):
Rd 1: With coffee brown, ch 6, 2 sc in second ch from hook, sc in next 3 ch, 3 sc in next ch working around ch, working in free loops of foundation ch, sc in next 4 ch.  (12)
Rd 2: (3 sc in next sc, sc in next 5 sc) around.  (16)
Rds 3-5: sc in each sc around.  (16)
Rd 6: slip st in next 3 sc, ch 1, sc in same sc as last slip st, sc in next 3 sc, (sc2tog) 4 time, sc in next 4 sc.  (12)
NOW WORKING IN ROWS.
Rws 7-10: Ch 1, turn; sc in next 12 sc.  (12)
Rw 11: Ch 1, turn; 2 sc in next sc, sc in next 10 sc, 2 sc in next sc.  (14)
Rws 12-16: Ch 1, turn; sc in each sc across.  (14)
Rw 17: Ch 1, turn; sc in next 6 sc, ch 1, dc in next 2 sc, ch 1, sc in next 6 sc.  (14)
Rw 18: Ch 1, turn; sc in each sc across.  (14)
Finish off leaving a long tail.  Place BOOT on foot and sew back seam closed.

BOOT CUFFS (MAKE 2):
Rw 1: With white, ch 15, sc in second ch from hook and in each ch across.  (14)
Rw 2: Ch 1, turn; sc in each sc across.  (14)
Finish off leaving a long tail.  Sew BOOT CUFF to top of BOOT.

SWORD SCABBARD:
Rw 1: With coffee brown, ch 18, sc in second ch from hook and in each ch across.  (17)
Rws 2-4: Ch 1, turn; sc in each sc across.  (17)
Finish off leaving a long tail.  Sew Row 1 and Rw 4 together.  Whipstitch around top of SWORD SCABBARD with yellow.  Use yellow to sew bottom of SWORD SCABBARD closed.  Sew SWORD SCABBARD to left side of BELT.

SWORD HILT:
Rw 1: With yellow, ch 8, sc in second ch from hook and in each ch across.  (7)
Rws 2-3: Ch 1, turn; sc in each sc across.  (7)
Rw 4: Ch 1, turn; sc in each sc across, ch 10, slip st in first sc of Row 4.  (7)
Finish off leaving a long tail.  Sew Row 1 and Row 4 of SWORD HILT together.  Sew bottom of SWORD HILT closed.  Cut wooden skewer to desired.  Paint silver.  Glue SWORD HILT to wooden skewer.  Cut to two pieces of yellow craft foam in the form of a “C”.  Glue “C”s to SWORD above SWORD HILT.

MARTH and FIRE EMBLEM are copyright Nintendo and their respective creators.

This crochet pattern is an original pattern and is © by Christjan Bee (April 2016).  Please do not claim this pattern as your own.  If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site.  You may print and keep a copy for your own personal use but you may not sell or distribute it, or sell items made from this pattern.